[F1] Update STM32F1xx CMSIS to v4.3.1

Included in STM32CubeF1 FW V1.8.0

Note: Trailing spaces have been cleaned.

Signed-off-by: Frederic.Pillon <[email protected]>

system/Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h

@@ -2,45 +2,27 @@
  ******************************************************************************
  * @file stm32f1xx.h
  * @author MCD Application Team
- * @version V4.2.0
- * @date 31-March-2017
- * @brief CMSIS STM32F1xx Device Peripheral Access Layer Header File. 
+ * @brief CMSIS STM32F1xx Device Peripheral Access Layer Header File.
  *
  * The file is the unique include file that the application programmer
  * is using in the C source code, usually in main.c. This file contains:
  * - Configuration section that allows to select:
  * - The STM32F1xx device used in the target application
- * - To use or not the peripheral’s drivers in application code(i.e. 
- * code will be based on direct access to peripheral’s registers 
- * rather than drivers API), this option is controlled by 
+ * - To use or not the peripheral’s drivers in application code(i.e.
+ * code will be based on direct access to peripheral’s registers
+ * rather than drivers API), this option is controlled by
  * "#define USE_HAL_DRIVER"
- * 
+ *
  ******************************************************************************
  * @attention
  *
- * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
+ * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+ * All rights reserved.</center></h2>
  *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
  *
  ******************************************************************************
  */
@@ -52,14 +34,14 @@
 /** @addtogroup stm32f1xx
  * @{
  */
- 
+
 #ifndef __STM32F1XX_H
 #define __STM32F1XX_H
 
 #ifdef __cplusplus
  extern "C" {
 #endif /* __cplusplus */
- 
+
 /** @addtogroup Library_configuration_section
  * @{
  */
@@ -71,8 +53,8 @@
 #define STM32F1
 #endif /* STM32F1 */
 
-/* Uncomment the line below according to the target STM32L device used in your 
- application 
+/* Uncomment the line below according to the target STM32L device used in your
+ application
  */
 
 #if !defined (STM32F100xB) && !defined (STM32F100xE) && !defined (STM32F101x6) && \
@@ -82,7 +64,7 @@
  /* #define STM32F100xE */ /*!< STM32F100RC, STM32F100VC, STM32F100ZC, STM32F100RD, STM32F100VD, STM32F100ZD, STM32F100RE, STM32F100VE and STM32F100ZE */
  /* #define STM32F101x6 */ /*!< STM32F101C4, STM32F101R4, STM32F101T4, STM32F101C6, STM32F101R6 and STM32F101T6 Devices */
  /* #define STM32F101xB */ /*!< STM32F101C8, STM32F101R8, STM32F101T8, STM32F101V8, STM32F101CB, STM32F101RB, STM32F101TB and STM32F101VB */
- /* #define STM32F101xE */ /*!< STM32F101RC, STM32F101VC, STM32F101ZC, STM32F101RD, STM32F101VD, STM32F101ZD, STM32F101RE, STM32F101VE and STM32F101ZE */ 
+ /* #define STM32F101xE */ /*!< STM32F101RC, STM32F101VC, STM32F101ZC, STM32F101RD, STM32F101VD, STM32F101ZD, STM32F101RE, STM32F101VE and STM32F101ZE */
  /* #define STM32F101xG */ /*!< STM32F101RF, STM32F101VF, STM32F101ZF, STM32F101RG, STM32F101VG and STM32F101ZG */
  /* #define STM32F102x6 */ /*!< STM32F102C4, STM32F102R4, STM32F102C6 and STM32F102R6 */
  /* #define STM32F102xB */ /*!< STM32F102C8, STM32F102R8, STM32F102CB and STM32F102RB */
@@ -91,29 +73,29 @@
  /* #define STM32F103xE */ /*!< STM32F103RC, STM32F103VC, STM32F103ZC, STM32F103RD, STM32F103VD, STM32F103ZD, STM32F103RE, STM32F103VE and STM32F103ZE */
  /* #define STM32F103xG */ /*!< STM32F103RF, STM32F103VF, STM32F103ZF, STM32F103RG, STM32F103VG and STM32F103ZG */
  /* #define STM32F105xC */ /*!< STM32F105R8, STM32F105V8, STM32F105RB, STM32F105VB, STM32F105RC and STM32F105VC */
- /* #define STM32F107xC */ /*!< STM32F107RB, STM32F107VB, STM32F107RC and STM32F107VC */ 
+ /* #define STM32F107xC */ /*!< STM32F107RB, STM32F107VB, STM32F107RC and STM32F107VC */
 #endif
 
