-
Notifications
You must be signed in to change notification settings - Fork 2
p0f 2.0.8
License
seo01/p0f
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
Folders and files
Name | Name | Last commit message | Last commit date | |
---|---|---|---|---|
 |  | |||
 |  | |||
 |  | |||
 |  | |||
 |  | |||
 |  | |||
 |  | |||
 |  | |||
 |  | |||
 |  | |||
 |  | |||
 |  | |||
 |  | |||
 |  | |||
 |  | |||
 |  | |||
 |  | |||
 |  | |||
 |  | |||
 |  | |||
 |  | |||
 |  | |||
 |  | |||
 |  | |||
 |  | |||
 |  | |||
 |  | |||
Repository files navigation
--=-- p0f 2 --=-- "Dr. Jekyll had something to Hyde" passive OS fingerprinting tool version 2.0.8 (C) Copyright 2000 - 2006 by Michal Zalewski <[email protected]> Various ports (C) Copyright 2003 - 2006 by: Michael A. Davis <[email protected]> Kirby Kuehl <[email protected]> Kevin Currie <[email protected]> Portions contributed by numerous good people - see CREDITS file. https://lcamtuf.coredump.cx/p0f.shtml For a book on some interesting passive fingerprinting tips, see: https://lcamtuf.coredump.cx/silence ********************************************************************* **** HELP WITH P0F DATABASE: https://lcamtuf.coredump.cx/p0f-help **** ********************************************************************* ----------- 0. Contents ----------- This document describes the concept and history of p0f, its command-line options and extensions, and goes into some detail about its operation, integration with existing solutions, and so on. Table of contents: 1) What's this, anyway? 2) Why would I want to use it? 3) What's new then? 4) Command-line 5) Active service integration 6) SQL database integration 7) Masquerade detection 8) Fingerprinting accuracy and precision 9) Adding signatures 10) Security 11) Limitations 12) Is it better than other software? 13) Program no work! 14) Appendix A: Links to OS fingerprinting resources ----------------------- 1. What's this, anyway? ----------------------- The passive OS fingerprinting technique is based on analyzing the information sent by a remote host while performing usual communication tasks - such as whenever a remote party visits your webpage, connects to your MTA - or whenever you connect to a remote system while browsing the web or performing other routine tasks. In contrast to active fingerprinting (with tools such as NMAP or Queso), the process of passive fingerprinting does not generate any additional or unusual traffic, and thus cannot be detected. Captured packets contain enough information to identify the remote OS, thanks to subtle differences between TCP/IP stacks, and sometimes certain implementation flaws that, although harmless, make certain systems quite unique. Some additional metrics can be used to gather information about the configuration of a remote system or even its ISP and network setup. The name of the fingerprinting technique might be somewhat misleading - although the act of discovery is indeed passive, p0f can be used for active testing. It is just that you are not required to send any unusual or undesirable traffic, and can rely what you would be getting from the remote party anyway, in the course of everyday, seemingly innocuous chatter. To accomplish the job, p0f equips you with four different detection modes: - Incoming connection fingerprinting (SYN mode, default) - whenever you want to know what the guy or gal who connects to you runs, - Outgoing connection (remote party) fingerprinting (SYN+ACK mode) - to fingerprint systems you or your users connect to, - Outgoing connection refused (remote party) fingerprinting (RST+ mode) - to fingerprint systems that reject your traffic, - Established connection fingerprinting (stray ACK mode) - to examine existing sessions without any needless interference. It is quite difficult to pinpoint who came up with this idea of passive SYN-based OS fingerprinting, though due credit must be given to Craig Smith, Peter Grundl, Lance Spitzner, Shok, Johan, Su1d, Savage, Fyodor and other brave hackers who explored this and related topics in the years 1999 and 2000. P0f was the first (and I believe remains the best) fully-fledged implementation of a set of TCP-related passive fingerprinting techniques. The current version uses a number of detailed metrics, often invented specifically for p0f, and achieves a very high level of accuracy and detail; it is designed for hands-free operation over an extended period of time, and has a number of features to make it easy to integrate it with other solutions. Portions of this code are used in several IDS systems, some sniffer software; p0f is also shipped with several operating systems and incorporated into an interesting OpenBSD pf hack by Mike Frantzen, that allows you to filter out or redirect traffic based on the source OS. There is also a beta patch for Linux netfilter, courtesy of Evgeniy Polyakov. In short, p0f is a rather well-established software at this point. ------------------------------ 2. Why would I want to use it? ------------------------------ Oh, a number of uses come to mind: - Profiling / espionage - ran on a server, firewall, proxy or router, p0f can be used to silently gather statistical and profiling information about your visitors, users, or competitors. P0f also gathers netlink and distance information suitable for determining remote network topology, which may serve as a great piece of pre-attack