Bastard Keyboards: upstream recent changes (qmk#19083)

Co-authored-by: Simian <alex@Mandelbrot> Co-authored-by: Charly Delay <[email protected]> Co-authored-by: Alex Baldwin <[email protected]>
struckmb · Nov 20, 2022 · 2b0a3cd · 2b0a3cd
1 parent 127a70b
commit 2b0a3cd
Show file tree

Hide file tree

Showing 77 changed files with 587 additions and 889 deletions.
diff --git a/keyboards/bastardkb/charybdis/3x5/blackpill/info.json b/keyboards/bastardkb/charybdis/3x5/blackpill/info.json
@@ -1,6 +1,6 @@
 {
  "keyboard_name": "Charybdis Nano (3x5) Blackpill",
  "usb": {
- "device_version": "1.0.0",
- },
+  "device_version": "1.0.0"
+ }
 }
diff --git a/keyboards/bastardkb/charybdis/3x5/config.h b/keyboards/bastardkb/charybdis/3x5/config.h
@@ -31,17 +31,10 @@
 #define ROTATIONAL_TRANSFORM_ANGLE -25
 
 /* RGB settings. */
-#define RGBLED_NUM 36
-#define RGBLED_SPLIT \
- { 18, 18 }
-
-/* RGB matrix support. */
 #ifdef RGB_MATRIX_ENABLE
-# define SPLIT_TRANSPORT_MIRROR
+# define RGBLED_NUM 36
+# define RGBLED_SPLIT \
+ { 18, 18 }
 # define DRIVER_LED_TOTAL RGBLED_NUM
 # define RGB_MATRIX_SPLIT RGBLED_SPLIT
-# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 50
-# define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
-# define RGB_DISABLE_WHEN_USB_SUSPENDED
-# define RGB_MATRIX_KEYPRESSES
 #endif
diff --git a/keyboards/bastardkb/charybdis/3x5/info.json b/keyboards/bastardkb/charybdis/3x5/info.json
@@ -1,9 +1,9 @@
 {
- "url": "https://bastardkb.com/charybdis-nano",
  "manufacturer": "Bastard Keyboards",
+ "url": "https://bastardkb.com/charybdis-nano",
  "usb": {
- "vid": "0xA8F8",
  "pid": "0x1832",
+ "vid": "0xA8F8"
  },
  "layouts": {
  "LAYOUT_charybdis_3x5": {

diff --git a/keyboards/bastardkb/charybdis/3x5/keymaps/default/config.h b/keyboards/bastardkb/charybdis/3x5/keymaps/default/config.h
diff --git a/keyboards/bastardkb/charybdis/3x5/keymaps/via/config.h b/keyboards/bastardkb/charybdis/3x5/keymaps/via/config.h
@@ -24,49 +24,6 @@
 /* Disable unused features. */
 #define NO_ACTION_ONESHOT
 
-#ifndef TAPPING_TERM
-/**
- * \brief Configure the global tapping term (default: 200ms).
- *
- * If you have a lot of accidental mod activations, crank up the tapping term.
- *
- * See docs.qmk.fm/using-qmk/software-features/tap_hold#tapping-term
- */
-# define TAPPING_TERM 200
-#endif // TAPPING_TERM
-
-/**
- * \brief Enable rapid switch from tap to hold.
- *
- * Note that a side-effect of this setting is to disable auto-repeat when
- * pressing key twice, except for one-shot keys.
- *
- * See docs.qmk.fm/using-qmk/software-features/tap_hold#tapping-force-hold
- */
-#define TAPPING_FORCE_HOLD
-
-/*
- * Tap-or-Hold decision modes.
- *
- * Note that the following flags behave differently when combined (ie. when 2 or
- * more are enabled).
- *
- * See bit.ly/tap-or-hold for a visual explanation of the following tap-or-hold
- * decision modes.
- */
-
-/**
- * \brief Faster tap-hold trigger.
- *
- * Without `PERMISSIVE_HOLD`, within `TAPPING_TERM`:
- * Mod(a)🠗 e🠗 e🠕 Mod(a)🠕 ➞ ae
- * With `PERMISSIVE_HOLD`, within `TAPPING_TERM`:
- * Mod(a)🠗 e🠗 e🠕 Mod(a)🠕 ➞ Mod+e
- *
- * See docs.qmk.fm/using-qmk/software-features/tap_hold#permissive-hold
- */
-#define PERMISSIVE_HOLD
-
 /**
  * \brief Prevent normal rollover on alphas from accidentally triggering mods.
  *
@@ -76,8 +33,6 @@
  * Mod(a)🠗 e🠗 Mod(a)🠕 e🠕 ➞ Mod+e
  * With `IGNORE_MOD_TAP_INTERRUPT`, within `TAPPING_TERM`:
  * Mod(a)🠗 e🠗 Mod(a)🠕 e🠕 ➞ ae
- *
- * See docs.qmk.fm/using-qmk/software-features/tap_hold#ignore-mod-tap-interrupt
  */
 #define IGNORE_MOD_TAP_INTERRUPT
 
