Turn your Android phone into real Amateur Radio HF/VHF/UHF APRS enabled Codec2/OPUS DV (digital voice) and/or FreeDV handheld transceiver.

Requires additional hardware (e.g. AFSK/LoRa), software (e.g. Direwolf) radio modem or analog transceiver with USB audio + VOX/USB CAT PTT control, such as MCHF or ICOM

For more information about FreeDV and Codec2 visit https://github.com/drowe67/codec2

For more information about OPUS codec visit https://opus-codec.org/

For detailed information about project Wiki

What you can do with this app:

• Voice communication:
  • Send and receive Codec2 voice over FreeDV modes
  • Send and receive Codec2/OPUS voice over KISS
  • Send and receive Codec2/OPUS voice encapsulated into APRS UI frames
• Data communication
  • Use APRS over FSK 300 (HF, TX only), AFSK1200 (VHF), FreeDV OFDM (HF) or APRS-IS (Internet)
  • Send and receive APRS position reports
  • Send and receive APRS messages
  • APRS log with raw APRS data
  • APRS station hub with stations grouped by callsign and their log
  • APRS map with ability to see station info, station track with information about each geo position
  • Use application as APRS digirepeater
  • Use application as APRS-IS RX/TX iGate to forward packets to/from APRS-IS (Internet)
  • Use application as APRS-IS internet tracker to send/receive APRS data over Internet
  • Send and receive text packets in lora-aprs format over KISS
• Integrate with hardware/software
  • Use it with your KISS Bluetooth/BLE/USB/TCPIP hardware modem, such as LoRa/FSK/AFSK/etc, control its parameters by using "set hardware" KISS command
  • Use it with KISS software modem using TCPIP, such as Direwolf
  • Use it with your HF/VHF/UHF transceiver as a sound modem
  • Use your phone as a software sound modem by using external USB OTG audio adapter (voice + data) or built-in phone speaker and mic (only data)
  • Use your phone for FreeDV protocol voice communication together with HF transceiver, which supports USB OTG audio
  • Control your external transceiver PTT by using USB serial CAT (or VOX if CAT PTT is not supported)

• Android 7.0 (API 24) or higher
  • Application could also be used with your Android network radio, such as Inrico TM-7, apk just needs to be installed over USB, see Discussion
• Modem, radio module or transceiver which supports KISS protocol or can process KISS or raw Codec2 audio frames over serial Bluetooth, BLE, USB or TCP/IP
• Analog transceiver with built-in or external USB audio adapter and VOX or USB CAT PTT control (such as MCHF or iCom IC-7x00 series)

• Source code is integrated into this project for easier building and customization:
  • Codec2 codec: https://github.com/drowe67/codec2
  • Android Codec2 wrapper code: https://github.com/UstadMobile/Codec2-Android
  • OPUS codec: https://opus-codec.org
• Fetched with gradle as dependency:
  • Android USB serial: https://github.com/mik3y/usb-serial-for-android

• Building from command line:
  ANDROID_HOME=<android dir> JAVA_HOME=<java home dir> ./gradlew <command>
  For example:

  # ANDROID_HOME=~/Android/Sdk JAVA_HOME=~/.jdks/jbr-21.0.4 ./gradlew assembleRelease
  
  Welcome to Gradle 7.0.2!
  
  ... compilation output ...
  
  > Task :codec2talkie:lintVitalRelease
  No issues found.
  
  BUILD SUCCESSFUL in 2m 2s
  111 actionable tasks: 40 executed, 71 up-to-date
  

• Hardware
  • ESP32 LoRa APRS modem (used with this application for testing): https://github.com/sh123/esp32_loraprs
  • ESP32 LoRa DV transceiver: https://github.com/sh123/esp32_loradv
  • Arduno Micro KISS modem and APRS AX.25 digirepeater: https://github.com/sh123/micro_loraprs
  • ESP32 Arduino Codec2 library (ESP32 i2s walkie talkie example interoperable with this application): https://github.com/sh123/esp32_codec2_arduino
  • Minimal Arduino LoRa KISS modem: https://github.com/sh123/lora_arduino_kiss_modem
  • Minimal Arduino NRF24 KISS modem: https://github.com/sh123/nrf24l01_arduino_kiss_modem
• Software:
  • FreeDV TNC: https://github.com/xssfox/freedv-tnc
  • FreeDV data modem UI: https://github.com/DJ2LS/FreeDATA
  • FreeDV official UI: https://github.com/drowe67/freedv-gui
  • Version adopted for M17 protocol usage: https://github.com/mobilinkd/m17-kiss-ht
  • Codec2 iOS wrapper: https://github.com/Beartooth/codec2-ios
• Other interesting projects:
  • LoRa mesh text GPS communicator: https://github.com/meshtastic/Meshtastic-device

• ESP32 LoRa Bluetooth headless APRS modem (no screen and external controls): https://github.com/sh123/esp32_loraprs
• ESP32 LoRa DV handheld transceiver (with screen and controls): https://github.com/sh123/esp32_loradv
• Arduno Micro USB KISS modem (no screen and external controls): https://github.com/sh123/micro_loraprs