intelligence. - Active response / policy enforcement - integrated with your server or firewall, p0f can be used to handle specific OSes in the most suitable manner and serve most appropriate content; you may also enforce a specific corporate OS policy, restrict SMTP connections to a set of systems, etc; with masquerade detection capabilities, p0f can be used to detect illegal network hook-ups and TOS violations. - PEN-TEST - in the SYN+ACK, RST+, or stray ACK mode, or when a returning connection can be triggered on a remote system (HTML-enabled mail with images, ftp data connection, mail bounce, identd connection, IRC DCC connection, etc), p0f is an invaluable tool for silent probing of a subject of such a test. Masquerade detection in SYN+ACK or RST+ modes can be also used to test for load balancers and so forth. - Network troubleshooting - RST+ mode can be used to debug network connectivity problems you or your visitors encounter. - Bypassing a firewall - p0f can "see thru" most NAT devices, packet firewalls, etc. In SYN+ACK mode, it can be used for fingerprinting over a connection allowed by the firewall, even if other types of packets are dropped; as such, p0f is the solution when NMAP and other active tools fail. - Amusement value is also pretty important. Want to know what this guy runs? Does he have a DSL, X.25 WAN hookup, or a shoddy SLIP connection? What's Google crawlbot's uptime? Of course, "a successful [software] tool is one that was used to do something undreamed of by its author" ;-) ------------------- 3. What's new then? ------------------- The original version of p0f was written somewhere in 2000 by Michal Zalewski (that be me), and later taken over William Stearns (circa 2001). The original author still contributed to the code from time to time, and the version you're holding right now is his sole fault - although I'd like William to take over further maintenance, if he's interested. Version 2 is a complete rewrite of the original v1 code. The main reason for this is to make signatures more flexible, and to implement certain additional checks for very subtle packet characteristics to improve fingerprint accuracy. Changes include: NEW CORE CHECKS: - Option layout and count check, - EOL presence and trailing option data [*], - Unrecognized option handling (TTCP, etc), - WSS to MSS/MTU correlation checks [*], - Zero timestamp check, - Non-zero ACK in initial SYN [*], - Non-zero "unused" TCP fields [*], - Non-zero urgent pointer in SYN [*], - Non-zero second timestamp [*], - Zero IP ID in initial packet, - Unusual auxiliary flags, - Data payload in control packets [*], - SEQ number equal to ACK number [*], - Zero SEQ number [*], - Non-empty IP options. [*] denotes metrics "invented" for p0f, as far as I am concerned. Other metrics were discussed by certain researchers before, although usually not implemented anywhere. A detailed discussion of all checks performed by p0f can be found in the introductory comments in p0f.fp, p0fa.fp and p0fr.fp. As a matter of fact, some of the metrics were so precise I managed to find several previously unknown TCP/IP stack bugs :-) See doc/win-memleak.txt and p0fr.fp for more information. ENGINE IMPROVEMENTS: - Major performance boost - no more runtime signature parsing, added BPF pre-filtering, signature hash lookups. All this to make p0f suitable for being run on high-throughput devices, - Advanced masquerade detection for policy enforcement (ISPs, corporate networks), - Modulo and wildcard operators for certain TCP/IP parameters to make it easier to come up with generic last chance signatures for systems that tweak settings notoriously (think Windows), - Auto-detection of DF-zeroing firewalls, - Auto-detection of MSS-tweaking NAT and router devices, - Media type detection based on MSS, with a database of common link types, - Origin network detection based on unusual ToS / precedence bits, - Ability to detect and skip ECN option when examining flags, - Better fingerprint file structure and contents - all fingerprints are rigorously reviewed before being added. - Generic last-chance signatures to cover general OS characteristics, - Query mode to enable easy integration with third party software - p0f caches recent fingerprints and answer queries for src-dst combinations on a local stream socket in a easy to parse form, - Usability features: greppable output option, daemon mode, host name resolution option, promiscuous mode switch, built-in signature collision detector, ToS reporting, full packet dumps, pcap dump output, etc, - Brand new SYN+ACK, RST+ and stray ACK fingerprinting modes for silent identifications of systems you connect to the usual way (web browser, MTA), or even systems you cannot connect to at all; now also with RST+ACK flag and value validator. - Fixed WSCALE handling in general, and WSS passing on little-endian, many other bug-fixes and improvements of the packet parser (including some sanity checks). - Fuzzy checks option when no precise matches are found (limited). - VLAN support. Sadly, this will break all compatibility with v1 signatures, but it's well worth it. --------------- 4. Command-line --------------- P0f is rather easy to use. There's a number of options, but you don't need to know most of them for normal operation: p0f [ -f file ] [ -i device ] [ -s file ] [ -o file ] [ -Q socket [ -0 ] ] [ -w file ] [ -u user ] [ -c size ] [ -T nn ] [ -e nn ] [ -FNODVUKAXMqxtpdlRL ] [ 'filter rule' ] -f file - read fingerprints from file; by default, p0f reads signatures from ./p0f.fp or /etc/p0f/p0f.fp (the latter on Unix systems only). You can use this to load custom fingerprint data. Specifying multiple -f values will NOT combine several signature files together. -i device - listen on this device; p0f defaults to whatever device libpcap considers to be the best (and which often isn't). On some newer systems you might be able to specify 'any' to listen on all devices, but don't rely on this. Specifying multiple -i values will NOT cause p0f to listen on several interfaces at once. -s file - read packets from tcpdump snapshot; this is an alternate mode of operation, in which p0f reads packet from pcap data capture file, instead of a live network. Useful for forensics (this will parse tcpdump -w output, for example). You can use Ethereal's text2pcap to convert human-readable packet traces to pcap files, if needed. -w file - writes matching packets to a tcpdump snapshot, in addition to fingerprinting; useful when it is advisable to save copies of the actual traffic for review. -o file - write to this logfile. This option is required for -d and implies -t. -Q socket - listen on a specified local stream socket (a filesystem object, for example /var/run/p0f-sock) for queries. One can later send a packet to this socket with p0f_query structure from p0f-query.h, and wait for p0f_response. This is a method of integrating p0f with active services (web server or web scripts, etc). P0f will still continue to report signatures the usual way - but you can use -qKU combination to suppress this. Also see -c notes. A sample query tool (p0fq) is provided in the test/ subdirectory. There is also a trivial perl implementation of a client available; finally, test/p0fping.c can be used to check the status of the socket prior to queries. NOTE: The socket will be created with permissions corresponding to your current umask. If you want to restrict access to this interface, use caution. This option is currently Unix-only. -0 (In conjunction with -Q) Treat source port 0 in queries as a wildcard. This is useful when p0f query is constructed from within a plugin to a program that does not provide source port information (this holds true for some mail filters, etc). Note that some ambiguity is introduced: the response might not refer to the exact connection the plugin is handling, which may (seldom) cause misidentification of NATed hosts. -e ms - packet capture window. On some systems (particularly on older Suns), the default pcap capture window of 1 ms is insufficient, and p0f may get no packets. In such a case, adjust this parameter to the smallest value that results in reliable operation (note that this might introduce some latency to p0f). -c size - cache size for -Q and -M options. The default is 128, which is sane for a system under a moderate network load. Setting it too high will slow down p0f and may result in some -M false positives for dial-up nodes, dual-boot systems, etc. Setting it too low will result in cache misses for -Q option. To choose the right value, use the number of connections on average per the interval of time you want to cache, then pass it to p0f with -c. P0f, when run without -q, also reports average packet ratio on exit. You can use this to determine the optimal -c setting. This option has no effect if you do not use -Q nor -M. -u user - this option forces p0f to chroot to this user's home directory after reading configuration data and binding to sockets, then to switch to his UID, GID and supplementary groups. This is a security feature for the paranoid - when running p0f in daemon mode, you might want to create a new unprivileged user with an empty home directory, and limit the exposure when p0f is compromised. That said, should such a compromise occur, the attacker will still have a socket he can use for sniffing some network traffic (better than rm -rf /). This option is Unix-only. -N - inhibit guesswork; do not report distances and link media. With this option, p0f logs only source IP and OS data. -F - deploy fuzzy matching algorithm if no precise matches are found (currently applies to TTL only). This option is not recommended for RST+ mode. -D - do not report OS details (just genre). This option is useful if you don't want p0f to elaborate on OS versions and such (combine with -N). -U - do not display unknown signatures. Use this option if you want to keep your log file clean and are not interested in hosts that are not recognized. -K - do not display known signatures. This option is useful when you run p0f recreationally and want to spot UFOs, or in -Q or -M modes when combined with -U to inhibit all output. -q - be quiet - do not display banners and keep low profile. -p - switch card to promiscuous mode; by default, p0f listens only to packets addressed or routed thru the machine it runs on. This setting might decrease performance, depending on your network design and load. On switched networks, this usually has little or no effect. Note that promiscuous mode on IP-enabled interfaces can be detected remotely, and is sometimes not welcome by network administrators. -t - add human-readable timestamps to every entry (use multiple times to change date format, a la tcpdump). -d - go into daemon mode (detach from current terminal and fork into