@@ -89,25 +44,3 @@
 // - `CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_THRESHOLD`
 // #define CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_ENABLE
 #endif // POINTING_DEVICE_ENABLE
-
-/* RGB Matrix. */
-
-#ifdef RGB_MATRIX_ENABLE
-// Limit maximum brightness to keep power consumption reasonable, and avoid
-// disconnects.
-# undef RGB_MATRIX_MAXIMUM_BRIGHTNESS
-# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 64
-
-// Rainbow swirl as startup mode.
-# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
-# define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT
-
-// Slow swirl at startup.
-# define RGB_MATRIX_STARTUP_SPD 32
-
-// Startup values.
-# define RGB_MATRIX_STARTUP_HUE 0
-# define RGB_MATRIX_STARTUP_SAT 255
-# define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
-# define RGB_MATRIX_STARTUP_HSV RGB_MATRIX_STARTUP_HUE, RGB_MATRIX_STARTUP_SAT, RGB_MATRIX_STARTUP_VAL
-#endif // RGB_MATRIX_ENABLE
diff --git a/keyboards/bastardkb/charybdis/3x5/v1/elitec/info.json b/keyboards/bastardkb/charybdis/3x5/v1/elitec/info.json
@@ -1,6 +1,6 @@
 {
  "keyboard_name": "Charybdis Nano (3x5) Elite-C",
  "usb": {
- "device_version": "1.0.0",
- },
+  "device_version": "1.0.0"
+ }
 }
diff --git a/keyboards/bastardkb/charybdis/3x5/v2/elitec/info.json b/keyboards/bastardkb/charybdis/3x5/v2/elitec/info.json
@@ -1,6 +1,6 @@
 {
  "keyboard_name": "Charybdis Nano (3x5) Elite-C",
  "usb": {
- "device_version": "2.0.0",
- },
+  "device_version": "2.0.0"
+ }
 }
diff --git a/keyboards/bastardkb/charybdis/3x5/v2/splinky/config.h b/keyboards/bastardkb/charybdis/3x5/v2/splinky/config.h
@@ -21,14 +21,6 @@
 #define MATRIX_ROW_PINS \
  { GP26, GP5, GP4, GP9 }
 
-/* Handedness. */
-#define MASTER_RIGHT
-
-// To use the handedness pin, resistors need to be installed on the adapter PCB.
-// If so, uncomment the following code, and undefine MASTER_RIGHT above.
-// #define SPLIT_HAND_PIN GP13
-// #define SPLIT_HAND_PIN_LOW_IS_LEFT // High -> right, Low -> left.
-
 /* serial.c configuration (for split keyboard). */
 #define SOFT_SERIAL_PIN GP1
 