 /* Tip: To avoid modifying this file each time you need to switch between these
  devices, you can define the device in your toolchain compiler preprocessor.
  */
- 
+
 #if !defined (USE_HAL_DRIVER)
 /**
  * @brief Comment the line below if you will not use the peripherals drivers.
- In this case, these drivers will not be included and the application code will 
- be based on direct access to peripherals registers 
+ In this case, these drivers will not be included and the application code will
+ be based on direct access to peripherals registers
  */
  /*#define USE_HAL_DRIVER */
 #endif /* USE_HAL_DRIVER */
 
 /**
- * @brief CMSIS Device version number V4.2.0
+ * @brief CMSIS Device version number V4.3.1
  */
 #define __STM32F1_CMSIS_VERSION_MAIN (0x04) /*!< [31:24] main version */
-#define __STM32F1_CMSIS_VERSION_SUB1 (0x02) /*!< [23:16] sub1 version */
-#define __STM32F1_CMSIS_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */
-#define __STM32F1_CMSIS_VERSION_RC (0x00) /*!< [7:0] release candidate */ 
+#define __STM32F1_CMSIS_VERSION_SUB1 (0x03) /*!< [23:16] sub1 version */
+#define __STM32F1_CMSIS_VERSION_SUB2 (0x01) /*!< [15:8] sub2 version */
+#define __STM32F1_CMSIS_VERSION_RC (0x00) /*!< [7:0] release candidate */
 #define __STM32F1_CMSIS_VERSION ((__STM32F1_CMSIS_VERSION_MAIN << 24)\
  |(__STM32F1_CMSIS_VERSION_SUB1 << 16)\
  |(__STM32F1_CMSIS_VERSION_SUB2 << 8 )\
@@ -165,24 +147,24 @@
 
 /** @addtogroup Exported_types
  * @{
- */ 
-typedef enum 
+ */
+typedef enum
 {
- RESET = 0, 
+ RESET = 0,
  SET = !RESET
 } FlagStatus, ITStatus;
 
-typedef enum 
+typedef enum
 {
- DISABLE = 0, 
+ DISABLE = 0,
  ENABLE = !DISABLE
 } FunctionalState;
 #define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
 
-typedef enum 
+typedef enum
 {
- ERROR = 0, 
- SUCCESS = !ERROR
+ SUCCESS = 0U,
+ ERROR = !SUCCESS
 } ErrorStatus;
 
 /**
@@ -207,7 +189,7 @@ typedef enum
 
 #define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
 
-#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL))) 
+#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL)))
 
 
 /**
@@ -231,7 +213,7 @@ typedef enum
 /**
  * @}
  */
- 
+
 
 
 

system/Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h

@@ -2,35 +2,17 @@
  ******************************************************************************
  * @file system_stm32f10x.h
  * @author MCD Application Team
- * @version V4.2.0
- * @date 31-March-2017
  * @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Header File.
  ******************************************************************************
  * @attention
  *
- * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+ * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+ * All rights reserved.</center></h2>
  *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
  *
  ******************************************************************************
  */
@@ -41,8 +23,8 @@
 
 /** @addtogroup stm32f10x_system
  * @{
- */ 
- 
+ */
+
 /**
  * @brief Define to prevent recursive inclusion
  */
@@ -51,7 +33,7 @@
 
 #ifdef __cplusplus
  extern "C" {
-#endif 
+#endif
 
 /** @addtogroup STM32F10x_System_Includes
  * @{
@@ -93,7 +75,7 @@ extern const uint8_t APBPrescTable[8U]; /*!< APB prescalers table values */
 /** @addtogroup STM32F10x_System_Exported_Functions
  * @{
  */
- 
+
 extern void SystemInit(void);
 extern void SystemCoreClockUpdate(void);
 /**
@@ -109,8 +91,8 @@ extern void SystemCoreClockUpdate(void);
 /**
  * @}
  */
- 
+
 /**
  * @}
- */ 
+ */
 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

system/Drivers/CMSIS/Device/ST/STM32F1xx/Release_Notes.html

@@ -13,6 +13,9 @@
 
 
 