background). Requires -o. -l - outputs data in line-per-record style (easier to grep). -A - a semi-supported option for SYN+ACK mode. This option will cause p0f to fingerprint systems you connect to, as opposed to systems that connect to you (default). With this option, p0f will look for p0fa.fp file instead of the usual p0f.fp. The usual config is NOT SUITABLE for this mode. The SYN+ACK signature database is sort of small at the moment, but suitable for many uses. Feel free to contribute. -R - a barely-supported option for RST+ mode. This option will prompt p0f to fingerprint several different types of traffic, most importantly "connection refused" and "timeout" messages. This mode is similar to SYN+ACK (-A), except that the program will now look for p0fr.fp. The usual config is NOT SUITABLE for this mode. You may have to familiarize yourself with p0fr.fp before using it. -O - absolutely experimental open connection (stray ACK) fingerprinting mode. In this mode, p0f will attempt to indiscriminately identify OS on all packets within an already established connection. The only use of this mode is to perform an immediate fingerprinting of an existing session. Because of the sheer amount of output, you are advised against running p0f in this mode for extended periods of time. The program will use p0fo.fp file to read fingerprints. The usual config is NOT SUITABLE for this mode. Do not use unless you know what you are doing. NOTE: The p0fo.fp database is very sparsely populated at the moment. -r - resolve host names; this mode is MUCH slower and poses some security risk. Do not use except for interactive runs or low traffic situations. NOTE: the option ONLY resolves IP address into a name, and does not perform any checks for matching reverse DNS. Hence, the name may be spoofed - do not rely on it without checking twice. -C - perform collision check on signatures prior to running. This is an essential option whenever you add new signatures to .fp files, but is not necessary otherwise. -L - list all network interfaces. This option is Windows-only. -x - dump full packet contents; this option is not compatible with -l and is intended for debugging and packet comparison only. -X - display packet payload; rarely, control packets we examine may carry a payload. This is a bug for the default (SYN) and -A (SYN+ACK) modes, but is (sometimes) acceptable in -R (RST+) mode. -M - deploy masquerade detection algorithm. The algorithm looks over recent (cached) hits and looks for indications of multiple systems being behind a single gateway. This is useful on routers and such to detect policy violations. Note that this mode is somewhat slower due to caching and lookups. Use with caution (or do not use at all) in modes other than default (SYN). -T nn - masquerade detection threshold; only meaningful with -M, sets the threshold for masquerade reporting. -V - use verbose masquerade detection reporting. This option describes the status of all indicators, not only an overall value. -v - enable support for 802.1Q VLAN tagged frames. Available on some interfaces, on other, will result in BPF error. The last part, 'filter rule', is a bpf-style filter expression for incoming packets. It is very useful for excluding or including certain networks, hosts, or specific packets, in the logfile. See man tcpdump for more information, few examples: 'src port ftp-data' 'not dst net 10.0.0.0 mask 255.0.0.0' 'dst port 80 and ( src host 195.117.3.59 or src host 217.8.32.51 )' The baseline rule is to select only TCP packets with SYN set, no RST, no ACK, no FIN (SYN, ACK, no RST, no FIN for -A mode; RST, no FIN, no SYN for -R mode; ACK, no SYN, no RST, no FIN for stray ACK mode). You cannot make the rule any broader (without cheating ;), the optional filter expression can only narrow it down. You can also use a companion log report utility for p0f. Simply run 'p0frep' for help. ----------------------------- 5. Active service integration ----------------------------- In some cases, you want to feed the p0f output to a specific application to take certain active measures based on the operating system (handle specific visitors differently, block some unwanted OSes, optimize the content served). As mentioned earlier, OpenBSD users can simply use the pf OS fingerprinting implementation, a cool functionality coded by Mike Frantzen and based on p0f methodology and signature database. This software allows them to redirect or block OSes any way they want. Linux netfilter users can also check out patches by Evgeniy Polyakov to get roughly the same stuff. In other setups, or if you do not feel like fiddling with the kernel, you want to use the -Q option, and then query p0f by connecting to a specific local stream socket and sending a single packet with p0f_query struct (p0f-query.h), and receiving p0f_response. P0f, when running in -Q mode, will cache a number of last OS matches, and when queried for a specified host and port combination, will return what it detected. Check test/p0fq.c for a clean example. The query structure (p0f_query) has the following fields (all values, addresses and port numbers are in machine's native endian): magic - must be set to QUERY_MAGIC, id - query ID, copied literally to the response, type - query type (must be QTYPE_FINGERPRINT) src_ad - source address, dst_ad - destination address, src_port - source port, dst_port - destination port. The