New on 0.10.0:
- Makefile generation (for local use, avoiding to redo unneeded stuff)
- Compressed files generation (to gather deliverables)
- Import outputs from another project (i.e. gerber and drill recipe for a particular manufacturer)
- Multi-project consolidated BoMs
- Sortable HTML BoMs (choose any column)
- Introduction
- Configuration
- Usage
- Installation
- Usage for CI/CD
- Notes about Gerber format
- Notes about the position file
- Credits
KiBot is a program which helps you to generate the fabrication and documentation files for your KiCad projects easily, repeatable, and most of all, scriptably. This means you can use a Makefile to export your KiCad PCBs just as needed.
For example, it's common that you might want for each board rev:
- Check ERC/DRC one last time (using KiCad Automation Scripts)
- Gerbers, drills and drill maps for a fab in their favourite format
- Fab docs for the assembler, including the BoM (Bill of Materials), costs spreadsheet and board view
- Pick and place files
- PCB 3D model in STEP format
- PCB 3D render in PNG format
You want to do this in a one-touch way, and make sure everything you need to do so is securely saved in version control, not on the back of an old datasheet.
KiBot lets you do this. The following picture depicts the data flow:
If you want to see this concept applied to a real world project visit the Spora CI/CD example.
KiBot uses a configuration file where you can specify what outputs to generate. By default you'll generate all of them, but you can specify which ones from the command line.
The configuration file should be named using the .kibot.yaml suffix, i.e. my_project.kibot.yaml. The format used is YAML. This is basically a text file with some structure. This file can be compressed using gzip file format.
If you never used YAML read the following explanation. Note that the explanation could be useful even if you know YAML.
All configuration files must start with:
kibot:
version: 1
This tells to KiBot that this file is using version 1 of the format.
This section is used to specify tasks that will be executed before generating any output.
check_zone_fills
: [boolean=false] Zones are filled before doing any operation involving PCB layers.erc_warnings
: [boolean=false] Option forrun_erc
. ERC warnings are considered errors.filters
: [list(dict)] A list of entries to filter out ERC/DRC messages.- Valid keys:
error
: [string=''] Error id we want to exclude. A name for KiCad 6 or a number for KiCad 5, but always a string.- error_number: Alias for number.
filter
: [string=''] Name for the filter, for documentation purposes.- filter_msg: Alias for filter.
number
: [number=0] Error number we want to exclude. KiCad 5 only.regex
: [string='None'] Regular expression to match the text for the error we want to exclude.- regexp: Alias for regex.
- Valid keys:
ignore_unconnected
: [boolean=false] Option forrun_drc
. Ignores the unconnected nets. Useful if you didn't finish the routing.pcb_replace
: [dict] Replaces tags in the schematic. I.e. to insert the git hash or last revision date. This pre-flight modifies the PCB. Even when a back-up is done use it carefully.- Valid keys:
date_command
: [string=''] Command to get the date to use in the PCB.
git log -1 --format='%as' -- $KIBOT_PCB_NAME
Will return the date in YYYY-MM-DD format.
date -d @`git log -1 --format='%at' -- $KIBOT_PCB_NAME` +%Y-%m-%d_%H-%M-%S
Will return the date in YYYY-MM-DD_HH-MM-SS format.
Important: on KiCad 6 the title block data is optional. This command will work only if you have a date in the PCB/Schematic.replace_tags
: [dict|list(dict)] Tag or tags to replace.- Valid keys:
after
: [string=''] Text to add after the output ofcommand
.before
: [string=''] Text to add before the output ofcommand
.command
: [string=''] Command to execute to get the text, will be used only iftext
is empty. KIBOT_PCB_NAME variable is the name of the current PCB.tag
: [string=''] Name of the tag to replace. Useversion
for a tag named@version@
.tag_delimiter
: [string='@'] Character used to indicate the beginning and the end of a tag. Don't change it unless you really know about KiCad's file formats.text
: [string=''] Text to insert instead of the tag.
- Valid keys:
- Valid keys:
run_drc
: [boolean=false] Runs the DRC (Distance Rules Check). To ensure we have a valid PCB. The report file name is controlled by the global output pattern (%i=drc %x=txt).run_erc
: [boolean=false] Runs the ERC (Electrical Rules Check). To ensure the schematic is electrically correct. The report file name is controlled by the global output pattern (%i=erc %x=txt).sch_replace
: [dict] Replaces tags in the schematic. I.e. to insert the git hash or last revision date. This pre-flight modifies the schematics. Even when a back-up is done use it carefully.- Valid keys:
date_command
: [string=''] Command to get the date to use in the SCH.
git log -1 --format='%as' -- $KIBOT_SCH_NAME
Will return the date in YYYY-MM-DD format.
date -d @`git log -1 --format='%at' -- $KIBOT_SCH_NAME` +%Y-%m-%d_%H-%M-%S
Will return the date in YYYY-MM-DD_HH-MM-SS format.
Important: on KiCad 6 the title block data is optional. This command will work only if you have a date in the SCH/Schematic.replace_tags
: [dict|list(dict)] Tag or tags to replace.- Valid keys:
after
: [string=''] Text to add after the output ofcommand
.before
: [string=''] Text to add before the output ofcommand
.command
: [string=''] Command to execute to get the text, will be used only iftext
is empty. KIBOT_SCH_NAME variable is the name of the current sheet. KIBOT_TOP_SCH_NAME variable is the name of the top sheet.tag
: [string=''] Name of the tag to replace. Useversion
for a tag named@version@
.tag_delimiter
: [string='@'] Character used to indicate the beginning and the end of a tag. Don't change it unless you really know about KiCad's file formats.text
: [string=''] Text to insert instead of the tag.
