Skip to content

sebirdman/hass_traeger

Repository files navigation

Traeger HASS component

GitHub Release License hacs

Component to integrate with Traeger WiFire Grills.

This component will set up the following platforms.

Platform Description
sensor Shows various temperature readings from the grill or accessories
climate Allows temperature control of the grill and probe
number Allows minutes input to the timer
switch Allow SuperSmoke, Keepwarm, and connectivity switch

device lovelace grill probe

Installation (Manual)

  1. Using the tool of choice open the directory (folder) for your HA configuration (where you find configuration.yaml).
  2. If you do not have a custom_components directory (folder) there, you need to create it.
  3. In the custom_components directory (folder) create a new folder called traeger.
  4. Download all the files from the custom_components/traeger/ directory (folder) in this repository.
  5. Place the files you downloaded in the new directory (folder) you created.
  6. Restart Home Assistant
  7. In the HA UI go to "Configuration" -> "Integrations" click "+" and search for "Traeger"

Platform Details

Some of the platforms are fairly self explanatory, others could use a little more explaining. Below are more details on some of those platforms.

Grill State Sensor

This sensor aligns with the status values in the Traeger app.

State Description
offline Powered off (or not accesible)
sleeping Standing by (power switch on, screen off)
idle Standing by (power switch on, screen on)
igniting Igniting the fire pot
preheating Ignition is complete, heating to set temperature
manual_cook Cooking mode
custom_cook Cooking mode, using preset cook cycle
cool_down Cool down cycle
shutdown Cool down cycle complete, heading to sleep
unknown Unkown state, report to developers

Heating State Sensor

This sensor tries to provide more useful insight into the heating status of the grill. Many of these values can be trigger off of to provide notifications that are not available in the Traeger app.

State Description
idle Not in igniting, preheating, cooking or cool_down modes
preheating Igniting or preheating (and under 165°F)
heating Trying to get temperature up to new target temperature
cooling Trying to get temperature down to new target temperature
at_temp Temperature has reached the target temperature (and is holding at ±20°F of target temperature)
over_temp Was at_temp, but is now more than 20°F above target temperature
under_temp Was at_temp, but is now more than 20°F below target temperature
cool_down Cool down cycle

Probe State Sensor

This sensor provides triggers for useful probe events such as being close to the target temperature or reaching the target temperature.

State Description
idle Probe target temperature is not set (or grill is not in igniting, preheating or cooking modes)
set Probe target temperature is set
close Probe temperature is within 5°F of target temperature
at_temp Probe alarm has fired
fell_out Probe probably fell out of the meat (Probe temperature is greater that 215°F)

Installation (HACS)

  1. Add this repository to HACS
  2. Search for Traeger in HACS

Configuration is done in the UI

Contributions are welcome!

If you want to contribute to this please read the Contribution guidelines