Lotus58 glow (qmk#20386)

Co-authored-by: jack <[email protected]>
Co-authored-by: Joel Challis <[email protected]>
Co-authored-by: Pablo Martínez <[email protected]>

keyboards/tweetydabird/lotus58/config.h

@@ -0,0 +1,13 @@
+// Copyright 2022 Markus Knutsson (@TweetyDaBird)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+// Options not yet fully implemented in info.json
+#define RGBLIGHT_LIMIT_VAL 175
+#define RGBLIGHT_DEFAULT_VAL ( RGBLIGHT_LIMIT_VAL / 2 )
+
+#define SPLIT_HAND_PIN B5
+#define SPLIT_LAYER_STATE_ENABLE
+#define SPLIT_LED_STATE_ENABLE
+#define SPLIT_OLED_ENABLE

keyboards/tweetydabird/lotus58/elite_c/info.json

@@ -0,0 +1,3 @@
+{
+ "bootloader": "atmel-dfu"
+}

keyboards/tweetydabird/lotus58/elite_c/rules.mk

@@ -0,0 +1 @@
+# This file intentionally left blank

keyboards/tweetydabird/lotus58/info.json

@@ -0,0 +1,136 @@
+{
+ "manufacturer": "Tweetys Wild Thinking",
+ "keyboard_name": "Lotus 58 Glow (QMK)",
+ "maintainer": "TweetyDaBird",
+ "bootloader_instructions": "Short marked pads on PCB, or hold top-outer key when plugging in each hand.",
+ "build": {
+ "lto": true
+ },
+ "diode_direction": "COL2ROW",
+ "encoder": {
+ "rotary": [
+ { "pin_a": "F5", "pin_b": "F4", "resolution": 2 }
+ ]
+ },
+ "features": {
+ "bootmagic": true,
+ "command": false,
+ "console": false,
+ "extrakey": true,
+ "mousekey": true,
+ "nkro": true,
+ "oled": true,
+ "encoder": true,
+ "rgblight": true,
+ "split": true,
+ "tri_layer": true
+ },
+ "matrix_pins": {
+ "cols": ["B1", "B2", "B3", "B6", "F7", "F6"],
+ "rows": ["D4", "C6", "D7", "E6", "B4"]
+ },
+ "pin_compatible": "promicro",
+ "processor": "atmega32u4",
+ "rgblight": {
+ "led_count": 70,
+ "pin": "D3",
+ "split": true,
+ "split_count": [35, 35],
+ "sleep": true
+ },
+ "split": {
+ "bootmagic": {
+ "matrix": [5, 0]
+ },
+ "enabled": true,
+ "encoder": {
+ "right": {
+ "rotary": [
+ { "pin_a": "F4", "pin_b": "F5", "resolution": 2 }
+ ]
+ }
+ },
+ "soft_serial_pin": "D2",
+ "transport": {
+ "protocol": "serial",
+ "sync_matrix_state": true,
+ "sync_modifiers": true
+ },
+ "usb_detect": {
+ "enabled": true
+ }
+ },
+ "url": "https://lectronz.com/stores/tweetys-wild-thinking",
+ "usb": {
+ "vid": "0xFEED",
+ "pid": "0x23B0",
+ "device_version": "1.2.3",
+ "force_nkro": true
+ },
+ "layouts": {
+ "LAYOUT": {
+ "layout": [
+ { "label": "Esc", "matrix": [0, 0], "x": 0, "y": 0.75 },
+ { "label": "1", "matrix": [0, 1], "x": 1, "y": 0.5 },
+ { "label": "2", "matrix": [0, 2], "x": 2, "y": 0.25 },
+ { "label": "3", "matrix": [0, 3], "x": 3, "y": 0 },
+ { "label": "4", "matrix": [0, 4], "x": 4, "y": 0.25 },
+ { "label": "5", "matrix": [0, 5], "x": 5, "y": 0.5 },
+ { "label": "Left ENC", "matrix": [4, 0], "x": 6.25, "y": 0.75 },
+ { "label": "Right ENC", "matrix": [9, 0], "x": 7.75, "y": 0.75 },
+ { "label": "6", "matrix": [5, 5], "x": 9, "y": 0.5 },
+ { "label": "7", "matrix": [5, 4], "x": 10, "y": 0.25 },
