cd /usr/src
git clone https://github.com/sipcapture/sipgrep.git

cd sipgrep
./build.sh
./configure
make && make install

./sipgrep  -V

sipgrep: V2.00, $Revision: 2.00 $

./sipgrep -h

usage: sipgrep <-ahNViwgGJpevxlDTRMmqCJj> <-IO pcap_dump> <-n num> <-d dev> <-A num>
             <-s snaplen> <-S limitlen> <-c contact user> <-j user agent>
	     <-f from user>  <-t to user> <-H capture url> <-q seconds>
             <-P portrange> <-F file> <match expression> <bpf filter>
   -h  is help/usage
   -V  is version information
   -e  is show empty packets
   -i  is ignore case
   -v  is invert match
   -R  is don't do privilege revocation logic
   -w  is word-regex (expression must match as a word)
   -p  is don't go into promiscuous mode
   -l  is make stdout line buffered
   -D  is replay pcap_dumps with their recorded time intervals
   -T  is print delta timestamp every time a packet is matched
   -m  is don't do dialog match
   -M  is don't do multi-line match (do single-line match instead)
   -I  is read packet stream from pcap format file pcap_dump
   -O  is dump matched packets in pcap format to pcap_dump
   -n  is look at only num packets
   -A  is dump num packets after a match
   -s  is set the bpf caplen
   -S  is set the limitlen on matched packets
   -C  is no colors in stdout
   -c  is search user in Contact: header
   -f  is search user in From: header
   -t  is search user in To: header
   -F  is read the bpf filter from the specified file
   -H  is homer sipcapture URL (i.e. udp:10.0.0.1:9061)
   -N  is show sub protocol number
   -g  is disabled clean up dialogs during trace
   -G  is print dialog report during clean up
   -J  is kill friendly scanner automatically
   -j  is kill friendly scanner automatically matching user agent string
   -q  is close sipgrep after some time
   -a  is enable reasembling
   -P  is use specified portrange instead of default 5060-5061
   -d  is use specified device instead of the pcap default

#Find a dialog there From user contains '2323232'
sipgrep -f 2323232

#Find a dialog there To user contains '1111' and print dialog report
sipgrep -f 1111 -G

#Display only 603 replies without dialog match
sipgrep '^SIP/2.0 603' -m

#Display only OPTIONS and NOTIFY requests
sipgrep '^(OPTIONS|NOTIFY)'

#Display only SUBSCRIBE dialog
sipgrep 'CSeq:\s?\d* (SUBSCRIBE|PUBLISH|NOTIFY)' -M

#Kill friendly-scanner
sipgrep -J

#Kill friendly-scanner with custom UAC
sipgrep -j sipvicious

#Display dialogs and duplicate all traffic to HOMER sipcapture in HEPv3
sipgrep -f 23333 -H udp:10.0.0.1:9061

#collect all Calls/Regisrations dialogs during 120 seconds, print reports and exit.
sipgrep -g -G -q 120

-----------------------------------------------
Dialog finished: [53342c3b200e-hgf9cyc7r0i2]
Type: Call
From: "From Work with Love" <sip:[email protected]>;tag=fucueumi19
To: <sip:[email protected];user=phone>
UAC: snom360/8.7.3.25
CDR init ts: 1395928127
CDR ringing ts: 1395928128
SRD(PDD): 1 sec
CDR answer ts: 1395928136
WTA: 9 sec
CDT (duration): 70 sec
CDR termination ts: 1395928206
Was connected: YES
REASON: BYE
-----------------------------------------------

-----------------------------------------------
Dialog finished: [[email protected]]
Type: Registration
From: <sip:[email protected]>;tag=3598882807
To: <sip:[email protected]>
UAC: AVM FRITZ!Box Fon WLAN 7170 Annex A 58.04.67 (Dec 18 2008)
CDR init ts: 1395928251
CDR termination ts: 1395928251
SDT: 0 sec
Was registered: YES
REASON: 200
-----------------------------------------------

-----------------------------------------------
Dialog finished: [2d714880c68a824dae62049eecc91599]
Type: Call
From: 7001<sip:7001@xxxxxxx>;tag=1244ddd6
To: 448455915802<sip:448455915802@xxxxxxx>
UAC: sipcli/v1.8
CDR init ts: 1395928246
SDT: 8 sec
CDR termination ts: 1395928254
Was connected: NO
REASON: 407
-----------------------------------------------