An Efficient Serial Console Menu Library for Arduino
Anouncement post on the Arduino forum
https://forum.arduino.cc/index.php?topic=645999.0
Blog entry and discussion
https://wordpress.com/post/dntruong.wordpress.com/1029
This library allows you to define menus for the Arduino Serial console.
The menus are very simple to build. You just declare them in an array.
The menus are simple to run. A single call to a show() method displays them. A single call to the run() function inside loop() is all it takes to automatically monitor the user's menu inputs and execute the appropriate callback function associated to the menu entry selected.
Multiple menus can be defined, and can be nested and called easily, just by calling the load() method.
The menus are non-blocking. Code only trigger when there is user input. This means run() returns immediately if there's no activity, or just after calling the callback routine if there was user input. This allows programs to simultaneously go about the work you want them to do while responding to serial commands promptly, but with almost no overhead.
Furthermore because of how the menu library is implemented, the memory consumed for the menus, even big ones, is minimal.
- Simple to declare a menu as a global variable
- One call to display the menu
- Easily support sub-menu hierarchies
- Compact user code
- Tiny SRAM data memory consumption
- Menu text can be stored in SRAM or Flash (data or program memory)
To demonstrate the efficiency of this library, it was added to one of the existing examples shipped with the Arduino IDE, and we compared the memory footprint to figure out the actual overhead.
This analysis is for the following configuration:
- Example program: 07.Display -> barGraph
- Platform: Arduino UNO
- SerialMenu version 1.0 released Nov. 12 2019.
Overhead Results:
- Low 5 Bytes of SRAM data memory overhead per menu line entry with strings stored in FLASH memory.
- Fixed 43 Bytes of SRAM base cost for the library (of which 12B for the singleton).
- Fixed 1150 Bytes of FLASH base cost for the library's code.
Sketch uses 1086 bytes (3%) of program storage space. Maximum is 32256 bytes.
Global variables use 29 bytes (1%) of dynamic memory, leaving 2019 bytes for local variables. Maximum is 2048 bytes.
void setup() {
Serial.begin(9600);
while (!Serial){};
Serial.print("hello ");
Serial.println("world");
...}
Sketch uses 2120 bytes (6%) of program storage space. Maximum is 32256 bytes.
Global variables use 220 bytes (10%) of dynamic memory, leaving 1828 bytes for local variables. Maximum is 2048 bytes.
Note: We'll leave this extra code in setup(), so as to not bias the cost of using the SerialMenu library. It will be our reference. The intent is to write to the Serial console so this overhead (1034B code, 191B data) is unavoidable unless we rewrite the default HardwareSerial library. We assume the reference program consumes 2120 bytes of FLASH and 220 bytes of SRAM before adding any menus in it. The reference program's console output is:
hello world
#include <SerialMenu.hpp>
SerialMenu& menu = SerialMenu::get();
Sketch uses 2934 bytes (9%) of program storage space. Maximum is 32256 bytes.
Global variables use 232 bytes (11%) of dynamic memory, leaving 1816 bytes for local variables. Maximum is 2048 bytes.
Overhead: 814B code, 12B data If there's no reference to SerialMenu there's no overhead to include the library. If there is, as above, the overhead is from the creation of the SerialMenu singleton instance. It is a one time hit. As coded above, this just prints the library's copyright which is stored in FLASH memory:
SerialMenu - Copyright (c) 2019 Dan Truong
hello world
It is possible to disable printing unecessary text like the copyright with a macro, which further reduces memory consumption. We'll use this mode to report our results:
#define SERIALMENU_MINIMAL_FOOTPRINT true
#include <SerialMenu.hpp>
SerialMenu& menu = SerialMenu::get();
Sketch uses 2782 bytes (8%) of program storage space. Maximum is 32256 bytes.
Global variables use 232 bytes (11%) of dynamic memory, leaving 1816 bytes for local variables. Maximum is 2048 bytes.
Overhead: 662B code, 12B data This result seems reasonable. The singleton holds 2 pointers, a short and a byte (11B total). Now let's add the function calls needed to run the menus. The code does nothing since we still have an empty menu.
#define SERIALMENU_MINIMAL_FOOTPRINT true
#include <SerialMenu.hpp>
SerialMenu& menu = SerialMenu::get();
void setup() {
Serial.begin(9600);
while (!Serial){};
Serial.print("hello ");
Serial.println("world");
...
menu.load(nullptr, 0);
menu.show();
}
void loop() {
menu.run(1);
...}
Sketch uses 3270 bytes (10%) of program storage space. Maximum is 32256 bytes.