+ { "label": "8", "matrix": [5, 3], "x": 11, "y": 0 },
+ { "label": "9", "matrix": [5, 2], "x": 12, "y": 0.25 },
+ { "label": "0", "matrix": [5, 1], "x": 13, "y": 0.5 },
+ { "label": "-", "matrix": [5, 0], "x": 14, "y": 0.75 },
+ { "label": "Tab", "matrix": [1, 0], "x": 0, "y": 1.75 },
+ { "label": "Q", "matrix": [1, 1], "x": 1, "y": 1.5 },
+ { "label": "W", "matrix": [1, 2], "x": 2, "y": 1.25 },
+ { "label": "E", "matrix": [1, 3], "x": 3, "y": 1 },
+ { "label": "R", "matrix": [1, 4], "x": 4, "y": 1.25 },
+ { "label": "T", "matrix": [1, 5], "x": 5, "y": 1.5 },
+ { "label": "Y", "matrix": [6, 5], "x": 9, "y": 1.5 },
+ { "label": "U", "matrix": [6, 4], "x": 10, "y": 1.25 },
+ { "label": "I", "matrix": [6, 3], "x": 11, "y": 1 },
+ { "label": "O", "matrix": [6, 2], "x": 12, "y": 1.25 },
+ { "label": "P", "matrix": [6, 1], "x": 13, "y": 1.5 },
+ { "label": "{", "matrix": [6, 0], "x": 14, "y": 1.75 },
+ { "label": "Caps Lock", "matrix": [2, 0], "x": 0, "y": 2.75 },
+ { "label": "A", "matrix": [2, 1], "x": 1, "y": 2.5 },
+ { "label": "S", "matrix": [2, 2], "x": 2, "y": 2.25 },
+ { "label": "D", "matrix": [2, 3], "x": 3, "y": 2 },
+ { "label": "F", "matrix": [2, 4], "x": 4, "y": 2.25 },
+ { "label": "G", "matrix": [2, 5], "x": 5, "y": 2.5 },
+ { "label": "H", "matrix": [7, 5], "x": 9, "y": 2.5 },
+ { "label": "J", "matrix": [7, 4], "x": 10, "y": 2.25 },
+ { "label": "K", "matrix": [7, 3], "x": 11, "y": 2 },
+ { "label": "L", "matrix": [7, 2], "x": 12, "y": 2.25 },
+ { "label": ":", "matrix": [7, 1], "x": 13, "y": 2.5 },
+ { "label": "\"", "matrix": [7, 0], "x": 14, "y": 2.75 },
+ { "label": "L_Ctrl", "matrix": [3, 0], "x": 0, "y": 3.75 },
+ { "label": "Z", "matrix": [3, 1], "x": 1, "y": 3.5 },
+ { "label": "X", "matrix": [3, 2], "x": 2, "y": 3.25 },
+ { "label": "C", "matrix": [3, 3], "x": 3, "y": 3 },
+ { "label": "V", "matrix": [3, 4], "x": 4, "y": 3.25 },
+ { "label": "B", "matrix": [3, 5], "x": 5, "y": 3.5 },
+ { "label": "Down", "matrix": [4, 5], "x": 6, "y": 3 },
+ { "label": "Up", "matrix": [9, 5], "x": 8, "y": 3 },
+ { "label": "N", "matrix": [8, 5], "x": 9, "y": 3.5 },
+ { "label": "M", "matrix": [8, 4], "x": 10, "y": 3.25 },
+ { "label": ",", "matrix": [8, 3], "x": 11, "y": 3 },
+ { "label": ".", "matrix": [8, 2], "x": 12, "y": 3.25 },
+ { "label": "?", "matrix": [8, 1], "x": 13, "y": 3.5 },
+ { "label": "R_Ctrl", "matrix": [8, 0], "x": 14, "y": 3.75 },
+ { "label": "Win", "matrix": [4, 1], "x": 2.5, "y": 4.25 },
+ { "label": "Lower", "matrix": [4, 2], "x": 3.5, "y": 4.25 },
+ { "label": "Alt", "matrix": [4, 3], "x": 4.5, "y": 4.5 },
+ { "label": "Space", "matrix": [4, 4], "x": 6, "y": 4.25, "h": 1.25 },
+ { "label": "Enter", "matrix": [9, 4], "x": 8, "y": 4.25, "h": 1.25 },
+ { "label": "AltGr", "matrix": [9, 3], "x": 9.5, "y": 4.5 },
+ { "label": "Raise", "matrix": [9, 2], "x": 10.5, "y": 4.25 },
+ { "label": "BckSp", "matrix": [9, 1], "x": 11.5, "y": 4.25 }
+ ]
+ }
+ }
+}