@@ -43,68 +35,3 @@
 #define RP2040_BOOTLOADER_DOUBLE_TAP_RESET
 #define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_LED GP17
 #define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 1000U
-
-/** RGB Matrix. */
-
-#ifdef RGB_MATRIX_ENABLE
-// Enable all animations on ARM boards since they have plenty of memory
-// available for it.
-# define ENABLE_RGB_MATRIX_ALPHAS_MODS
-# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
-# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
-# define ENABLE_RGB_MATRIX_BREATHING
-# define ENABLE_RGB_MATRIX_BAND_SAT
-# define ENABLE_RGB_MATRIX_BAND_VAL
-# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
-# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
-# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
-# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
-# define ENABLE_RGB_MATRIX_CYCLE_ALL
-# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
-# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
-# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
-# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
-# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
-# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
-# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
-# define ENABLE_RGB_MATRIX_DUAL_BEACON
-# define ENABLE_RGB_MATRIX_RAINBOW_BEACON
-# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
-# define ENABLE_RGB_MATRIX_RAINDROPS
-# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
-# define ENABLE_RGB_MATRIX_HUE_BREATHING
-# define ENABLE_RGB_MATRIX_HUE_PENDULUM
-# define ENABLE_RGB_MATRIX_HUE_WAVE
-# define ENABLE_RGB_MATRIX_TYPING_HEATMAP
-# define ENABLE_RGB_MATRIX_DIGITAL_RAIN
-# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
-# define ENABLE_RGB_MATRIX_SOLID_REACTIVE
-# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
-# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
-# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
-# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
-# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
-# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
-# define ENABLE_RGB_MATRIX_SPLASH
-# define ENABLE_RGB_MATRIX_MULTISPLASH
-# define ENABLE_RGB_MATRIX_SOLID_SPLASH
-# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
-
-// Limit maximum brightness to keep power consumption reasonable, and avoid
-// disconnects.
-# undef RGB_MATRIX_MAXIMUM_BRIGHTNESS
-# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 64
-
-// Rainbow swirl as startup mode.
-# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
-# define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT
-
-// Slow swirl at startup.
-# define RGB_MATRIX_STARTUP_SPD 32
-
-// Startup values.
-# define RGB_MATRIX_STARTUP_HUE 0
-# define RGB_MATRIX_STARTUP_SAT 255
-# define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
-# define RGB_MATRIX_STARTUP_HSV RGB_MATRIX_STARTUP_HUE, RGB_MATRIX_STARTUP_SAT, RGB_MATRIX_STARTUP_VAL
-#endif // RGB_MATRIX_ENABLE
diff --git a/keyboards/bastardkb/charybdis/3x5/v2/splinky/info.json b/keyboards/bastardkb/charybdis/3x5/v2/splinky/info.json
@@ -1,6 +1,6 @@
 {
  "keyboard_name": "Charybdis Nano (3x5) Splinky",
  "usb": {
- "device_version": "2.0.0",
- },
+  "device_version": "2.0.0"
+ }
 }
diff --git a/keyboards/bastardkb/charybdis/3x5/v2/splinky/v2/config.h b/keyboards/bastardkb/charybdis/3x5/v2/splinky/v2/config.h
@@ -25,3 +25,11 @@
 #define SPI_SCK_PIN GP18
 #define SPI_MOSI_PIN GP19
 #define POINTING_DEVICE_CS_PIN GP14
+
+/* Handedness. */
+#define MASTER_RIGHT
+
+// To use the handedness pin, resistors need to be installed on the adapter PCB.
+// If so, uncomment the following code, and undefine MASTER_RIGHT above.
+// #define SPLIT_HAND_PIN GP13
+// #define SPLIT_HAND_PIN_LOW_IS_LEFT // High -> right, Low -> left.
diff --git a/keyboards/bastardkb/charybdis/3x5/v2/splinky/v3/config.h b/keyboards/bastardkb/charybdis/3x5/v2/splinky/v3/config.h
@@ -25,3 +25,11 @@
 #define SPI_SCK_PIN GP22
 #define SPI_MOSI_PIN GP23
 #define POINTING_DEVICE_CS_PIN GP16
+
+/* Handedness. */
+#define MASTER_RIGHT
+
+// To use the handedness pin, resistors need to be installed on the adapter PCB.
+// If so, uncomment the following code, and undefine MASTER_RIGHT above.
+// #define SPLIT_HAND_PIN GP15
+// #define SPLIT_HAND_PIN_LOW_IS_LEFT // High -> right, Low -> left.
diff --git a/keyboards/bastardkb/charybdis/3x5/v2/stemcell/info.json b/keyboards/bastardkb/charybdis/3x5/v2/stemcell/info.json
@@ -1,6 +1,6 @@
 {
  "keyboard_name": "Charybdis Nano (3x5) STeMCell",
  "usb": {
- "device_version": "2.0.0"
+  "device_version": "2.0.0"
  }
 }
diff --git a/keyboards/bastardkb/charybdis/3x6/blackpill/info.json b/keyboards/bastardkb/charybdis/3x6/blackpill/info.json
@@ -1,6 +1,6 @@
 {
  "keyboard_name": "Charybdis Mini (3x6) Blackpill",
  "usb": {
- "device_version": "1.0.0",
- },
+  "device_version": "1.0.0"
+ }
 }
diff --git a/keyboards/bastardkb/charybdis/3x6/config.h b/keyboards/bastardkb/charybdis/3x6/config.h
@@ -18,8 +18,6 @@
 
 #pragma once
 
-#include "config_common.h"
-
 /* Key matrix configuration. */
 #define MATRIX_ROWS 8 // Rows are doubled-up.
 #define MATRIX_COLS 6
@@ -33,17 +31,10 @@
 #define ROTATIONAL_TRANSFORM_ANGLE -25
 
 /* RGB settings. */
-#define RGBLED_NUM 42
-#define RGBLED_SPLIT \
- { 21, 21 }
-
-/* RGB matrix support. */
 #ifdef RGB_MATRIX_ENABLE
-# define SPLIT_TRANSPORT_MIRROR
+# define RGBLED_NUM 42
+# define RGBLED_SPLIT \
+ { 21, 21 }
 # define DRIVER_LED_TOTAL RGBLED_NUM
 # define RGB_MATRIX_SPLIT RGBLED_SPLIT
-# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 50
-# define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
-# define RGB_DISABLE_WHEN_USB_SUSPENDED
-# define RGB_MATRIX_KEYPRESSES
 #endif