This driver is an expansion of the Ladybug driver in Autoware driver. The key changes are more config options and added support for the Ladybug 5+ camera. See below for the install instructions, and the parameters that can be set in the launch file. Also this prints out more information about the configuration, so you should check if your camera is running on USB2 or USB3 according to the SDK library.
framerate- framerate of the camera (example 10-20 fps)shutter_time- time in second the shutter should be open (example 0.02-2 seconds)gain- amount of gain the image should have applied (example 0-18 db)
- Download SDK - https://www.ptgrey.com/Downloads/GetSecureDownloadItem/10997
sudo apt-get install xsdcxx- Extract SDK to get deb file
sudo dpkg -i ladybug-1.15.3.23_amd64.deb- Open the /etc/default/grub file in any text editor. Find and replace:
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"- With:
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash usbcore.usbfs_memory_mb=1000"
sudo update-grub- restart computer
- check that it is enabled:
cat /sys/module/usbcore/parameters/usbfs_memory_mb
- The package should be installed as a system package
- If you need to use other pointgrey drivers (that also use the libflycapture.so file)
sudo apt-get remove ladybug