Welcome to the endpointdlp wiki!

• 정보유출방지 (DLP: Data Loss Prevention)와 엔드포인트 정보유출방지(Endpoint DLP)는 어떤 보안 솔루션을 뜻하는지 살펴보면 다음과 같습니다.

1. DLP란?
2. Endpoint DLP란?

• 엔드포인트에서 중요 정보의 유출에 사용될 수 있는 매체를 통제하기 위해서는 다음의 기술을 사용할 수 있습니다.

1. LSM
2. fanotify
3. syscall table 직접 변경
4. kprobe
5. ftrace
6. seccomp

• fanotify 기반의 샘플 코드는 다음과 같습니다

1. 초기화 하는 부분: initialize_fanotify()

   static int initialize_fanotify(int argc, const char **argv)
   {
       int i = 0;
       int fanotify_fd = 0;
       
       if ((fanotify_fd = fanotify_init (FAN_CLOEXEC| FAN_CLASS_CONTENT,
                                         O_RDONLY | O_CLOEXEC | O_LARGEFILE | O_NOATIME)) < 0)
       {
           fprintf (stderr,
                    "Couldn't setup new fanotify device: %s\n",
                    strerror (errno));
           return -1;
       }
       
       n_monitors = 1;
       monitors = (monitored_t*)malloc (n_monitors * sizeof (monitored_t));
   
       {
           monitors[i].path = strdup ( "/media/somansa/1493-193A" );
           
           if (fanotify_mark (fanotify_fd,
                              FAN_MARK_ADD | FAN_MARK_MOUNT,
                              event_mask,
                              AT_FDCWD,
                              monitors[i].path) < 0)
           {
               fprintf (stderr,
                        "Couldn't add monitor in mount '%s': '%s'\n",
                        monitors[i].path,
                        strerror (errno));
               return -1;
           }
           
           printf ("Started monitoring mount '%s'...\n",
                   monitors[i].path);
       }
       return fanotify_fd;
   }
   
   
   
   

2. 실제 파일 이벤트 처리 함수: event_process()

   static void event_process (struct fanotify_event_metadata *event, int fanotify_fd)
   {
       char file_path[PATH_MAX] = {0};
       char program_path[PATH_MAX] = {0};
       
       if (NULL == get_file_path_from_fd (event->fd, file_path, PATH_MAX))
       {
           struct fanotify_response access = {0};
           access.fd = event->fd;
           access.response = FAN_ALLOW;
           write (fanotify_fd, &access, sizeof (access));
           return;
       }
       
       printf ("Received event in path '%s'=>[%d]", file_path, event->mask);
       printf (" pid=%d (%s): \n",
               event->pid,
               (get_program_name_from_pid (event->pid, program_path, PATH_MAX) ?
                program_path :
                "unknown"));
       
       //if (event->mask & FAN_OPEN_PERM)
       {
           struct fanotify_response access = {0};
           
           access.fd = event->fd;
           
           //   if (strstr (file_path, "666") != NULL)
           // {
           //   printf ("\tFAN_OPEN_PERM: denying\n");
           //   access.response = FAN_DENY;
           // }
           //   else
           {
               //printf ("\tFAN_OPEN_PERM: allowing\n");
               access.response = FAN_ALLOW;
           }
           
           write (fanotify_fd, &access, sizeof (access));
       }
       
       fflush (stdout);
       close (event->fd);
   }
   
   
   

3. 앞의 함수들을 호출하는 main 로직 부분: main()

   int main (int argc, const char **argv)
   {
       int signal_fd = 0;
       int fanotify_fd = 0;
       struct pollfd fds[FD_POLL_MAX] = {0};
       
   .... (생략) ....
           
       if ((fanotify_fd = initialize_fanotify (argc, argv)) < 0)
       {
           fprintf (stderr, "Couldn't initialize fanotify\n");
           exit (EXIT_FAILURE);
       }
   
   .... (생략) ....
           
       /* Now loop */
       for (;;)
       {
           /* Block until there is something to be read */
           if (poll (fds, FD_POLL_MAX, -1) < 0)
           {
               fprintf (stderr,
                        "Couldn't poll(): '%s'\n",
                        strerror (errno));
               exit (EXIT_FAILURE);
           }
           
   .... (생략) ....
               
           /* fanotify event received? */
           if (fds[FD_POLL_FANOTIFY].revents & POLLIN)
           {
               char buffer[FANOTIFY_BUFFER_SIZE];
               ssize_t length;
               
               if ((length = read (fds[FD_POLL_FANOTIFY].fd,
                                   buffer,
                                   FANOTIFY_BUFFER_SIZE)) > 0)
               {
                   struct fanotify_event_metadata *metadata;
                   
                   metadata = (struct fanotify_event_metadata *)buffer;
                   while (FAN_EVENT_OK (metadata, length))
                   {
                       event_process (metadata, fanotify_fd);
                       if (metadata->fd > 0)
                           close (metadata->fd);
                       metadata = FAN_EVENT_NEXT (metadata, length);
                   }
               }
           }
       }
       
   .... (생략) ....
           
       printf ("Exiting fanotify example...\n");
       
       return EXIT_SUCCESS;
   }
   
   

• 전체 소스는 여기를 참고해 주세요

https://github.com/somansa-oss/endpointdlp/blob/master/examples/filesystem_monitoring/fs_monitor.c