- Valid keys:
- Valid keys:
update_qr
: [boolean=false] Update the QR codes. Complements theqr_lib
output. The KiCad 6 files and the KiCad 5 PCB needs manual update, generating a new library isn't enough.update_xml
: [boolean=false] Update the XML version of the BoM (Bill of Materials). To ensure our generated BoM is up to date. Note that this isn't needed when using the internal BoM generator (bom
).
Here is an example of a preflight section:
preflight:
run_erc: true
update_xml: true
run_drc: true
check_zone_fills: true
ignore_unconnected: false
These options are supposed to be used in a version control environment. This is because, unlike other options, they modify the PCB and/or schematic and might damage them. In a version control environment you can just roll-back the changes.
Don't be afraid, they make a back-up of the files and also tries to disable dangerous changes. But should be used carefully. They are ideal for CI/CD environment where you don't actually commit any changes.
Sometimes KiCad reports DRC or ERC errors that you can't get rid off. This could be just because you are part of a team including lazy people that doesn't want to take the extra effort to solve some errors that aren't in fact errors, just small violations made on purpose. In this case you could exclude some known errors.
For this you must declare filters
entry in the preflight
section. Then you can add as many filter
entries as you want.
Each filter entry has an optional description and defines to which error type is applied (number
) and a regular expression
that the error must match to be ignored (regex
). Like this:
filters:
- filter: 'Optional filter description'
error: 'Error_type'
regex: 'Expression to match'
Here is a KiCad 5 example, suppose you are getting the following errors:
** Found 1 DRC errors **
ErrType(4): Track too close to pad
@(177.185 mm, 78.315 mm): Track 1.000 mm [Net-(C3-Pad1)] on F.Cu, length: 1.591 mm
@(177.185 mm, 80.715 mm): Pad 2 of C3 on F.Cu and others
** Found 1 unconnected pads **
ErrType(2): Unconnected items
@(177.185 mm, 73.965 mm): Pad 2 of C4 on F.Cu and others
@(177.185 mm, 80.715 mm): Pad 2 of C3 on F.Cu and others
And you want to ignore them. You can add the following filters:
filters:
- filter: 'Ignore C3 pad 2 too close to anything'
error: '4'
regex: 'Pad 2 of C3'
- filter: 'Ignore unconnected pad 2 of C4'
error: '2'
regex: 'Pad 2 of C4'
If you need to match text from two different lines in the error message try using (?s)TEXT(.*)TEXT_IN_OTHER_LINE
.
If you have two or more different options for a text to match try using (OPTION1|OPTION2)
.
A complete Python regular expressions explanation is out of the scope of this manual. For a complete reference consult the Python manual.
KiCad 6 uses strings to differentiate errors, use them for the error
field. To keep compatibility you can use the number
or error_number
options for KiCad 5.
Important note: this will create a file named kibot_errors.filter in the output directory.
The section global
contains default global options that affects all the outputs.
Currently only a few option are supported.
This option controls the default file name pattern used by all the outputs. This makes all the file names coherent. You can always choose the file name for a particular output.
The pattern uses the following expansions:
- %c company from pcb/sch metadata.
- %C
n
comments linen
from pcb/sch metadata. - %d pcb/sch date from metadata if available, file modification date otherwise.
- %D date the script was started.
- %f original pcb/sch file name without extension.
- %F original pcb/sch file name without extension. Including the directory part of the name.
- %g the
file_id
of the global variant. - %G the
name
of the global variant. - %i a contextual ID, depends on the output type.
- %I an ID defined by the user for this output.
- %p pcb/sch title from pcb metadata.
- %r revision from pcb/sch metadata.
- %T time the script was started.
- %x a suitable extension for the output type.
- %v the
file_id
of the current variant, or the global variant if outside a variant scope. - %V the
name
of the current variant, or the global variant if outside a variant scope.
They are compatible with the ones used by IBoM.
The default value for global.output
is %f-%i.%x
.
If you want to include the revision you could add the following definition:
global:
output: '%f_rev_%r-%i.%x'
Note that the following patterns: %c, %Cn
, %d, %f, %F, %p and %r depends on the context.
If you use them for an output related to the PCB these values will be obtained from the PCB.
If you need to force the origin of the data you can use %bX for the PCB and %sX for the schematic, where
X is the pattern to expand.
The default dir
value for any output is .
. You can change it here.
Expansion patterns are allowed.
Note that you can use this value as a base for output's dir
options. In this case the value defined in the output
must start with +
.
In this case the +
is replaced by the default dir
value defined here.
This option controls the default variant applied to all the outputs. Example:
global:
variant: 'production'
The out_dir
option can define the base outut directory. This is the same as the -d
/--out-dir
command line option.
Note that the command line option has precedence over it.
Expansion patterns are applied to this value, but you should avoid using patterns that expand according to the context, i.e. %c, %d, %f, %F, %p and %r. The behavior of these patterns isn't fully defined in this case and the results may change in the future.
- The %d, %sd and %bd patterns use the date and time from the PCB and schematic.
When abscent they use the file timestamp, and the
date_time_format
global option controls the format used. When available, and in ISO format, thedate_format
controls the format used. You can disable this reformatting assigningfalse
to thedate_reformat
option. - The %D format is controlled by the
date_format
global option. - The %T format is controlled by the
time_format
global option.
In all cases the format is the one used by the strftime
POSIX function, for more information visit this site.
The following variables control the default colors and they are used for documentation purposes:
pcb_material
[FR4] PCB core material. Currently known are FR1 to FR5solder_mask_color
[green] Color for the solder mask. Currently known are green, black, white, yellow, purple, blue and red.silk_screen_color
[white] Color for the markings. Currently known are black and white.pcb_finish
[HAL] Finishing used to protect pads. Currently known are None, HAL, HASL, ENIG and ImAg.
KiBot warnings are marked with (Wn)
where n is the warning id.