response (p0f_response) is as follows: magic - must be set to QUERY_MAGIC, id - copied from the query, type - RESP_OK, RESP_BADQUERY (error), RESP_NOMATCH (cache miss), genre[20] - OS genre, zero length if no match, detail[40] - OS version, zero length if no match, dist - distance, -1 if unknown, link[30] - link type description, zero length if unknown, tos[30] - ToS information, zero length if unknown, fw,nat - firewall and NAT flags, if spotted, real - "real" OS versus userland stack, score - masquerade score (or NO_SCORE), see next section, mflags - exact masquerade flags (D_*), see next section. There's also a special type of queries, where type = QTYPE_STATUS, and subsequent fields are irrelevant (should be zero); this returns a different structure: magic - must be set to QUERY_MAGIC, id - copied from the query type - must be set to RESP_STATUS (or RESP_BADQUERY on error) version[16] - p0f version mode - p0f mode (ASCII character, same as in command-line options) fp_cksum - checksum of the fingerprint file for versioning purposes cache - cache size packets - total number of packets analyzed matched - total number of OSes recognized queries - total number of queries handled cmisses - cache misses (for cache size debugging) uptime - process uptime in seconds The connection is one-shot. Always send the query and recv the response immediately after connect - p0f handles the connection in a single thread, and you are blocking other applications (until timeout, that is, the timeout is defined as two seconds in config.h). As of today, there is no way to integrate p0f with other programs as a packet-parsing library. It would be trivial to implement this, but there are no volunteers at the moment :-) --------------------------- 6. SQL database integration --------------------------- At the very moment, p0f does not feature built-in database connectivity, although I am looking for a willing contributor to take care of it. In the meantime, however, you may use p0f_db utility authored by Nerijus Krukauskas: https://nk.puslapiai.lt/projects/p0f_db/ Jonas Eckerman has some tools to make it easier to move p0f output from one system to another, and then to run basic visualization: https://whatever.frukt.org/p0f-stats.shtml ----------------------- 7. Masquerade detection ----------------------- Masquerade detection (-M) works by looking at the following factors for all known signatures that belong to real operating systems (and not userland tools such as scanners): - Differences in OS fingerprints for the same IP: -3 if the same OS +4 if different signature for the same OS genre +6 if different OS genres - NAT and firewall flags set: +4 if NAT flags differ for the same signature +4 if fw flags differ for the same signature +1 per each NAT and fw flag if signatures differ (max. 4) - Link type differences: +4 if media type differs - Distance differences: +1 if host distance differs - Timestamp scoring, if timestamps available: -1 if timestamp delta within MAX_TIMEDIF (config.h) +1 if timestamp delta past MAX_TIMEDIF +2 if timestamp delta negative (!) - Time from the previous occurrence: /2 if more than half the cache size to the previous occurrence The final score is reported as score * 200 / 25 (25 being the highest score possible) and reported as a percentage. The higher the value, the more likely the result is accurate. Since the situation when all indicators are up is rather unrealistic, the multiplier is 200, not 100, and you can get over 100% match ;-) Everything above 0% should be looked at, over 20% is usually a sure bet. You can configure the reporting of matches by setting the threshold to a value different than zero with -T switch. -T 10 might be a good idea. If you're looking at a local network, you can define DIST_EXTRASCORE to score distance differences much higher - it is unlikely for a local LAN to shrink or grow, but it's not uncommon for routing over the Internet to change. If you are unhappy with the scoring algorithm and do not want to modify the sources, you can use -V option to report the status of every masquerade indicator. In conjunction with -l, -V can be used to grep for the precise set of signatures you're interested in. Every hit is prefixed with ">> ". Combine -M, -K and -U to report masquerade hits only (but it is recommended to still dump packets with -w to be able to examine the evidence later on). A good example: p0f -M -K -U -w evidence.bin -c 500 -l -V 'not src host my_ip' A quick demo: 192.165.38.73:20908 - OpenBSD 3.0-3.4 (up: 836 hrs) -> 217.8.32.51:80 (distance 6, link: GPRS or FreeS/WAN) 192.165.38.73:21154 - Linux 2.4/2.6 (NAT!) (up: 173 hrs) -> 217.8.32.51:80 (distance 6, link: GPRS or FreeS/WAN) 192.165.38.73:22003 - Windows XP Pro SP1, 2000 SP3 (NAT!) -> 217.8.32.51:80 (distance 6, link: GPRS or FreeS/WAN) >> Masquerade at 192.165.38.73: indicators at 69%. That was quite evident. 