Localreg is a collection of kernel-based statistical methods:
- Smoothing of noisy data series through multivariate local polynomial regression (including LOESS/LOWESS).
- Multivariate and complex-valued radial basis function (RBF) regression.
Install from PyPI using pip
(preferred method):
pip install localreg
Or download the GitHub repository https://github.com/sigvaldm/localreg.git and run:
python setup.py install
Local polynomial regression is performed using the function:
localreg(x, y, x0=None, degree=2, kernel=rbf.epanechnikov, radius=1, frac=None)
where x
and y
are the x and y-values of the data to smooth, respectively.
x0
is the x-values at which to compute smoothed values. By default this is the same as x
, but beware that the run time is proportional to the size of x0
, so if you have many datapoints, it may be worthwhile to specify a smaller x0
yourself.
Local polynomial regression works by fitting a polynomial of degree degree
to the datapoints in vicinity of where you wish to compute a smoothed value (x0
), and then evaluating that polynomial at x0
. For degree=0
it reduces to a weighted moving average. A weighting function or kernel kernel
is used to assign a higher weight to datapoints near x0
. The argument to kernel
is a pure function of one argument so it is possible to define custom kernels. The following kernels are already implemented:
rectangular
triangular
epanechnikov
biweight
triweight
tricube
cosine
gaussian
(non-compact)logistic
(non-compact)sigmoid
(non-compact)silverman
(non-compact)
Having a kernel wich tapers off toward the edges, i.e., not a rectangular kernel, results in a smooth output.
The radius of the kernel can be scaled by the parameter radius
, which in 1D is half of the kernel-width for kernels with compact support. For kernels with non-compact support, like the Gaussian kernel, it is simply a scaling parameter, akin to the standard deviation. Having a wider kernel and including more datapoints lowers the noise (variance) but increases the bias as the regression will not be able to capture variations on a scale much narrower than the kernel window.
For unevenly spaced datapoints, having a fixed radius means that a variable number of datapoints are included in the window, and hence the noise/variance is variable too. However, the bias is fixed. Using a radius that varies such that a fixed number of datapoints is included leads instead to constant noise/variance but fixed bias. This can be acheived by specifying frac
which overrules radius
and specifies the fraction of all datapoints to be included in the radius of the kernel.
The below example exhibits several interesting features:
import numpy as np import matplotlib.pyplot as plt from localreg import * np.random.seed(1234) x = np.linspace(1.5, 5, 2000) yf = np.sin(x*x) y = yf + 0.5*np.random.randn(*x.shape) y0 = localreg(x, y, degree=0, kernel=rbf.tricube, radius=0.3) y1 = localreg(x, y, degree=1, kernel=rbf.tricube, radius=0.3) y2 = localreg(x, y, degree=2, kernel=rbf.tricube, radius=0.3) plt.plot(x, y, '+', markersize=0.6, color='gray') plt.plot(x, yf, label='Ground truth ($\sin(x^2)$)') plt.plot(x, y0, label='Moving average') plt.plot(x, y1, label='Local linear regression') plt.plot(x, y2, label='Local quadratic regression') plt.legend() plt.show()
If there's a slope in the data near an edge, a simple moving average will fail to take into account the slope, as seen in the figure, since most of the datapoints will be to the right (or left) of x0
. A local linear (or higher order regression) is able to compensate for this. We also see that as the frequency of the oscillations increases, the local linear regression is not able to keep up, because the variations become too small compared to the window. A smaller window would help, at the cost of more noise in the regression. Another option is to increase the degree to 2. The quadratic regression is better at following the valleys and the hills. For too rapid changes compared to the kernel, however, quadratic polynomials will also start failing.
It is also worth noting that a higher degree also comes with an increase in variance, which can show up as small spurious oscillations. It is therefore not very common to go higher than 2, although localreg supports arbitrary degree.