+
+
+
 <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
 <link rel="File-List" href="Release_Notes%20%28package%29_files/filelist.xml">
 <link rel="Edit-Time-Data" href="Release_Notes%20%28package%29_files/editdata.mso"><!--[if !mso]> <style> v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} </style> <![endif]--><title>Release Notes for STM32L1xx CMSIS</title><!--[if gte mso 9]><xml> <o:DocumentProperties> <o:Author>STMicroelectronics</o:Author> <o:LastAuthor>tguilhot</o:LastAuthor> <o:Revision>145</o:Revision> <o:TotalTime>461</o:TotalTime> <o:Created>2009-02-27T19:26:00Z</o:Created> <o:LastSaved>2010-12-13T14:14:00Z</o:LastSaved> <o:Pages>1</o:Pages> <o:Words>358</o:Words> <o:Characters>2045</o:Characters> <o:Company>STMicroelectronics</o:Company> <o:Lines>17</o:Lines> <o:Paragraphs>4</o:Paragraphs> <o:CharactersWithSpaces>2399</o:CharactersWithSpaces> <o:Version>11.9999</o:Version> </o:DocumentProperties> </xml><![endif]--><!--[if gte mso 9]><xml> <w:WordDocument> <w:View>Normal</w:View> <w:SpellingState>Clean</w:SpellingState> <w:GrammarState>Clean</w:GrammarState> <w:ValidateAgainstSchemas/> <w:SaveIfXMLInvalid>false</w:SaveIfXMLInvalid> <w:IgnoreMixedContent>false</w:IgnoreMixedContent> <w:AlwaysShowPlaceholderText>false</w:AlwaysShowPlaceholderText> <w:Compatibility> <w:UseFELayout/> </w:Compatibility> <w:BrowserLevel>MicrosoftInternetExplorer4</w:BrowserLevel> </w:WordDocument> </xml><![endif]--><!--[if gte mso 9]><xml> <w:LatentStyles DefLockedState="false" LatentStyleCount="156"> </w:LatentStyles> </xml><![endif]-->
@@ -271,7 +274,7 @@
 <div align="center">
 <table class="MsoNormalTable" style="width: 675pt;" border="0" cellpadding="0" cellspacing="0" width="900">
 <tbody>
-<tr style="">
+<tr>
 <td style="padding: 0cm;" valign="top">
 <table class="MsoNormalTable" style="width: 675pt;" border="0" cellpadding="0" cellspacing="0" width="900">
 <tbody>
@@ -294,7 +297,63 @@ <h1 style="margin-bottom: 18pt; text-align: center;" align="center"><span style=
 <tr>
 <td style="padding: 0cm;" valign="top">
 <span style="font-family: &quot;Times New Roman&quot;;"></span>
-<h2 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial;"><a name="History"></a><span style="font-size: 12pt; color: white;">Update History</span></h2><h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 180px;"><span style="font-size: 10pt; font-family: Arial; color: white;">V4.3.0 / 09-October-2018 <o:p></o:p></span></h3>
+<h2 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial;"><a name="History"></a><span style="font-size: 12pt; color: white;">Update History</span></h2>
+ <h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 180px;"><span style="font-size: 10pt; font-family: Arial; color: white;">V4.3.1 / 26-June-2019 <o:p></o:p></span></h3>
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ <p class="MsoNormal" style="margin: 4.5pt 0cm 4.5pt 18pt;"><b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;">Main
+Changes</span></u></b></p>
+ <ul>
+ <li class="MsoNormal" style="margin: 4.5pt 0in; font-size: 12pt; font-family: &quot;Times New Roman&quot;; color: black;"><span style="font-size: 10pt; font-family: Verdana;">Fix </span><span style="font-size: 10pt; font-family: Verdana;">MISRA C 2012 Compilation errors: update to use </span><span style="font-size: 10pt; font-family: Verdana;">"UL" postfix for bits mask definitions(_Msk) and memory/peripheral base addresses</span></li>
+ <li class="MsoNormal" style="margin: 4.5pt 0in; font-size: 12pt; font-family: &quot;Times New Roman&quot;; color: black;"><span style="font-size: 10pt; font-family: Verdana;">Fix wrong initialization value for "SystemCoreClock" in System_stm32f1xx.c file<br>