Global variables use 263 bytes (12%) of dynamic memory, leaving 1785 bytes for local variables. Maximum is 2048 bytes.
Overhead: 1150B code, 43B data The 3 routines used linked extra code and claimed 32B of SRAM. I don't know where that went.
Since the goal is to use the least SRAM data memory, we'll declare a small menu with two entries, storing the text in FLASH memory via the PROGMEM keyword. Here's the full modified program:
/*
LED bar graph
...
created 4 Sep 2010
by Tom Igoe
...
https://www.arduino.cc/en/Tutorial/BarGraph
*/
#define SERIALMENU_MINIMAL_FOOTPRINT true
#include <SerialMenu.hpp>
// these constants won't change:
const int analogPin = A0;
const int ledCount = 10;
int ledPins[] = {
2, 3, 4, 5, 6, 7, 8, 9, 10, 11
}; // an array of pin numbers to which LEDs are attached
SerialMenu& menu = SerialMenu::get();
const char PROGMEM menu1[] = "A: display one";
const char PROGMEM menu2[] = "B: redisplay the menu";
const SerialMenuEntry mainMenu[] = {
{menu1, true, 'A', [](){ Serial.println("1"); } },
{menu2, true, 'B', [](){ menu.show(); } }
};
constexpr uint8_t mainMenuSize = GET_MENU_SIZE(mainMenu);
void setup() {
Serial.begin(9600);
while (!Serial){};
Serial.print("hello ");
Serial.println("world");
for (int thisLed = 0; thisLed < ledCount; thisLed++) {
pinMode(ledPins[thisLed], OUTPUT);
}
menu.load(mainMenu, mainMenuSize);
menu.show();
}
void loop() {
menu.run(1);
int sensorReading = analogRead(analogPin);
int ledLevel = map(sensorReading, 0, 1023, 0, ledCount);
for (int thisLed = 0; thisLed < ledCount; thisLed++) {
if (thisLed < ledLevel) {
digitalWrite(ledPins[thisLed], HIGH);
}
else {
digitalWrite(ledPins[thisLed], LOW);
}
}
}
Sketch uses 3424 bytes (10%) of program storage space. Maximum is 32256 bytes.
Global variables use 275 bytes (13%) of dynamic memory, leaving 1773 bytes for local variables. Maximum is 2048 bytes.
Overhead: 1304B code, 55B data The results are still coherent. We added two menu entries, each holding a function pointer (not in SRAM), a data pointer and a byte (5B). The menu is now functional, and the output is as follows, when typing A[enter] then B[enter]:
hello world
A: display one
B: redisplay the menu
1
A: display one
B: redisplay the menu
...
Be carefuly with memory constrained boards, running out of SRAM will lead to flaky code behavior. Keep menu text minimal as it could eat up memory. To alleviate memory pressure menus can be stored in Flash program memory using the PROGMEM keyword, instead of SRAM data memory. However, even Flash memory is limited.
Menu callback functions can be declared as separate functions or as lambda
functions directly in the data structure with the menu data. Lambda notation
is best for simple tasks like setting a global variable or calling another
menu, as it keeps the code for a menu entry concise and within the menu
entry definition. See the example.
A lambda function syntax is written "[](){}"
where the code goes inside {}
.
The other elements "[]()"
are not used here.
Copy this package in your Arduino's "library" directory. For example on Mac this will be in "Documents/Arduino/libraries".
To test load and run the example from the Files menu: File -> Examples -> SerialMenu -> Demo Open your Serial console window in the IDE from the Tools menu: Tools -> Serial Monitor
You should see the demo menu, and interact with it.
Let's create a simple menu which controls global values and calls a function to do some math.