194.68.64.2:49030 - Windows 2000 SP2+, XP SP1 -> 217.8.32.51:80 (distance 10, link: ethernet/modem) 194.68.64.2:52942 - Windows 2000 SP4, XP SP1, patched 98 -> 217.8.32.51:80 (distance 12, link: ethernet/modem) >> Masquerade at 194.68.64.2: indicators at 43%. The host has a name of gateway.vlt.se, so once again, a good hit. Verbose output looks like this: >> Masquerade at 216.88.158.142/crawlers.looksmart.com: indicators at 26%. Flags: OS -far In this case, we have two different OSes (OS), but the time between two occurrences is long enough to lower the score (-far). All -V flags are: OS - different OS genres VER - different OS versions LINK - link type difference DIST - distance differences xNAT - NAT flags differ (same OS match) xFW - FW flags differ (same OS match) NAT1, NAT2 - NAT flags set (different OSes) FW1, FW2 - FW flags set (different OSes) FAST - timestamp delta too high TNEG - timestamp delta negative -time - timestamp delta within the norm -far - distant occurrences Because the score is cumulative, it is possible to have mutually exclusive flags set (e.g xNAT and NAT1) whenever more than two signatures were taken into account when calculating the score. Masquerade status and flags can be also retrieved via the query interface, as noted in the section above. The functionality depends on keeping the fingerprint database clean and prefixing non-OS fingerprints (nmap, other scanner tools, application-induced TCP/IP stack behavior) with - prefix. Those fingerprints, as well as all the UNKNOWNs, are not used for masquerade detection. Note that a single host can be reported many times. The system reports immediately, but later on, the host might score higher once new data arrives, and p0f will post a "correction" with a new, higher ranking. Use the highest result for a specific host, but also observe the consistency of subsequent results. The solution uses a cyclic buffer also used in -Q mode (and affected by -c parameter). You should set the value to cache not more than an hour of traffic (and no less than a minute). Calculate the number of connections on average per the interval of time you wish to cache, then pass the value to p0f with -c. Setting -c too high will result in false positives for dial-up nodes or multiboot systems (of course, you sometimes want to detect the latter, too). Setting it too low may miss some cases. The code detects NAT devices that do not rewrite packets (almost all packet firewalls). Ones that do rewrite packets (proxy firewalls) can, on the other hand, be detected by their own signatures. Masquerade detection will fail if all systems masqueraded have an identical configuration and network setup, uptimes and network usage (which is very unlikely, even in a homogeneous environment). A prerequisite for detection is that the systems are used at (roughly) the same time, within the cache time frame. NOTE: The detector is most reliable and sensitive in the default (SYN) mode, and scores are adjusted to work well there; in other fingerprinting modes, your mileage may vary. You can try to combine -M with -A (masquerade detection on systems you connect to), which is only really useful for detecting load balancers and other setups that map a single address to several servers; or with -R, which can be used both for detecting load balancers (RST) and normal incoming masquerade detection (RST+ACK), although it's naturally less reliable and sensitive. Using -M with -O is weird, but regrettably not prosecuted. ---------------------------------------- 8. Fingerprinting accuracy and precision ---------------------------------------- Version 2 uses some more interesting TCP/IP packet metrics, and should be inherently more accurate and precise. We also try to use common sense when adding and importing signatures, which should be a great reliability boost. More obscure modes, such as RST+ or stray ACK, may and will be inherently less accurate or reliable - see section 10 for more details - but are still far more sane than p0f v1. Link type identification is not particularly reliable, as some users tend to mess with their default MTUs for better (or worse ;-) performance. For most systems, it will be accurate, but if you see an unlikely value reported, just deal with it. Uptime detection is also of an amusement value. Some newly released systems tend to multiply timestamp data by 10 or have other clocking algorithms. The current version of p0f does not support those differences over the entire database. I will try to fix it, until then, those boxes would have an artificially high uptime. NAT detection is merely an indication of MSS being tweaked at some point. Most likely, the reason for this is indeed a NATing router, but there are some other explanations. Linux, for example, tends to mix up MTUs from different interfaces in certain scenarios (when, I'm not sure, but it's common and is probably a bug), and if you see a Linux box tagged as "NAT", it does not have to be NATed - it might simply have two network interfaces. P0f can still be a useful NAT detection tool (you can examine changing distances and OS matches for a specific host, too), simply don't rely on this flag alone. If you see link type identified as unknown-XXXX, try to Google for "mtu XXXX". If you find something reasonable, you might want update mtu.h and recompile p0f, and submit this information to me. Keep in mind some MTU settings are just arbitrary and do not have to mean a thing. P0f also tries to recognize some less popular combinations of precedence bits, type of service and so-called "must be zero" bit in TCP headers to detect certain origin ISPs. Many DSL and cable operators, particularly in Europe, tend to configure their routers in fairly unique ways in this regard. This, again, is purely of an amusement value. See tos.h for more information. P0f will never be as precise as NMAP, simply because it has to rely on what the host