keyboards/tweetydabird/lotus58/keymaps/default/keymap.c

@@ -0,0 +1,86 @@
+// Copyright 2022 Markus Knutsson (@TweetyDaBird)
+// SPDX-License-Identifier: GPL-2.0-or-later
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [0] = LAYOUT(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_MPLY, KC_MPLY, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
+LCTL_T(KC_LEFT), KC_Z, KC_X, KC_C, KC_V, KC_B, KC_DOWN, KC_UP, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, RCTL_T(KC_RGHT),
+ KC_LGUI, TG(2), KC_LALT, LSFT_T(KC_SPC), RSFT_T(KC_ENT), KC_RALT, TG(1), RGUI_T(KC_BSPC)
+ ),
+
+ [1] = LAYOUT(
+ _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, _______, KC_CIRC, KC_KP_7, KC_KP_8, KC_KP_9, XXXXXXX, XXXXXXX,
+ _______, XXXXXXX, KC_UP, XXXXXXX, XXXXXXX, XXXXXXX, KC_HASH, KC_KP_4, KC_KP_5, KC_KP_6, XXXXXXX, XXXXXXX,
+ XXXXXXX, KC_LEFT, KC_DOWN, KC_RIGHT,KC_LBRC, KC_RBRC, KC_AMPR, KC_KP_1, KC_KP_2, KC_KP_3, XXXXXXX, XXXXXXX,
+ _______, XXXXXXX, KC_PAST, KC_PPLS, KC_PSLS, KC_EQL, _______, _______, KC_DLR, KC_KP_0, KC_PDOT, KC_COLN, KC_PMNS, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______ 
+ ),
+
+ [2] = LAYOUT(
+ _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, _______, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______
+ ),
+
+ [3] = LAYOUT(
+ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, RGB_MOD, RGB_SAI, RGB_TOG,
+ QK_BOOT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RGB_RMOD,RGB_SAD, RGB_M_P,
+ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_CAPS, XXXXXXX, XXXXXXX, XXXXXXX, RGB_HUI, RGB_VAI, RGB_M_B,
+ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RGB_HUD, RGB_VAD, RGB_M_R,
+ _______, _______, _______, _______, _______, _______, _______, _______ 
+ )
+};
+
+#if defined(ENCODER_MAP_ENABLE)
+const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][2] = {
+ [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(KC_VOLD, KC_VOLU) },
+ [1] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(KC_VOLD, KC_VOLU) },
+ [2] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(KC_VOLD, KC_VOLU) },
+ [3] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }
+};
+#endif
+
+#ifdef OLED_ENABLE
+static void print_status_narrow(void) {
+ // Create OLED content
+ oled_write_P(PSTR("\n"), false);
+ oled_write_P(PSTR(""), false);
+ oled_write_P(PSTR("Lotus -58-"), false);
+ oled_write_P(PSTR("\n"), false);
+
+ // Print current layer
+ oled_write_P(PSTR("Layer"), false);
+ switch (get_highest_layer(layer_state)) {
+ case 0:
+ oled_write_P(PSTR("-Base\n"), false);
+ break;
+ case 1:
+ oled_write_P(PSTR("-Num \n"), false);
+ break;
+ case 2:
+ oled_write_P(PSTR("-Func\n"), false);
+ break;
+ case 3:
+ oled_write_P(PSTR("-Sys \n"), false);
+ break;
+ default:
+ oled_write_P(PSTR("Undef"), false);
+ }
+
+ oled_write_P(PSTR("\n"), false);
+ led_t led_usb_state = host_keyboard_led_state();
+ oled_write_ln_P(PSTR("Caps- lock"), led_usb_state.caps_lock);
+
+}
+
+bool oled_task_user(void) {
+ // Render the OLED
+ print_status_narrow();
+ return false;
+}
+#endif