#include <SerialMenu.hpp>
const SerialMenu& menu = SerialMenu::get();
float f = 0;
uint16_t x = 0;
uint16_t y = 0;
void doMath(uint16_t a, float b)
{
Serial.println(random(x) * f + y);
}
// Declare the menu and its callback functions
const SerialMenuEntry mainMenu[] = {
{"update X", false, 'x',
[](){ x = menu.getNumber<uint16_t>("Input x:"); } },
{"update F", false, 'f',
[](){ f = menu.getNumber<float>("Input f:"); } },
{"show Y", false, 'y', [](){ Serial.println(y); } },
{"do math =", false, '=', [](){ doMath(x, f); } },
{"show menu", false, 'z', [](){ menu.show(); } }
};
constexpr uint8_t mainMenuSize = GET_MENU_SIZE(mainMenu);
void setup() {
menu.load(mainMenu, mainMenuSize);
menu.show();
}
void loop() {
menu.run(100);
y++;
delay(100);
}
Let's create two menus which call each other, with a varying number of menu entries, some of them stored in Flash (PROGMEM), and some in SRAM.
#include <SerialMenu.hpp>
const SerialMenu& menu = SerialMenu::get();
// Forward declaration of menu2, because it is referenced before definition
extern const SerialMenuEntry menu2[];
extern const uint8_t menu2Size;
// You can declare menu strings separately (a must for PROGMEM FLASH)
const char menu1String1[] = "Y - residplay this menu (Text in SRAM)";
const char menu1String2[] PROGMEM = "Z - second menu (Text in FLASH)";
// Definition of menu1:
// A menu entry is defined with four fields.
// -Text can be embedded directly or you can reference a string name
// -Text in FLASH via PROGMEM is flagged as true, else flagged as false
// -Declare the keypress assigned to a menu entry (converts to lowercase)
// -Declare the callback as a lambda function or use a function pointer
const SerialMenuEntry menu1[] = {
{"X (Text in SRAM)", false, '1', [](){ Serial.println("choice X!"); } },
{menu1String1, false, 'y', [](){ menu.show(); } },
{menu1String2, true, 'z', [](){ menu.load(menu2, menu2Size);
menu.show(); } }
};
constexpr uint8_t menu1Size = GET_MENU_SIZE(menu1);
// Global variables updated by menu2
uint16_t var1, var2;
// Function called by menu2
void foo()
{
var1 = menu.getUint16_t();
Serial.println("Running foo!");
}
// Definition of menu2:
// Notice that:
// -Embedded strings can't be declared PROGMEM so we declare "false"
// -Using 'B' vs 'b' doesn't matter (lowercase auto-conversion)
// -We call the function foo() instead of a lambda function
const SerialMenuEntry menu2[] = {
{"Execute foo()", false, 'e', foo },
{"Set var2", false, 'S', [](){ var2 = menu.getNumber<uint16_t>(); } },
{"Redisplay menu",false, 'r', [](){ menu.show(); } },
{"Back to menu1", false, 'B', [](){ menu.load(menu1, menu1Size);
menu.show(); } }
};
constexpr uint8_t menu2Size = GET_MENU_SIZE(menu2);
// Main arduino code:
void setup() {
// Install menu1 as the current menu to run
menu.load(menu1, menu1Size);
// Display current menu (menu1)
menu.show();
}
void loop() {
// Run the menus:
// Wait for menu user input. Pass-on the main loop delay so menu
// library knows the elapsed time since it was last checked.
menu.run(100);
// Add here your code to do stuff
delay(100);
}
The library by default will maximize functionality and verbosity. It is possible to define macros before the library's inclusion, to disable some features and henceforce reduce the memory footprint.
///////////////////////////////////////////////////////////////////////////////
// If user doesn't specify disabling PROGMEM support, support is on by default.
// To disable set SERIALMENU_DISABLE_PROGMEM_SUPPORT explicitly to true.
// This is safe to do if none of the menu entries are stored in FLASH memory.
///////////////////////////////////////////////////////////////////////////////
#define SERIALMENU_DISABLE_PROGMEM_SUPPORT true
///////////////////////////////////////////////////////////////////////////////
// The menu prints dots every 10s, and blinks the status LED after 10s to show
// the program has not crashed and is still waiting for input.
// To disable set SERIALMENU_DISABLE_HEARTBEAT_ON_IDLE explicitly to true.
///////////////////////////////////////////////////////////////////////////////
#define SERIALMENU_DISABLE_HEARTBEAT_ON_IDLE true
///////////////////////////////////////////////////////////////////////////////
// The library prints some extra text like copyrights etc.
// To disable set SERIALMENU_MINIMAL_FOOTPRINT explicitly to true.
///////////////////////////////////////////////////////////////////////////////
#define SERIALMENU_MINIMAL_FOOTPRINT true
#include <SerialMenu.hpp>