Some warnings are just recommendations and you could want to avoid them to focus on details that are more relevant to your project. In this case you can define filters in a similar way used to filter DRC/ERC errors.
As an example, if you have the following warning:
WARNING:(W43) Missing component `l1:FooBar`
You can create the following filter to remove it:
global:
filters:
- number: 43
regex: 'FooBar'
The filters and variants are mechanisms used to modify the circuit components. Both concepts are closely related. In fact variants can use filters.
The current implementation of the filters allow to exclude components from some of the processing stages. The most common use is to exclude them from some output. In the future more advanced filters will allow modification of component details.
Variants are currently used to create assembly variants. This concept is used to manufature one PCB used for various products. You can learn more about KiBot variants on the following example repo.
As mentioned above the current use of filters is to mark some components. Mainly to exclude them, but also to mark them as special. This is the case of do not change components in the BoM.
Filters and variants are defined in separated sections. A filter section looks like this:
filters:
- name: 'a_short_name'
type: 'generic'
comment: 'A description'
# Filter options
Currently the only type available is generic
.
- field_rename: Field_Rename
This filter implements a field renamer.
The internal
_kicost_rename
filter emulates the KiCost behavior.- Valid keys:
comment
: [string=''] A comment for documentation purposes.name
: [string=''] Used to identify this particular filter definition.rename
: [list(dict)] Fields to rename.- Valid keys:
field
: [string=''] Name of the field to rename.name
: [string=''] New name.
- Valid keys:
- Valid keys:
- generic: Generic filter
This filter is based on regular expressions.
It also provides some shortcuts for common situations.
Note that matches aren't case sensitive and spaces at the beggining and the end are removed.
The internal
_mechanical
filter emulates the KiBoM behavior for default exclusions. The internal_kicost_dnp
filter emulates KiCost'sdnp
field.- Valid keys:
comment
: [string=''] A comment for documentation purposes.config_field
: [string='Config'] Name of the field used to clasify components.config_separators
: [string=' ,'] Characters used to separate options inside the config field.exclude_all_hash_ref
: [boolean=false] Exclude all components with a reference starting with #.exclude_any
: [list(dict)] A series of regular expressions used to exclude parts. If a component matches ANY of these, it will be excluded. Column names are case-insensitive.- Valid keys:
column
: [string=''] Name of the column to apply the regular expression.- field: Alias for column.
invert
: [boolean=false] Invert the regex match result.match_if_field
: [boolean=false] Match if the field exists, no regex applied. Not affected byinvert
.match_if_no_field
: [boolean=false] Match if the field doesn't exists, no regex applied. Not affected byinvert
.regex
: [string=''] Regular expression to match.- regexp: Alias for regex.
skip_if_no_field
: [boolean=false] Skip this test if the field doesn't exist.
- Valid keys:
exclude_config
: [boolean=false] Exclude components containing a key value in the config field. Separators are applied.exclude_empty_val
: [boolean=false] Exclude components with empty 'Value'.exclude_field
: [boolean=false] Exclude components if a field is named as any of the keys.exclude_refs
: [list(string)] List of references to be excluded. Use R* for all references with R prefix.exclude_smd
: [boolean=false] KiCad 5: exclude components marked as smd in the PCB.exclude_tht
: [boolean=false] KiCad 5: exclude components marked as through-hole in the PCB.exclude_value
: [boolean=false] Exclude components if their 'Value' is any of the keys.exclude_virtual
: [boolean=false] KiCad 5: exclude components marked as virtual in the PCB.include_only
: [list(dict)] A series of regular expressions used to include parts. If there are any regex defined here, only components that match against ANY of them will be included. Column/field names are case-insensitive. If empty this rule is ignored.- Valid keys:
column
: [string=''] Name of the column to apply the regular expression.- field: Alias for column.
invert
: [boolean=false] Invert the regex match result.match_if_field
: [boolean=false] Match if the field exists, no regex applied. Not affected byinvert
.match_if_no_field
: [boolean=false] Match if the field doesn't exists, no regex applied. Not affected byinvert
.regex
: [string=''] Regular expression to match.- regexp: Alias for regex.
skip_if_no_field
: [boolean=false] Skip this test if the field doesn't exist.
- Valid keys:
invert
: [boolean=false] Invert the result of the filter.keys
: [string|list(string)=dnf_list] [dnc_list,dnf_list] List of keys to match. Thednf_list
anddnc_list
internal lists can be specified as strings. Usednf_list
for ['dnf', 'dnl', 'dnp', 'do not fit', 'do not load', 'do not place', 'no stuff', 'nofit', 'noload', 'noplace', 'nostuff', 'not fitted', 'not loaded', 'not placed']. Usednc_list
for ['dnc', 'do not change', 'fixed', 'no change'].name
: [string=''] Used to identify this particular filter definition.
- Valid keys:
- rot_footprint: Rot_Footprint
This filter can rotate footprints, used for the positions file generation.
Some manufacturers use a different rotation than KiCad.
The internal
_rot_footprint
filter implements the simplest case.- Valid keys:
comment
: [string=''] A comment for documentation purposes.extend
: [boolean=true] Extends the internal list of rotations with the one provided. Otherwise just use the provided list.invert_bottom
: [boolean=false] Rotation for bottom components is negated, resulting in either:(- component rot - angle)
or when combined withnegative_bottom
,(angle - component rot)
.name
: [string=''] Used to identify this particular filter definition.negative_bottom
: [boolean=true] Rotation for bottom components is computed via subtraction as(component rot - angle)
.rotations
: [list(list(string))] A list of pairs regular expression/rotation. Components matching the regular expression will be rotated the indicated angle.skip_bottom
: [boolean=false] Do not rotate components on the bottom.skip_top
: [boolean=false] Do not rotate components on the top.
- Valid keys:
- subparts: Subparts
This filter implements the KiCost subparts mechanism.
