Skip to content

season-lab/z3

Repository files navigation

Z3

Z3 is a theorem prover from Microsoft Research. It is licensed under the MIT license.

If you are not familiar with Z3, you can start here.

Pre-built binaries for stable and nightly releases are available from here.

Z3 can be built using Visual Studio, a Makefile or using CMake. It provides bindings for several programming languages.

See the release notes for notes on various stable releases of Z3.

Build status

Azure Pipelines TravisCI
Build Status Build Status

Building Z3 on Windows using Visual Studio Command Prompt

32-bit builds, start with:

python scripts/mk_make.py

or instead, for a 64-bit build:

python scripts/mk_make.py -x

then:

cd build
nmake

Building Z3 using make and GCC/Clang

Execute:

python scripts/mk_make.py
cd build
make
sudo make install

Note by default g++ is used as the C++ compiler if it is available. If you would prefer to use Clang change the mk_make.py invocation to:

CXX=clang++ CC=clang python scripts/mk_make.py

Note that Clang < 3.7 does not support OpenMP.

You can also build Z3 for Windows using Cygwin and the Mingw-w64 cross-compiler. To configure that case correctly, make sure to use Cygwin's own python and not some Windows installation of Python.

For a 64 bit build (from Cygwin64), configure Z3's sources with

CXX=x86_64-w64-mingw32-g++ CC=x86_64-w64-mingw32-gcc AR=x86_64-w64-mingw32-ar python scripts/mk_make.py

A 32 bit build should work similarly (but is untested); the same is true for 32/64 bit builds from within Cygwin32.

By default, it will install z3 executable at PREFIX/bin, libraries at PREFIX/lib, and include files at PREFIX/include, where PREFIX installation prefix if inferred by the mk_make.py script. It is usually /usr for most Linux distros, and /usr/local for FreeBSD and macOS. Use the --prefix= command line option to change the install prefix. For example:

python scripts/mk_make.py --prefix=/home/leo
cd build
make
make install

To uninstall Z3, use

sudo make uninstall

To clean Z3 you can delete the build directory and run the mk_make.py script again.

Building Z3 using CMake

Z3 has a build system using CMake. Read the README-CMake.md file for details. It is recommended for most build tasks, except for building OCaml bindings.

Z3 bindings

Z3 has bindings for various programming languages.

.NET

You can install a nuget package for the latest release Z3 from nuget.org.

Use the --dotnet command line flag with mk_make.py to enable building these.

On non-windows platforms mono is required. On these platforms the location of the C# compiler and gac utility need to be known. You can set these as follows if they aren't detected automatically. For example:

CSC=/usr/bin/csc GACUTIL=/usr/bin/gacutil python scripts/mk_make.py --dotnet

Note for very old versions of Mono (e.g. 2.10) you may need to set CSC to /usr/bin/dmcs.

Note that when make install is executed on non-windows platforms the GAC utility is used to install Microsoft.Z3.dll into the GAC as the Microsoft.Z3.Sharp package. During install a pkg-config file (Microsoft.Z3.Sharp.pc) is also installed which allows the MonoDevelop IDE to find the bindings. Running make uninstall will remove the dll from the GAC and the pkg-config file.

See examples/dotnet for examples.

C

These are always enabled.

See examples/c for examples.

C++

These are always enabled.

See examples/c++ for examples.

Java

Use the --java command line flag with mk_make.py to enable building these.

See examples/java for examples.

OCaml

Use the --ml command line flag with mk_make.py to enable building these.

See examples/ml for examples.

Python

You can install the Python wrapper for Z3 for the latest release from pypi using the command

   pip install z3-solver

Use the --python command line flag with mk_make.py to enable building these.

Note that is required on certain platforms that the Python package directory (site-packages on most distributions and dist-packages on Debian based distributions) live under the install prefix. If you use a non standard prefix you can use the --pypkgdir option to change the Python package directory used for installation. For example:

python scripts/mk_make.py --prefix=/home/leo --python --pypkgdir=/home/leo/lib/python-2.7/site-packages

If you do need to install to a non standard prefix a better approach is to use a Python virtual environment and install Z3 there. Python packages also work for Python3. Under Windows, recall to build inside the Visual C++ native command build environment. Note that the build/python/z3 directory should be accessible from where python is used with Z3 and it depends on libz3.dll to be in the path.

virtualenv venv
source venv/bin/activate
python scripts/mk_make.py --python
cd build
make
make install
# You will find Z3 and the Python bindings installed in the virtual environment
venv/bin/z3 -h
...
python -c 'import z3; print(z3.get_version_string())'
...

See examples/python for examples.

Web Assembly

WebAssembly bindings are provided by Clément Pit-Claudel.

System Overview

System Diagram

Interfaces

  • Default input format is SMTLIB2

  • Other native foreign function interfaces:

    • C
    • C++
    • Python
    • Java
    • C#
    • OCaml