Controllable Lamp (Signal) over Wireless LAN (Shelly)
The PCB (lamp) can be controlled over a Shelly wireless LAN module. It is attached to the PCB and can be controlled over the Web Control interface or any other software. Currently the lamp is designed for alerting. It changes the color within a given time. The lamp can be configured over the Lamp Control application. Also the attached PC can be informed that an alert (over wireless LAN) occurrs. The current firmware can be downloaded here. An ISP programmer for ATmega8 is necessary to flash the firmware onto the PCB.
| Program | Status |
|---|---|
| Web Control |  |
| Application |  |
 |
|
| Firmware |  |
| Board | Status |
|---|---|
| Schematic | ✔️ Done |
| Board | ✔️ Done |
| Partlist | ✔️ Done |
| Production | ✔️ Done |
| Assembly | ✔️ Done |
| Case | ❌ Open |