- Valid keys:
check_multiplier
: [list(string)] List of fields to include for multiplier computation. If empty all fields insplit_fields
andmanf_pn_field
are used.comment
: [string=''] A comment for documentation purposes.manf_field
: [string='manf'] Field for the manufacturer name.manf_pn_field
: [string='manf#'] Field for the manufacturer part number.modify_first_value
: [boolean=true] Modify even the value for the first component in the list (KiCost behavior).modify_value
: [boolean=true] Add '- p N/M' to the value.mult_separators
: [string=':'] Separators used for the multiplier. Each character in this string is a valid separator.multiplier
: [boolean=true] Enables the subpart multiplier mechanism.name
: [string=''] Used to identify this particular filter definition.ref_sep
: [string='#'] Separator used in the reference (i.e. R10#1).separators
: [string=';,'] Separators used between subparts. Each character in this string is a valid separator.split_fields
: [list(string)] List of fields to split, usually the distributors part numbers.split_fields_expand
: [boolean=false] Whentrue
the fields insplit_fields
are added to the internal names.use_ref_sep_for_first
: [boolean=true] Force the reference separator use even for the first component in the list (KiCost behavior).value_alt_field
: [string='value_subparts'] Field containing replacements for theValue
field. So we get real values for splitted parts.
- Valid keys:
- var_rename: Var_Rename
This filter implements the VARIANT:FIELD=VALUE renamer to get FIELD=VALUE when VARIANT is in use.
- Valid keys:
comment
: [string=''] A comment for documentation purposes.force_variant
: [string=''] Use this variant instead of the current variant. Usefull for IBoM variants.name
: [string=''] Used to identify this particular filter definition.separator
: [string=':'] Separator used between the variant and the field name.variant_to_value
: [boolean=false] Rename fields matching the variant to the value of the component.
- Valid keys:
- var_rename_kicost: Var_Rename_KiCost
This filter implements the kicost.VARIANT:FIELD=VALUE renamer to get FIELD=VALUE when VARIANT is in use.
It applies the KiCost concept of variants (a regex to match the VARIANT).
The internal
_var_rename_kicost
filter emulates the KiCost behavior.- Valid keys:
comment
: [string=''] A comment for documentation purposes.name
: [string=''] Used to identify this particular filter definition.prefix
: [string='kicost.'] A mandatory prefix. Is not case sensitive.separator
: [string=':'] Separator used between the variant and the field name.variant
: [string=''] Variant regex to match the VARIANT part. When empty the currently selected variant is used.variant_to_value
: [boolean=false] Rename fields matching the variant to the value of the component.
- Valid keys:
The tests/yaml_samples directory contains all the regression tests. Many of them test the filters functionality.
- int_bom_exclude_any.kibot.yaml: Shows how to use regular expressions to match fields and exclude components. Is the more powerful filter mechanism.
- int_bom_fil_1.kibot.yaml: Shows various mechanisms. In particular how to change the list of keywords, usually used to match 'DNF', meaning you can exclude components with arbitrary text.
- int_bom_fil_2.kibot.yaml: Shows how to use KiCad 5 module attributes (from the PCB) to filter SMD, THT and Virtual components. Note KiCad 6 is redefining the attributes.
- int_bom_include_only.kibot.yaml: Shows how to use regular expressions to match only some components, instead of including a few.
- int_bom_var_t2is_csv.kibot.yaml: Shows how to use filters and variants simultaneously, not a good idea, but possible.
- print_pdf_no_inductors_1.kibot.yaml: Shows how to change the
dnf_filter
for a KiBoM variant. - print_pdf_no_inductors_2.kibot.yaml: Shows how to do what
print_pdf_no_inductors_1.kibot.yaml
does but without the need of a variant.
- _mechanical is used to exclude:
- References that start with #
- Virtual components
- References that match: '^TP[0-9]*' or '^FID'
- Part names that match: 'regex': 'mount.*hole' or 'solder.*bridge' or 'solder.*jump' or 'test.*point'
- Footprints that match: 'test.*point' or 'mount.*hole' or 'fiducial'
- _kibom_dnf_Config it uses the internal
dnf_list
to exclude components with- Value matching any of the keys
- Any of the keys in the
Config
field (comma or space separated)
- _kibom_dnc_Config it uses the internal
dnc_list
to exclude components with- Value matching any of the keys
- Any of the keys in the
Config
field (comma or space separated)
Note that the last two uses a field named Config
, but you can customise them invoking _kibom_dnf_FIELD. This will create an equivalent filter, but using the indicated FIELD.
The current list of DNF keys is:
- dnf
- dnl
- dnp
- do not fit
- do not place
- do not load
- nofit
- nostuff
- noplace
- noload
- not fitted
- not loaded
- not placed
- no stuff
The current list of DNC keys is:
- dnc
- do not change
- no change
- fixed
You can define your own lists as the int_bom_fil_1.kibot.yaml
shows.
In this section you put all the things that you want to generate. This section contains one or more outputs. Each output contain the following data:
name
a name so you can easily identify it.comment
a short description of this output.type
selects which type of output will be generated. Examples are gerbers, drill files and pick & place filesdir
is the directory where this output will be stored.extends
used to use another output'soptions
as base.run_by_default
indicates this output will be created when no specific outputs are requested.disable_run_by_default
can be used to disable therun_by_default
status of other output.output_id
text to use for the %I expansion content.options
contains one or more options to configure this output.layers
a list of layers used for this output. Not all outputs needs this subsection.
Important note about the layers: In the original kiplot (from John Beard) the name of the inner layers was Inner.N where N is the number of the layer, i.e. Inner.1 is the first inner layer. This format is supported for compatibility. Note that this generated a lot of confusion because the default KiCad name for the first inner layer is In1.Cu. People filled issues and submitted pull-requests to fix it, thinking that inner layers weren't supported. Currently KiCad allows renaming these layers, so this version of kiplot supports the name used in KiCad. Just use the same name you see in the user interface.