keyboards/tweetydabird/lotus58/keymaps/default/rules.mk

@@ -0,0 +1,2 @@
+ENCODER_MAP_ENABLE = yes
+AUTO_SHIFT_ENABLE = yes

keyboards/tweetydabird/lotus58/lotus58.c

@@ -0,0 +1,29 @@
+// Copyright 2022 Markus Knutsson (@TweetyDaBird)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "quantum.h"
+
+#ifdef OLED_ENABLE
+
+oled_rotation_t oled_init_kb(oled_rotation_t rotation) {
+ return OLED_ROTATION_90;
+}
+
+void render_logo(void) {
+ // QMK Logo
+ static const char PROGMEM qmk_logo[] = {
+ 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8A, 0x8B, 0x8C, 0x8D, 0x8E, 0x8F, 0x90, 0x91, 0x92, 0x93, 0x94,
+ 0xA0, 0xA1, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xA8, 0xA9, 0xAA, 0xAB, 0xAC, 0xAD, 0xAE, 0xAF, 0xB0, 0xB1, 0xB2, 0xB3, 0xB4,
+ 0xC0, 0xC1, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8, 0xC9, 0xCA, 0xCB, 0xCC, 0xCD, 0xCE, 0xCF, 0xD0, 0xD1, 0xD2, 0xD3, 0xD4, 0x00
+ };
+ oled_write_P(qmk_logo, false);
+}
+
+bool oled_task_kb(void) {
+ if (!oled_task_user()) {
+ return false;
+ }
+ render_logo();
+ return false;
+}
+#endif

keyboards/tweetydabird/lotus58/nanoboot/rules.mk

@@ -0,0 +1,2 @@
+BOOTLOADER = qmk-hid
+BOOTLOADER_SIZE = 512

keyboards/tweetydabird/lotus58/promicro/info.json

@@ -0,0 +1,3 @@
+{
+ "bootloader": "caterina"
+}

keyboards/tweetydabird/lotus58/promicro/rules.mk

@@ -0,0 +1 @@
+# This file intentionally left blank

keyboards/tweetydabird/lotus58/readme.md

@@ -0,0 +1,37 @@
+# Lotus 58 Glow
+
+![lotus58](https://i.imgur.com/WWgpp0Sh.jpeg)
+
+* Lotus 58 Glow is a fully programmable 58-key split, ortho-columnar keyboard with a 4x6 main matrix and 4+1 thumb-keys per hand. Optional support for one OLED screen per hand/side showing information such as active layer, CapsLock/NumLock etc. as well as one Rotary Encoder per hand, with optional placement.
+
+* Keyboard Maintainer: [TweetyDaBird](https://github.com/TweetyDaBird)
+* Hardware Supported: *Lotus 58 Glow v1.11 - 1.2x PCB, Pro Micro or pin-compatible*
+* Hardware Availability: [Lectronz Store](https://lectronz.com/stores/tweetys-wild-thinking)
+* Hardware Design: [GitHub](https://github.com/TweetyDaBird/Lotus58)
+
+
+#### This keyboard firmware contains three different versions, all for the same PCB/hardware, but depending on your choice of controller/bootloader. 
+
+
+* promicro - This uses the default Caterina bootloader.
+* elite_c - This uses the Atmel-DFU bootloader.
+* nanoBoot - A tiny 512 byte bootloader giving far more usable memory for features (can be used on both Elite C and Pro Micro).
+
+
+Make example for this keyboard (after setting up your build environment):
+
+ make tweetydabird/lotus58/promicro:default
+
+Flashing example for this keyboard:
+
+ make tweetydabird/lotus58/elite_c:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the top outer key for each hand as it is plugged in
+* **Physical reset**: Briefly short the marked pads on PCB
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if mapped (not in default keymap)