An awesome list that curates the best Flutter libraries, tools, tutorials, articles and more.

Modifications to some BACnet library files to work under FreeRTOS.

BACnet Protocol Stack library provides a BACnet application layer, network layer and media access (MAC) layer communications services.

PlatformIO compilable version of https://github.com/espressif/esp-aws-iot/tree/master/examples/ota/ota_mqtt

GDB command to read the Cortex M0+ Micro Trace Buffer.

What to do when Hard fault hits? Debugger and error reporter solution for ARM Cortex M3 and M4.

A library for controlling Midea home appliances using the UART protocol.

A project for controlling midea like air conditioners with a micro controller like the esp32.

hack job for decoding and sending Midea AC Serial commands

A simple example using a virtual serial port in Linux

ESPHome is a system to control your ESP8266/ESP32 by simple yet powerful configuration files and control them remotely through Home Automation systems.

Ir Send - Updated for HVAC Mitsubishi & Panasonic IR

STM32 + FREERTOS + LWIP + MQTT example

C99 implementation of the MQTT 3.1.1 specification.

This code example demonstrates connecting to AWS IoT over MQTT using the AnyCloud SDK for PSoC 6 MCU and CYW43xxx connectivity devices.

Tiny, fast, non-dependent and fully loaded printf implementation for embedded systems. Extensive test suite passing.

Espressif X.509 MQTT Publisher specifically for connecting to AWS IoT via certificates.

ESP32 MQTT Client Publish and Subscribe using ESP-IDF

Wifi and MQTT handling for ESP8266 and ESP32

ESP32 MQTT sample project for

This project shows how to use the ESP32 to interact with the MQTT protocol in the IoT environment. For more information, refer to the article https://bit.ly/3a3t7xq

Eclipse Tahu addresses the existence of legacy SCADA/DCS/ICS protocols and infrastructures and provides a much-needed definition of how best to apply MQTT into these existing industrial operational…

esp-idf component wrapper for eclipse/paho.mqtt.embedded-c

Espressif's SDK for Matter

nRF Connect SDK main repository

Minimal code for a 'bare metal' ESP32 program which does not use ESP-IDF. Really just a learning exercise because the ESP-IDF is Apache-licensed and quite good; I just had trouble finding lower-lev…

A bare metal SDK for the ESP32 & ESP32C3

Example for testing out Google Fast Pair Service (GFPS) on an ESP32