The available values for type are:
- Plot formats:
gerber
the gerbers for fabrication.ps
postscript plothpgl
format for laser printerssvg
scalable vector graphicspdf
portable document formatdxf
mechanical CAD format
- Drill formats:
excellon
data for the drilling machinegerb_drill
drilling positions in a gerber file
- Pick & place
position
of the components for the pick & place machine
- Documentation
pdf_sch_print
schematic in PDF formatsvg_sch_print
schematic in SVG formatpdf_pcb_print
PDF file containing one or more layer and the page frame
- Bill of Materials
bom
The internal BoM generator.kibom
BoM in HTML or CSV format generated by KiBoMibom
Interactive HTML BoM generated by InteractiveHtmlBomkicost
BoM in XLSX format with costs generated by KiCost
- 3D model:
step
Standard for the Exchange of Product Data for the PCBrender_3d
PCB render, from the KiCad's 3D Viewer (broken in KiCad 6.0.0)
- Others:
boardview
creates a file useful to repair the board, but without disclosing the full layout.compress
creates an archive containing generated data.download_datasheets
downloads the datasheets for all the components.pcbdraw
nice images of the PCB in customized colors.qr_lib
generates symbol and footprints for QR codes.sch_variant
the schematic after applying all filters and variants, including crossed components.
Here is an example of a configuration file to generate the gerbers for the top and bottom layers:
kibot:
version: 1
preflight:
run_drc: true
outputs:
- name: 'gerbers'
comment: "Gerbers for the board house"
type: gerber
dir: gerberdir
options:
# generic layer options
exclude_edge_layer: false
exclude_pads_from_silkscreen: false
plot_sheet_reference: false
plot_footprint_refs: true
plot_footprint_values: true
force_plot_invisible_refs_vals: false
tent_vias: true
line_width: 0.15
# gerber options
use_aux_axis_as_origin: false
subtract_mask_from_silk: true
use_protel_extensions: false
gerber_precision: 4.5
create_gerber_job_file: true
use_gerber_x2_attributes: true
use_gerber_net_attributes: false
layers:
- 'F.Cu'
- 'B.Cu'
Most options are the same you'll find in the KiCad dialogs.
Outputs are generated in the order they are declared in the YAML file.
To create them in an arbitrary order use the --cli-order
command line option and they will be created in the order specified in the command line.
You have various ways to specify the layers. If you need to specify just one layer you can just use its name:
layers: 'F.Cu'
If you want to specify all the available layers:
layers: 'all'
You can also select the layers you want in KiCad (using File, Plot dialog) and save your PCB. Then you just need to use:
layers: 'selected'
You can also use any of the following grup of layers:
- copper all the copper layers
- technical all the technical layers (silk sreen, solder mask, paste, adhesive, etc.)
- user all the user layers (draw, comments, eco, margin, edge cuts, etc.)
You can also mix the above definitions using a list:
layers:
- 'copper'
- 'Dwgs.User'
This will select all the copper layers and the user drawings. Note that the above mentioned options will use file name suffixes and descriptions selected automatically. If you want to use a particular suffix and provide better descriptions you can use the following format:
layers:
- layer: 'F.Cu'
suffix: 'F_Cu'
description: 'Front copper'
- layer: 'B.Cu'
suffix: 'B_Cu'
description: 'Bottom copper'
You can also mix the styles:
layers:
- 'copper'
- layer: 'Cmts.User'
suffix: 'Cmts_User'
description: 'User comments'
- 'Dwgs.User'
If you need to use the same list of layers for various outputs you can use YAML anchors. The first time you define the list of layers just assign an anchor, here is an example:
layers: &copper_and_cmts
- copper
- 'Cmts.User'
Next time you need this list just use an alias, like this:
layers: *copper_and_cmts
-
BoardView
- Type:
boardview
- Description: Exports the PCB in board view format. This format allows simple pads and connections navigation, mainly for circuit debug. The output can be loaded using Open Board View (https://openboardview.org/)
- Valid keys:
-
comment
: [string=''] A comment for documentation purposes. -
dir
: [string='./'] Output directory for the generated files. If it starts with+
the rest is concatenated to the default dir. -
disable_run_by_default
: [string|boolean] Use it to disable therun_by_default
status of other output. Useful when this output extends another and you don't want to generate the original. Use the boolean true value to disable the output you are extending. -
extends
: [string=''] Copy theoptions
section from the indicated output. -
name
: [string=''] Used to identify this particular output definition. -
options
: [dict] Options for theboardview
output.- Valid keys:
-
output
: [string='%f-%i%v.%x'] Filename for the output (%i=boardview, %x=brd). Affected by global options.
-
- Valid keys:
-
output_id
: [string=''] Text to use for the %I expansion content. To differentiate variations of this output. -
run_by_default
: [boolean=true] When enabled this output will be created when no specific outputs are requested.
-
- Type:
-
BoM (Bill of Materials)
- Type:
bom
- Description: Used to generate the BoM in CSV, HTML, TSV, TXT, XML or XLSX format using the internal BoM.
Is compatible with KiBoM, but doesn't need to update the XML netlist because the components
are loaded from the schematic.
Important differences with KiBoM output:
- All options are in the main
options
section, not inconf
subsection. - TheComponent
column is namedRow
and works just like any other column. This output is what you get from the 'Tools/Generate Bill of Materials' menu in eeschema. - Valid keys:
-
comment
: [string=''] A comment for documentation purposes. -
dir
: [string='./'] Output directory for the generated files. If it starts with+
the rest is concatenated to the default dir. -
disable_run_by_default
: [string|boolean] Use it to disable therun_by_default
status of other output. Useful when this output extends another and you don't want to generate the original. Use the boolean true value to disable the output you are extending. -
extends
: [string=''] Copy theoptions
section from the indicated output. -
name
: [string=''] Used to identify this particular output definition. -
options
: [dict] Options for thebom
output.- Valid keys:
-
aggregate
: [list(dict)] Add components from other projects.- Valid keys:
-
file
: [string=''] Name of the schematic to aggregate. -
name
: [string=''] Name to identify this source. If empty we use the name of the schematic. -
number
: [number=1] Number of boards to build (components multiplier). Use negative to substract. -
ref_id
: [string=''] A prefix to add to all the references from this project.