sends by itself, and can't check how it responds to "invalid" or tweaked packets. On the other hand, in the times of omnipresent personal and not quite personal firewalls and such, p0f can often help where NMAP is confused. Just like with any fingerprinting utility, active or passive, it is possible to change TCP/IP stack settings to either avoid identification, or appear as some other system - although some of the changes might require kernel-space hacking. There are no publicly available anti-p0f tools yet, although I expect them to appear at some point. -------------------- 9. Adding signatures -------------------- To avoid decreasing reliability of the database, you MUST read the information provided at the beginning of p0f.fp carefully before touching it in any way! If you are fiddling with p0fa.fp, p0fr.fp or p0fo.fp, read all comments in those files IN ADDITION to the contents of p0f.fp. Those files provide a good technical primer, and document the format and subtleties of all the fingerprints. If you stumble upon a new signature, do consider submitting it to [email protected], [email protected], or connecting from the system to https://lcamtuf.coredump.cx/p0f-help/. We will be happy to incorporate this signature in the official release, and can help you make your signature more accurate. The least popular the system is, the more valuable the signature; we have the mainstream covered quite well. Be sure to run p0f -C after making any additions. This will run a collision checker and warn about shadowed or possibly incorrect signatures. This happens more often than you'd think. The same applies to p0fa.fp, p0fr.fp and p0fo.fp files. You need to run p0f -A -C, p0f -R -C or p0f -O -C to verify their contents. Rest assured, you will sooner or later find something really surprising. You can look at tmp/ to see a current list of mysteries I've stumbled upon. The museum at https://lcamtuf.coredump.cx/mobp/ lists some other funky cases. By all means, I'd like to hear about other UFO sightings! ------------ 10. Security ------------ Running p0f as a daemon should pose a fairly low risk, compared to tcpdump or other elaborate packet parsers (Ettercap, Ethereal, etc). P0f does not attempt anything stupid, such as parsing tricky high-level protocols. There is a slight risk I screwed up something with the option parser or such, but this code should be very easy to audit. If you do not feel too comfortable, you can always use the -u option, which should mitigate the risk. General security precautions for operating p0f: - Do not make p0f setuid, setgid or otherwise privileged when the caller isn't. Running it via sudo for users you do not trust entirely is also a so-so idea. - Do not use -r option unless absolutely necessary, and only for short and supervised runs. The option introduces a bloated, potentially flawed libc DNS handling code, and has a DoS potential. - When running in -Q mode, you need to make sure, either by setting umask or calling chmod/chown after launching p0f, to set correct permissions on the query socket - that is, unless you don't see a problem with your users querying p0f, which isn't a great threat to the humanity. - Do not use world-writable directories for keeping the socket. Do not use world-writable directories for output files or configuration. Come to think about it, don't use world-writable directories for any purpose. - Don't panic. --------------- 11. Limitations --------------- There are several generic and some specific limitations as to what passive fingerprinting and p0f can achieve. Proxy firewalls and other high-level proxy devices are not transparent to any TCP-level fingerprinting software. The device itself will be fingerprinted, not actual source hosts. There is some software that lets you perform application fingerprinting, this isn't it. Some packet firewalls configured to normalize outgoing traffic (OpenBSD pf with "scrub" enabled, for example) will, well, normalize packets. Those signatures will not correspond to the originating system, and probably not quite to the firewall either. Checkpoint firewall, in a fairly lame attempt to defeat OS fingerprinting, tweaks IP ID and TTL on outgoing packets; if you want to work around this problem, run p0f with -F option. In default mode, in order to obtain the information required for fingerprinting, you have to receive at least one SYN packet initiating a TCP connection to your machine or network. Note: you don't have to respond to this particular SYN, and it's perfectly fine to respond with RST. For SYN+ACK fingerprinting, you must be able to connect to at least one open port on the target machine to actually get SYN+ACK packet. You do not need any other ports, or the ability to send awkward, multiple or otherwise suspicious packets to the remote host (unlike with NMAP). Also note that SYN+ACK fingerprints are somewhat affected by the initial SYN on some systems. If you cannot establish a connection, but the remote party at least sends you RST+ACK back ("Connection refused"), you can use RST+ mode of p0f (-R option), but be aware this mode is inherently less accurate and reliable, mostly because systems usually don't bother with putting any options in those packets, and they all look very similar. SYN+ACK fingerprinting is considered (by me) to be less accurate and sometimes dependent on the system that initiates the connection. Same