Optax is a gradient processing and optimization library for JAX.

Optax is designed to facilitate research by providing building blocks that can be easily recombined in custom ways.

Our goals are to:

• provide simple, well-tested, efficient implementations of core components,
• improve research productivity by enabling to easily combine low level ingredients into custom optimiser (or other gradient processing components).
• accelerate adoption of new ideas by making it easy for anyone to contribute.

We favour focusing on small composable building blocks that can be effectively combined into custom solutions. Others may build upon these basic components more complicated abstractions. Whenever reasonable, implementations prioritise readability and structuring code to match standard equations, over code reuse.

An initial prototype of this library was made available in JAX's experimental folder as jax.experimental.optix. Given the wide adoption across DeepMind of optix, and after a few iterations on the API, optix was eventually moved out of experimental as a standalone open-source library, renamed optax.

Optax can be installed with pip directly from github, with the following command:

pip install git+git:https://github.com/deepmind/optax.git

or from PyPI:

pip install optax

One of the key building blocks of optax is a GradientTransformation.

Each transformation is defined two functions:

• state = init(params)
• grads, state = update(grads, state, params=None)

The init function initializes a (possibly empty) set of statistics (aka state) and the update function transforms a candidate gradient given some statistics, and (optionally) the current value of the parameters.

For example:

tx = scale_by_rms()
state = tx.init(params)  # init stats
grads, state = tx.update(grads, state, params)  # transform & update stats.

The fact that transformations take candidate gradients as input and return processed gradients as output (in contrast to returning the updated parameters) is critical to allow to combine arbitrary transformations into a custom optimiser / gradient processor, and also allows to combine transformations for different gradients that operate on a shared set of variables.

For instance, chain combines them sequentially, and returns a new GradientTransformation that applies several transformations in sequence.

For example:

my_optimiser = chain(
    clip_by_global_norm(max_norm),
    scale_by_adam(eps=1e-4),
    scale(-learning_rate))

Many popular transformations use time dependent components, e.g. to anneal some hyper-parameter (e.g. the learning rate). Optax provides for this purpose schedules that can be used to decay scalars as a function of a step count.

For example you many use a polynomial schedule (with power=1) to decay a hyper-parameter linearly over a number of steps:

schedule_fn = polynomial_schedule(
    init_value=1., end_value=0., power=1, transition_steps=5)

for step_count in range(6):
  print(schedule_fn(step_count))  # [1., 0.8, 0.6, 0.4, 0.2, 0.]

Schedules are used by certain gradient transformation, for instance:

schedule_fn = polynomial_schedule(
    init_value=-learning_rate, end_value=0., power=1, transition_steps=5)
optimiser = chain(
    clip_by_global_norm(max_norm),
    scale_by_adam(eps=1e-4),
    scale_by_schedule(schedule_fn))

In addition to the low level building blocks we also provide aliases for popular optimisers built using these components (e.g. RMSProp, Adam, AdamW, etc, ...). These are all still instances of a GradientTransformation, and can therefore be further combined with any of the individual building blocks.

For example:

def adamw(learning_rate, b1, b2, eps, weight_decay):
  return chain(
      scale_by_adam(b1=b1, b2=b2, eps=eps),
      scale_and_decay(-learning_rate, weight_decay=weight_decay))

An apply_updates function can be used to eventually apply the transformed gradients to the set of parameters of interest.

updates, state = tx.update(grads, state, params)  # transform & update stats.
new_params = optax.apply_updates(params, updates)  # update the parameters.

Note that separating gradient transformations from the parameter update is critical to support composing sequence of transformations (e.g. chain), as well as combine multiple updates to the same parameters (e.g. in multi-task settings where different tasks need different sets of gradient transformations).

Computing the Hessian or Fisher information matrices for neural networks is typically intractable due to the quadratic memory requirements. Solving for the diagonals of these matrices is often a better solution. The library offers functions for computing these diagonals with sub-quadratic memory requirements.

Stochastic gradient estimators compute Monte Carlo estimates of gradients of the expectation of a function under a distribution with respect to the distribution's parameters.

Unbiased estimators such as the score function estimator (REINFORCE), pathwise estimator (reparametrization trick) or measure valued estimator are implemented: score_function_jacobians, pathwise_jacobians and measure_valued_jacobians. Their applicability (both in terms of functions and distributions) is discussed in their respective documentation.

Stochastic gradient estimators can be combined with common control variates for variance reduction via control_variates_jacobians. For provided control variates see delta and moving_avg_baseline.

The result of a gradient estimator or control_variates_jacobians contains the Jacobians of the function with respect to the samples from the input distribution. These can then be used to update distributional parameters, or to assess gradient variance.

Example of how to use the pathwise_jacobians estimator:

  dist_params = [mean, log_scale]
  function = lambda x: jnp.sum(x * weights)
  jacobians = pathwise_jacobians(
        function, dist_params,
        utils.multi_normal, rng, num_samples)

  mean_grads = jnp.mean(jacobians[0], axis=0)
  log_scale_grads = jnp.mean(jacobians[1], axis=0)
  grads = [mean_grads, log_scale_grads]
  optim_update, optim_state = optim.update(grads, optim_state)
  updated_dist_params = optax.apply_updates(dist_params, optim_update)

where optim is an optax optimizer.

To cite this repository:

@software{optax2020github,
  author = {Matteo Hessel and David Budden and Fabio Viola and Mihaela Rosca
            and Eren Sezener and Tom Hennigan},
  title = {Optax: composable gradient transformation and optimisation, in JAX!},
  url = {https://github.com/deepmind/optax},
  version = {0.0.1},
  year = {2020},
}

In this bibtex entry, the version number is intended to be from optax/__init__.py, and the year corresponds to the project's open-source release.