-
- Valid keys:
-
columns
: [list(dict)|list(string)] List of columns to display. Can be just the name of the field.- Valid keys:
-
comment
: [string=''] Used as explanation for this column. The XLSX output uses it. -
field
: [string=''] Name of the field to use for this column. -
join
: [list(dict)|list(string)|string=''] List of fields to join to this column.- Valid keys:
-
field
: [string=''] Name of the field. -
text
: [string=''] Text to use instead of a field. This option is incompatible with thefield
option. Any space to separate it should be added in the text. Use \n for newline and \t for tab. -
text_after
: [string=''] Text to add after the field content. Will be added only if the field isn't empty. Any space to separate it should be added in the text. Use \n for newline and \t for tab. -
text_before
: [string=''] Text to add before the field content. Will be added only if the field isn't empty. Any space to separate it should be added in the text. Use \n for newline and \t for tab.
-
- Valid keys:
-
level
: [number=0] Used to group columns. The XLSX output uses it to collapse columns. -
name
: [string=''] Name to display in the header. The field is used when empty.
-
- Valid keys:
-
component_aliases
: [list(list(string))] A series of values which are considered to be equivalent for the part name. Each entry is a list of equivalen names. Example: ['c', 'c_small', 'cap' ] will ensure the equivalent capacitor symbols can be grouped together. If empty the following aliases are used: - ['r', 'r_small', 'res', 'resistor'] - ['l', 'l_small', 'inductor'] - ['c', 'c_small', 'cap', 'capacitor'] - ['sw', 'switch'] - ['zener', 'zenersmall'] - ['d', 'diode', 'd_small']. -
cost_extra_columns
: [list(dict)|list(string)] List of columns to add to the global section of the cost. Can be just the name of the field.- Valid keys:
-
comment
: [string=''] Used as explanation for this column. The XLSX output uses it. -
field
: [string=''] Name of the field to use for this column. -
join
: [list(dict)|list(string)|string=''] List of fields to join to this column.- Valid keys:
-
field
: [string=''] Name of the field. -
text
: [string=''] Text to use instead of a field. This option is incompatible with thefield
option. Any space to separate it should be added in the text. Use \n for newline and \t for tab. -
text_after
: [string=''] Text to add after the field content. Will be added only if the field isn't empty. Any space to separate it should be added in the text. Use \n for newline and \t for tab. -
text_before
: [string=''] Text to add before the field content. Will be added only if the field isn't empty. Any space to separate it should be added in the text. Use \n for newline and \t for tab.
-
- Valid keys:
-
level
: [number=0] Used to group columns. The XLSX output uses it to collapse columns. -
name
: [string=''] Name to display in the header. The field is used when empty.
-
- Valid keys:
-
count_smd_tht
: [boolean=false] Show the stats about how many of the components are SMD/THT. You must provide the PCB. -
csv
: [dict] Options for the CSV, TXT and TSV formats.- Valid keys:
-
hide_pcb_info
: [boolean=false] Hide project information. -
hide_stats_info
: [boolean=false] Hide statistics information. -
quote_all
: [boolean=false] Enclose all values using double quotes. -
separator
: [string=','] CSV Separator. TXT and TSV always use tab as delimiter.
-
- Valid keys:
-
distributors
: [string|list(string)] Include this distributors list. Default is all the available. -
dnc_filter
: [string|list(string)='_kibom_dnc'] Name of the filter to mark components as 'Do Not Change'. The default filter marks components with a DNC value or DNC in the Config field. -
dnf_filter
: [string|list(string)='_kibom_dnf'] Name of the filter to mark components as 'Do Not Fit'. The default filter marks components with a DNF value or DNF in the Config field. -
exclude_filter
: [string|list(string)='_mechanical'] Name of the filter to exclude components from BoM processing. The default filter excludes test points, fiducial marks, mounting holes, etc. -
fit_field
: [string='Config'] Field name used for internal filters. -
format
: [string=''] [HTML,CSV,TXT,TSV,XML,XLSX] format for the BoM. Defaults to CSV or a guess according to the options.. -
group_connectors
: [boolean=true] Connectors with the same footprints will be grouped together, independent of the name of the connector. -
group_fields
: [list(string)] List of fields used for sorting individual components into groups. Components which match (comparing all fields) will be grouped together. Field names are case-insensitive. If empty: ['Part', 'Part Lib', 'Value', 'Footprint', 'Footprint Lib', 'Voltage', 'Tolerance', 'Current', 'Power'] is used. -
group_fields_fallbacks
: [list(string)] List of fields to be used when the fields ingroup_fields
are empty. The first field in this list is the fallback for the first ingroup_fields
, and so on. -
html
: [dict] Options for the HTML format.- Valid keys:
-
col_colors
: [boolean=true] Use colors to show the field type. -
datasheet_as_link
: [string=''] Column with links to the datasheet. -
digikey_link
: [string|list(string)=''] Column/s containing Digi-Key part numbers, will be linked to web page. -
generate_dnf
: [boolean=true] Generate a separated section for DNF (Do Not Fit) components. -
hide_pcb_info
: [boolean=false] Hide project information. -
hide_stats_info
: [boolean=false] Hide statistics information. -
highlight_empty
: [boolean=true] Use a color for empty cells. Applies only whencol_colors
istrue
. -
logo
: [string|boolean=''] PNG file to use as logo, use false to remove. -
style
: [string='modern-blue'] Page style. Internal styles: modern-blue, modern-green, modern-red and classic. Or you can provide a CSS file name. Please use .css as file extension.. -
title
: [string='KiBot Bill of Materials'] BoM title.
