Serial Enabled LCD Backpack (LCD-00258)

This PIC-based serial enabled LCD backpack allows you to control a parallel based LCD over a single-wire serial interface. It is compatible with 16x2 LCDs and 20x4 LCDs.

• /Firmware
  • /Arduino_Examples - Arduino example code to control the PIC-based serial enabled LCD
  • /Default_Firmware - Any default firmware on the PIC that the part ships with for different size LCD screens
• /Hardware - All Eagle design files (.brd, .sch, .STL)

• Hookup Guide - Basic hookup guide for the PIC-based serial enabled LCD backpack.

• LCD-00258 - SparkFun Serial Enabled LCD Backpack

• Built-In Serial Enabled LCD

  • LCD-09067 - Built-In SparkFun Serial Enabled 16x2 LCD - White on Black 3.3V
  • LCD-09066 - Built-In SparkFun Serial Enabled 16x2 LCD - Black on Green 3.3V
  • LCD-09068 - Built-In SparkFun Serial Enabled 16x2 LCD - Red on Black 3.3V
  • LCD-09395 - Built-In SparkFun Serial Enabled 16x2 LCD - Whote on Black 5V
  • LCD-09568 - Built-In SparkFun Serial Enabled 20x4 LCD - Black on Green 5V
  • LCD-09394 - Built-In SparkFun Serial Enabled 16x2 LCD - Red on Black 5V

The hardware is released under Creative Commons ShareAlike 4.0 International. The code is beerware; if you see me (or any other SparkFun employee) at the local, and you've found our code helpful, please buy us a round!

Distributed as-is; no warranty is given.