+</span></li>
+
+ <li class="MsoNormal" style="margin: 4.5pt 0in; font-size: 12pt; font-family: &quot;Times New Roman&quot;; color: black;"><span style="font-size: 10pt; font-family: Verdana;">Update gcc linker file template to be aligned with AC6 linker file template</span></li><li class="MsoNormal" style="margin: 4.5pt 0in; font-size: 12pt; font-family: &quot;Times New Roman&quot;; color: black;"><span style="font-size: 10pt; font-family: Verdana;">stm32f1xx.h</span></li><ul><li class="MsoNormal" style="margin: 4.5pt 0in; font-size: 12pt; font-family: &quot;Times New Roman&quot;; color: black;"><span style="font-size: 10pt; font-family: Verdana;">Align ErrorStatus typedef to common error handling<br></span></li></ul><li class="MsoNormal" style="margin: 4.5pt 0in; font-size: 12pt; font-family: &quot;Times New Roman&quot;; color: black;"><span style="font-size: 10pt; font-family: Verdana;">TIM:</span></li>
+ <ul>
+<li class="MsoNormal" style="margin: 4.5pt 0in; font-size: 12pt; font-family: &quot;Times New Roman&quot;; color: black;"><span style="font-family: Verdana,sans-serif; font-size: 10pt;">Update IS_TIM_SLAVE_INSTANCE() macro to add reference to TIM9 instance</span><span style="font-family: Verdana,sans-serif; font-size: 10pt;"></span><br>
+</li>
+ </ul>
+ <li class="MsoNormal" style="margin: 4.5pt 0in; font-size: 12pt; font-family: &quot;Times New Roman&quot;; color: black;"><span style="font-size: 10pt; font-family: Verdana;">SDMMC:</span></li>
+ <ul>
+ <li class="MsoNormal" style="margin: 4.5pt 0in; font-size: 12pt; font-family: &quot;Times New Roman&quot;; color: black;"><span style="font-family: Verdana,sans-serif; font-size: 10pt;">Re</span><span style="font-family: Verdana,sans-serif; font-size: 10pt;">move SDIO_TypeDef() structure, SDIO_BASE define and SDIO Bits definitions : feature not available on all devices <br>
+except <span style="font-weight: bold;">STM32F103xE</span> and </span><span style="font-family: Verdana,sans-serif; font-size: 10pt; font-weight: bold;">STM32F103xG</span></li>
+ </ul>
+ <li class="MsoNormal" style="margin: 4.5pt 0in; font-size: 12pt; font-family: &quot;Times New Roman&quot;; color: black;"><span style="font-family: Verdana,sans-serif; font-size: 10pt;">USB:</span></li>
+ <ul>
+ <li class="MsoNormal" style="margin-top: 4.5pt; margin-bottom: 4.5pt; color: black;"><span style="font-family: Verdana,sans-serif; font-size: 10pt;">Add new PCD/HCD macros:</span></li>
+ <ul>
+ <li class="MsoNormal" style="margin-top: 4.5pt; margin-bottom: 4.5pt; color: black;"><span style="font-family: Verdana,sans-serif; font-size: 10pt;">&nbsp;</span><span style="font-family: Verdana,sans-serif; font-size: 10pt;">IS_PCD_ALL_INSTANCE()</span></li>
+ <li class="MsoNormal" style="margin-top: 4.5pt; margin-bottom: 4.5pt; color: black;"><span style="font-family: Verdana,sans-serif; font-size: 10pt;">IS_HCD_ALL_INSTANCE()</span></li>
+ </ul>
+ </ul>
+ <li class="MsoNormal" style="margin-top: 4.5pt; margin-bottom: 4.5pt; color: black;"><span style="font-family: Verdana,sans-serif; font-size: 10pt;">SPI:</span></li>
+ <ul>
+ <li class="MsoNormal" style="margin-top: 4.5pt; margin-bottom: 4.5pt; color: black;"><span style="font-family: Verdana,sans-serif; font-size: 10pt;">Add new SPI_CRC_ERROR_WORKAROUND_FEATURE define to enable SPI CRC workaround feature for <span style="font-weight: bold;">STM32F101xE/STM32F103xE</span> devices <br>
+ </span></li>
+ </ul>
+ </ul>
+ <h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 180px;"><span style="font-size: 10pt; font-family: Arial; color: white;">V4.3.0 / 09-October-2018 <o:p></o:p></span></h3>
+