-
- Valid keys:
-
ignore_dnf
: [boolean=true] Exclude DNF (Do Not Fit) components. -
int_qtys
: [boolean=true] Component quantities are always expressed as integers. Using the ceil() function. -
merge_blank_fields
: [boolean=true] Component groups with blank fields will be merged into the most compatible group, where possible. -
merge_both_blank
: [boolean=true] When creating groups two components with empty/missing field will be interpreted as with the same value. -
no_conflict
: [list(string)] List of fields where we tolerate conflicts. Use it to avoid undesired warnings. By default the field indicated infit_field
, the field used for variants and the fieldpart
are excluded. -
no_distributors
: [string|list(string)] Exclude this distributors list. They are removed after computingdistributors
. -
normalize_locale
: [boolean=false] When normalizing values use the locale decimal point. -
normalize_values
: [boolean=false] Try to normalize the R, L and C values, producing uniform units and prefixes. -
number
: [number=1] Number of boards to build (components multiplier). -
output
: [string='%f-%i%v.%x'] filename for the output (%i=bom). Affected by global options. -
ref_id
: [string=''] A prefix to add to all the references from this project. Used for multiple projects. -
ref_separator
: [string=' '] Separator used for the list of references. -
source_by_id
: [boolean=false] Generate theSource BoM
column using the reference ID instead of the project name. -
use_alt
: [boolean=false] Print grouped references in the alternate compressed style eg: R1-R7,R18. -
variant
: [string=''] Board variant, used to determine which components are output to the BoM.. -
xlsx
: [dict] Options for the XLSX format.- Valid keys:
-
col_colors
: [boolean=true] Use colors to show the field type. -
datasheet_as_link
: [string=''] Column with links to the datasheet. -
digikey_link
: [string|list(string)=''] Column/s containing Digi-Key part numbers, will be linked to web page. -
generate_dnf
: [boolean=true] Generate a separated section for DNF (Do Not Fit) components. -
hide_pcb_info
: [boolean=false] Hide project information. -
hide_stats_info
: [boolean=false] Hide statistics information. -
highlight_empty
: [boolean=true] Use a color for empty cells. Applies only whencol_colors
istrue
. -
kicost
: [boolean=false] Enable KiCost worksheet creation. -
logo
: [string|boolean=''] PNG file to use as logo, use false to remove. -
logo_scale
: [number=2] Scaling factor for the logo. Note that this value isn't honored by all spreadsheet software. -
max_col_width
: [number=60] [20,999] Maximum column width (characters). -
style
: [string='modern-blue'] Head style: modern-blue, modern-green, modern-red and classic. -
title
: [string='KiBot Bill of Materials'] BoM title.
-
- Valid keys:
-
- Valid keys:
-
output_id
: [string=''] Text to use for the %I expansion content. To differentiate variations of this output. -
run_by_default
: [boolean=true] When enabled this output will be created when no specific outputs are requested.
-
- Type:
-
Archiver (files compressor)
- Type:
compress
- Description: Generates a compressed file containing output files. This is used to generate groups of files in compressed file format.
- Valid keys:
-
comment
: [string=''] A comment for documentation purposes. -
dir
: [string='./'] Output directory for the generated files. If it starts with+
the rest is concatenated to the default dir. -
disable_run_by_default
: [string|boolean] Use it to disable therun_by_default
status of other output. Useful when this output extends another and you don't want to generate the original. Use the boolean true value to disable the output you are extending. -
extends
: [string=''] Copy theoptions
section from the indicated output. -
name
: [string=''] Used to identify this particular output definition. -
options
: [dict] Options for thecompress
output.- Valid keys:
-
compression
: [string='auto'] [auto,stored,deflated,bzip2,lzma] Compression algorithm. Use auto to let KiBot select a suitable one. -
files
: [list(dict)] Which files will be included.- Valid keys:
-
dest
: [string=''] Destination directory inside the archive, empty means the same of the file. -
filter
: [string='.*'] A regular expression that source files must match. -
from_cwd
: [boolean=false] Use the current working directory instead of the dir specified by-d
. -
from_output
: [string=''] Collect files from the selected output. When used thesource
option is ignored. -
source
: [string='*'] File names to add, wildcards allowed. Use ** for recursive match. By default this pattern is applied to the output dir specified with-d
command line option. See thefrom_cwd
option.
-
- Valid keys:
-
format
: [string='ZIP'] [ZIP,TAR,RAR] Output file format. -
output
: [string='%f-%i%v.%x'] Name for the generated archive (%i=name of the output %x=according to format). Affected by global options.
-
- Valid keys:
-
output_id
: [string=''] Text to use for the %I expansion content. To differentiate variations of this output. -
run_by_default
: [boolean=true] When enabled this output will be created when no specific outputs are requested.
-
- Type:
-
Datasheets downloader
- Type:
download_datasheets
- Description: Downloads the datasheets for the project
- Valid keys:
-
comment
: [string=''] A comment for documentation purposes. -
dir
: [string='./'] Output directory for the generated files. If it starts with+
the rest is concatenated to the default dir. -
disable_run_by_default
: [string|boolean] Use it to disable therun_by_default
status of other output. Useful when this output extends another and you don't want to generate the original. Use the boolean true value to disable the output you are extending. -
extends
: [string=''] Copy theoptions
section from the indicated output. -
name
: [string=''] Used to identify this particular output definition. -
options
: [dict] Options for thedownload_datasheets
output.- Valid keys:
-
dnf
: [boolean=false] Include the DNF components. -
dnf_filter
: [string|list(string)='_none'] Name of the filter to mark components as not fitted. A short-cut to use for simple cases where a variant is an overkill. -
field
: [string='Datasheet'] Name of the field containing the URL. -
link_repeated
: [boolean=true] Instead of download things we already downloaded use symlinks. -
output
: [string='${VALUE}.pdf'] Name used for the downloaded datasheet. ${FIELD} will be replaced by the FIELD content. -
repeated
: [boolean=false] Download URLs that we already downloaded. It only makes sense if theoutput
field makes their output different. -
variant
: [string=''] Board variant to apply.