goes for (again, experimental!) stray ACK fingerprinting. RST+ fingerprinting mode, on the other hand, is fairly reliable, but far less precise. This is why I put stress on developing the SYN fingerprinting capability - but SYN+ACK, RST+ and stray ACK database contributions and tricks are of course very welcome. Fingerprinting on a fully established (existing) TCP connection is now supported by p0f (since version 2.0.5), but the database contains very few entries, and the accuracy and applicability of this mode is not yet well established. Be prepared for this mode to produce excessive amounts of logs. What I'll be trying to do is to integrate a number of fingerprinting techniques, currently completely separate (SYN, SYN+ACK, ACK, FIN, RST, retransmission timing, etc) into a single solution for very high accuracy. But this is perhaps p0f 3.0. ------------------------------------- 12. Is it better than other software? ------------------------------------- Depends on what you need. As I said before, p0f is fast, lightweight, low-profile. It can be integrated with other services. It has a clean and simple code, runs as a single thread and uses very little CPU power, works on a number of systems (Linux, BSD, Solaris and probably others), has a pretty detailed and accurate fingerprint database. Quite frankly, I doubt there is a program that offers better overall functionality or accuracy when it comes to passive fingerprinting, but I would not be surprised to be proved wrong one day. In other words, feel free to explore alternatives. Of the ones I know... is it better than Siphon? Yes. Ettercap? Yes, version 2 is better than v1-derived fingerprinting in Ettercap. Besides, it's simply different, and intended for a different range of applications. Version 1 of p0f did implement many novel fingerprinting metrics that were later incorporated in other software, but so did version 2 - and others are yet to catch up. As to other "current" utilities, you can use masqdet by Wojtek Kaniewski as an alternative to p0f -M mode. On the web, you can also stumble upon "n0t" and "natdet" utilities authored by a guy going by the nickname r3b00t, but these are just dumbed-down and inherently less reliable rip-offs closely inspired on p0f code. Your mileage may vary, but I recommend you to avoid them: they won't work any better. -------------------- 13. Program no work! -------------------- Whoops. We apologize. P0f requires the following to compile and run fine: - libpcap 0.4 or newer - GNU C Compiler 2.7.x or newer - GNU make 3.7x or newer, or BSD make - GNU bash / awk / grep / sed / textutils (for p0frep only) For the Windows port requirements and instructions, please read INSTALL.Win32 file. Not every platform is supported by p0f, and compilation problems do happen. Please let us know if you have any problems (or, better yet, managed to find a solution). If you find a system that is either not recognized, or is fingerprinted incorrectly, please do not downplay this and let us know. Platforms known to be working fine (regression tests not done on a regular basis, though): - NetBSD - FreeBSD - OpenBSD - MacOS X - Linux (2.0 and up) - Solaris (2.6 and up) - Windows (see INSTALL.Win32) - AIX (you need precompiled BULL libpcap) If p0f compiles and runs, but displays "unknown datalink" or "bad header_len" warnings, it is likely that your network interface type is not (yet) recognized. Let us know, it is easy to fix that once and for all users. ---------------------------------------- 14. Links to OS fingerprinting resources ---------------------------------------- Recommended RFC reading: https://www.faqs.org/rfcs/rfc793.html - TCP/IP specification https://www.faqs.org/rfcs/rfc1122.html - TCP/IP tutorial https://www.faqs.org/rfcs/rfc1323.html - performance extensions https://www.faqs.org/rfcs/rfc1644.html - T/TCP extensions https://www.faqs.org/rfcs/rfc2018.html - TCP/IP selective ACK Practical information: Active ICMP fingerprinting: https://www.sys-security.com/html/papers.html Passive OS fingerprinting basics: https://project.honeynet.org/papers/finger/ https://www.linuxjournal.com/article.php?sid=4750 THC Amap, application fingerprinting: https://www.thc.org/releases.php Hmap, web server fingerprinting: https://wwwcsif.cs.ucdavis.edu/~leed/hmap/ Fyodor's NMAP, the active fingerprinter: https://www.nmap.org User-Agent information: https://www.siteware.ch/webresources/useragents/db.html Ident fingerprinting: https://www.team-teso.net/data/ldistfp-auth-fingerprints Other free tools known to have passive OS fingerprinting: P0f-based: https://ettercap.sourceforge.net/ - Ettercap (p0f v1) https://prelude-ids.org - Prelude IDS (p0f v1) https://www.w4g.org/fingerprinting.html - OpenBSD pf (p0f v2.0.1) https://cvs.netfilter.org/~checkout~/netfilter/patch-o-matic//base/osf.patch - Linux netfilter (p0f v2.0) https://www-nrg.ee.lbl.gov/bro.html - Vern Paxson's / Holger Dreger's NIDS (p0f v2.0) https://r3b00t.itsec.pl/ - n0t and natdet (ripped off, AFAICT) Independent codebase: https://www.raisdorf.net/projects/pfprintd - pfprintd https://siphon.datanerds.net - Siphon (very out of date) https://members.fortunecity.com/sektorsecurity/projects/archaeopteryx.html (Siphon w/GUI) https://toxygen.net/misc/ - masqdet (NAT detection only)
About
p0f 2.0.8
Resources
License
Stars
Watchers
Forks
Releases
No releases published
Packages 0
No packages published