Yet Another Yogurt - An AUR Helper Written in Go

There's a point in everyone's life when you feel the need to write an AUR helper because there are only about 20 of them. So say hi to 20+1.

Yay is based on the design of yaourt, apacman and pacaur. It is developed with these objectives in mind:

• Provide an interface for pacman
• Yaourt-style interactive search/install
• Minimal dependencies
• Minimize user input
• Know when git packages are due for upgrades

• Perform advanced dependency solving
• Download PKGBUILDs from ABS or AUR
• Tab-complete the AUR
• Query user up-front for all input (prior to starting builds)
• Narrow search terms (yay linux header will first search linux and then narrow on header)
• Find matching package providers during search and allow selection
• Remove make dependencies at the end of the build process
• Run without sourcing PKGBUILD

If you are migrating from another AUR helper, you can simply install Yay with that helper.

Alternatively, the initial installation of Yay can be done by cloning the PKGBUILD and building with makepkg:

git clone https://aur.archlinux.org/yay.git
cd yay
makepkg -si

All support related to Yay should be requested via GitHub issues. Since Yay is not officially supported by Arch Linux, support should not be sought out on the forums, AUR comments or other official channels.

A broken AUR package should be reported as a comment on the package's AUR page. A package may only be considered broken if it fails to build with makepkg. Reports should be made using makepkg and include the full output as well as any other relevant information. Never make reports using Yay or any other external tools.

Contributors are always welcome!

If you plan to make any large changes or changes that may not be 100% agreed on, we suggest opening an issue detailing your ideas first.

Otherwise send us a pull request and we will be happy to review it.

Yay depends on:

• go (make only)
• git
• base-devel

Note: Yay also depends on a few other projects (as vendored dependencies). These projects are stored in vendor/, are built into yay at build time, and do not need to be installed separately. These files are managed by dep and should not be modified manually.

Following are the dependencies managed under dep:

• https://github.com/Jguer/go-alpm
• https://github.com/Morganamilo/go-srcinfo
• https://github.com/mikkeloscar/aur

Run make to build Yay. This command will generate a binary called yay in the same directory as the Makefile.

Note: Yay's Makefile automatically sets the GOPATH to $PWD/.go. This path will ensure dependencies in vendor/ are built. Running manual go commands such as go build will require that you either set the GOPATH manually or go get the vendored dependencies into your own GOPATH.

All code should be formatted through go fmt. This tool will automatically format code for you. We recommend, however, that you write code in the proper style and use go fmt only to catch mistakes.

Run make test to test Yay. This command will verify that the code is formatted correctly, run the code through go vet, and run unit tests.

Make sure you have the Color option in your /etc/pacman.conf (see issue #123).

The default behavior was changed after v8.918 (see 3bdb534 and issue #554). To restore the package-skip behavior use --combinedupgrade (make it permanent by appending --save). Note: skipping packages will leave your system in a partially-upgraded state.

Yay uses git diff to display diffs, which by default tells less not to page if the output can fit into one terminal length. This behavior can be overridden by exporting your own flags (export LESS=SRX).

yay --editmenu --nodiffmenu --save

yay -{OPERATION} --aur yay -{OPERATION} --repo

This message does not mean that updated AUR packages are available. It means the packages have been flagged out of date on the AUR, but their maintainers have not yet updated the PKGBUILDs (see outdated AUR packages).

Yay resolves all dependencies ahead of time. You are free to edit the PKGBUILD in any way, but any problems you cause are your own and should not be reported unless they can be reproduced with the original PKGBUILD.

yay <Search Term>
        Present package-installation selection menu.

yay -Ps
        Print system statistics.

yay -Yc
        Clean unneeded dependencies.

yay -G <AUR Package>
        Download PKGBUILD from ABS or AUR.

yay -Y --gendb
        Generate development package database used for devel update.

yay -Syu --devel --timeupdate
        Perform system upgrade, but also check for development package updates and use
        PKGBUILD modification time (not version number) to determine update.