For multivariate input, the coordinates of data point i
are given by x[i,:]
. This example has 2 inputs:
from localreg import * import matplotlib.pyplot as plt from mpl_toolkits.mplot3d import Axes3D # Axes3D import has side effects, it enables using projection='3d' in add_subplot import numpy as np N = 500 degree=1 x = np.random.rand(N,2) y = np.cos(2*np.pi*x[:,0])*(1-x[:,1]) fig = plt.figure() ax = fig.add_subplot(111, projection='3d') m = np.arange(0, 1.05, 0.05) X, Y = np.meshgrid(m,m) x0 = np.array([np.ravel(X), np.ravel(Y)]).T z0 = localreg(x, y, x0, degree=degree, radius=0.2) Z = z0.reshape(X.shape) ax.plot_wireframe(X, Y, Z, rcount=10, ccount=10, color='green') ax.plot3D(x[:,0], x[:,1], y, '.') ax.set_xlabel('X') ax.set_ylabel('Y') ax.set_zlabel('Z') plt.show()
[Hastie] |
|
[Cleveland] |
|
localreg()
uses the function polyfit()
internally to evaluate polynomial fits locally. It is also possible to use polyfit()
directly, should a standard (non-local) polynomial fit be desired instead:
from localreg import * import matplotlib.pyplot as plt from mpl_toolkits.mplot3d import Axes3D # Axes3D import has side effects, it enables using projection='3d' in add_subplot import numpy as np N = 50 degree=2 x = np.random.rand(N,2) y = x[:,0]*x[:,1] + 0.02*np.random.randn(N) fig = plt.figure() ax = fig.add_subplot(111, projection='3d') m = np.arange(0, 1.05, 0.05) X, Y = np.meshgrid(m,m) x0 = np.array([np.ravel(X), np.ravel(Y)]).T z0 = polyfit(x, y, x0, degree=degree) Z = z0.reshape(X.shape) ax.plot_wireframe(X, Y, Z, rcount=10, ccount=10, color='green') ax.plot3D(x[:,0], x[:,1], y, 'o') ax.set_xlabel('X') ax.set_ylabel('Y') ax.set_zlabel('Z') plt.show()
An RBF network is a simple machine learning network suitable for mesh-free regression in multiple dimensions. It is robust, easy to understand, and although it is not a universal method, it works well for some problems.
A radial basis function is a function g(t)
, possibly with a multidimensional domain, but which only depends on the radial distance t
of the input with respect to the origin of the RBF. An RBF network is then a weighted sum of such functions, with displaced centers:
y_i = sum_j w_j g(||x_j-c_j||/r)
This sum is fitted to a set of data points (x,y)
. Typically, the RBF is a Gaussian function, although any it can be any function of one argument (the radial distance), for instance any of the kernals listed above. In RBFnet
, the centers c_j
are first determined to get a good coverage of the domain by means of K-means clustering. The radius r
, here taken to be the same for all terms, is a hyperparameter to be tuned. With this, linear least squares is used to fit the weights w_j
. Both the input and output can be complex-valued.
This example demonstrates how 10 radial basis functions can be used to fit a sine curve:
from localreg import RBFnet import numpy as np import matplotlib.pyplot as plt x = np.linspace(0,1,100) y = np.sin(2*np.pi*x) net = RBFnet() net.train(x, y, num=10, radius=0.3) plt.plot(x, y, label='Ground truth') net.plot_bases(plt.gca(), x, label='Prediction') plt.legend() plt.show()
The dashed lines plotted using the plot_bases
method are the individual terms in the weighted sum after training. The learning capacity of an RBF network is primarily determined by the number of basis functions, decided by the num
parameter. In this case 10 basis functions makes for a good fit, but data with larger variability and more dimensions may require more basis functions. Other parameters that can be adjusted is the radius of the basis functions, as well as the analytical expression of the radial basis function itself. The radius is in terms of standard deviations of the input points, and is therefore always a number of order of magnitude one. By default Gaussian basis functions are used, but any of the kernels mentioned for local polynomial regression can be specified using the rbf
parameter, as well as custom functions of one argument. Normalization can be turned off using the normalize
argument. In this case the radius has similar magnitude as the input.
This example demonstrates multi-dimensional inputs. Due to the larger variability more basis functions are needed than in example 1. We also do not specify the radius in this case, but allow RBFnet
to use an internal algorithm for choosing the radius that minimizes the RMS error (other error measures may be specified using the measure
parameter). While automatically tuning the radius works well in this example, it must be considered an experimental feature. It is also more time-consuming:
from localreg import RBFnet, plot_corr import numpy as np import matplotlib.pyplot as plt from mpl_toolkits.mplot3d import Axes3D # Enables 3d-projection x = np.linspace(0,2,30) X, Y = np.meshgrid(x, x) input = np.array([X.ravel(), Y.ravel()]).T x, y = input.T z = y*np.sin(2*np.pi*x) net = RBFnet() net.train(input, z, num=50) z_hat = net.predict(input) fig = plt.figure() ax = fig.add_subplot(111, projection='3d') ax.plot_wireframe(X, Y, z.reshape(X.shape), rcount=20, ccount=20) ax.plot_surface(X, Y, z_hat.reshape(X.shape), alpha=0.5, color='green') plt.show() fig, ax = plt.subplots() plot_corr(ax, z, z_hat) plt.show()
The figures show excellent agreement between the true and predicted data. In the first plot the wirefram is the true data, whereas the surface is the predicted data. The function plot_corr
is handy to visualize the agreement between true and predicted data.
When using multi-dimensional data normalization becomes more important. If the input variables have different standard deviation, e.g., if they are variables of entirely different physical dimensions, it will be difficult to adapt the network with few basis functions of radial shape, because it will be difficult to resolve the details in the "small" axes while spanning the data in the "large" axes. Normalization make the spread along the axes more comparable.
Localreg comes with several error metrics for quantifying the error:
rms_error
rms_rel_error
max_abs_error
max_rel_error
mean_abs_error
mean_rel_error
error_bias
rel_error_bias
error_std
rel_error_std
This example demonstates a couple of these, as well as a special modification to the least squares algorithm available in RBFnet
:
from localreg import RBFnet from localreg.metrics import rms_error, rms_rel_error from frmt import print_table import matplotlib.pyplot as plt import numpy as np x = np.linspace(0,0.49,100) y = np.tan(np.pi*x)+1 net = RBFnet() net.train(x, y, radius=1) y_hat0 = net.predict(x) net.train(x, y, radius=1, relative=True) y_hat1 = net.predict(x) print_table( [['' , 'RMSE' , 'RMSRE' ], ['Normal LLS' , rms_error(y, y_hat0), rms_rel_error(y , y_hat0)], ['Relative LLS', rms_error(y, y_hat1), rms_rel_error(y , y_hat1)]] ) plt.figure() plt.plot(x, y, label='Ground truth') plt.plot(x, y_hat0, label='Normal LLS') plt.plot(x, y_hat1, label='Relative LLS') plt.legend() plt.show()
Output:
RMSE RMSRE Normal LLS 0.65 0.17 Relative LLS 1.14 0.0457
This example fits the data to a tan-function, which becomes very large towards the right edge. Linear least squares (LLS) algorithms solves the so-called normal equations, which is equivalent to minimizing the squared sum of residuals or the root-mean-square (RMS) of the error. When the data spans a large range, the error can quickly become very large for the smaller values, because the algorithm optimizes the errors in absolute terms. In this example, the linear least squares algorithm makes a poor (and oscialltory) prediction of smaller values, because the absolute error in the larger values are made smaller that way. However, when working on data spanning several orders of magnitude, the relative error is often more important. By training with relative=True
, the normal equations are preconditioned such that the root-mean-square of the relative errors (RMSE) are minimized instead of RMSE.
Both the input and the output may be multidimensional. In this example, the input is univariate, but the output multivariate.
Output:
from localreg import RBFnet import numpy as np import matplotlib.pyplot as plt x = np.linspace(0,1,100) y = np.zeros((len(x), 2)) y[:,0] = np.sin(2*np.pi*x) y[:,1] = np.cos(2*np.pi*x) net = RBFnet() net.train(x, y) yhat = net.predict(x) plt.plot(x, y[:,0], 'C0', label='Ground truth') plt.plot(x, y[:,1], 'C1', label='Ground truth') plt.plot(x, yhat[:,0], ':k', label='Prediction') plt.plot(x, yhat[:,1], ':k', label='Prediction') plt.legend() plt.show()
It is also possible to use RBFnet on matrix- or tensor-valued input and output, although this requires the user to reshape the input and output. A matrix or a tensor input is nothing more than a multivariate input, with the inputs arranged in a particular shape. Thus, to use RBFnet, use Numpy's reshape method to make it conforming to RBFnet. The output can likewise be reshaped prior to training, and be shaped back to a matrix or tensor after prediction.