-
- Valid keys:
-
output_id
: [string=''] Text to use for the %I expansion content. To differentiate variations of this output. -
run_by_default
: [boolean=true] When enabled this output will be created when no specific outputs are requested.
-
- Type:
-
DXF (Drawing Exchange Format)
- Type:
dxf
- Description: Exports the PCB to 2D mechanical EDA tools (like AutoCAD). This output is what you get from the File/Plot menu in pcbnew.
- Valid keys:
-
comment
: [string=''] A comment for documentation purposes. -
dir
: [string='./'] Output directory for the generated files. If it starts with+
the rest is concatenated to the default dir. -
disable_run_by_default
: [string|boolean] Use it to disable therun_by_default
status of other output. Useful when this output extends another and you don't want to generate the original. Use the boolean true value to disable the output you are extending. -
extends
: [string=''] Copy theoptions
section from the indicated output. -
layers
: [list(dict)|list(string)|string] [all,selected,copper,technical,user] List of PCB layers to plot.- Valid keys:
-
description
: [string=''] A description for the layer, for documentation purposes. -
layer
: [string=''] Name of the layer. As you see it in KiCad. -
suffix
: [string=''] Suffix used in file names related to this layer. Derived from the name if not specified.
-
- Valid keys:
-
name
: [string=''] Used to identify this particular output definition. -
options
: [dict] Options for thedxf
output.- Valid keys:
-
custom_reports
: [list(dict)] A list of customized reports for the manufacturer.- Valid keys:
-
content
: [string=''] Content for the report. Use${basename} for the project name without extension. Use $ {filename(LAYER)} for the file corresponding to LAYER. -
output
: [string='Custom_report.txt'] File name for the custom report.
-
- Valid keys:
-
dnf_filter
: [string|list(string)='_none'] Name of the filter to mark components as not fitted. A short-cut to use for simple cases where a variant is an overkill. -
drill_marks
: [string='full'] what to use to indicate the drill places, can be none, small or full (for real scale). -
edge_cut_extension
: [string=''] Used to configure the edge cuts layer extension for Protel mode. Include the dot. -
exclude_edge_layer
: [boolean=true] Do not include the PCB edge layer. -
exclude_pads_from_silkscreen
: [boolean=false] Do not plot the component pads in the silk screen (KiCad 5.x only). -
force_plot_invisible_refs_vals
: [boolean=false] Include references and values even when they are marked as invisible. -
inner_extension_pattern
: [string=''] Used to change the Protel style extensions for inner layers. The replacement pattern can contain %n for the inner layer number and %N for the layer number. Example '.g%n'. -
metric_units
: [boolean=false] Use mm instead of inches. -
output
: [string='%f-%i%v.%x'] Output file name, the default KiCad name if empty. Affected by global options. -
plot_footprint_refs
: [boolean=true] Include the footprint references. -
plot_footprint_values
: [boolean=true] Include the footprint values. -
plot_sheet_reference
: [boolean=false] Currently without effect. -
polygon_mode
: [boolean=true] Plot using the contour, instead of the center line. -
sketch_plot
: [boolean=false] Don't fill objects, just draw the outline. -
tent_vias
: [boolean=true] Cover the vias. -
uppercase_extensions
: [boolean=false] Use uppercase names for the extensions. -
use_aux_axis_as_origin
: [boolean=false] Use the auxiliary axis as origin for coordinates. -
variant
: [string=''] Board variant to apply.
-
- Valid keys:
-
output_id
: [string=''] Text to use for the %I expansion content. To differentiate variations of this output. -
run_by_default
: [boolean=true] When enabled this output will be created when no specific outputs are requested.
-
- Type:
-
Excellon drill format
- Type:
excellon
- Description: This is the main format for the drilling machine. You can create a map file for documentation purposes. This output is what you get from the 'File/Fabrication output/Drill Files' menu in pcbnew.
- Valid keys:
-
comment
: [string=''] A comment for documentation purposes. -
dir
: [string='./'] Output directory for the generated files. If it starts with+
the rest is concatenated to the default dir. -
disable_run_by_default
: [string|boolean] Use it to disable therun_by_default
status of other output. Useful when this output extends another and you don't want to generate the original. Use the boolean true value to disable the output you are extending. -
extends
: [string=''] Copy theoptions
section from the indicated output. -
name
: [string=''] Used to identify this particular output definition. -
options
: [dict] Options for theexcellon
output.- Valid keys:
-
left_digits
: [number=0] number of digits for integer part of coordinates (0 is auto). -
map
: [dict|string] [hpgl,ps,gerber,dxf,svg,pdf] Format for a graphical drill map. Not generated unless a format is specified.- Valid keys:
-
output
: [string='%f-%i%v.%x'] Name for the map file, KiCad defaults if empty (%i='PTH_drill_map'). Affected by global options. -
type
: [string='pdf'] [hpgl,ps,gerber,dxf,svg,pdf] Format for a graphical drill map.
-
- Valid keys:
-
metric_units
: [boolean=true] Use metric units instead of inches. -
minimal_header
: [boolean=false] Use a minimal header in the file. -
mirror_y_axis
: [boolean=false] Invert the Y axis. -
npth_id
: [string] Force this replacement for %i when generating NPTH files. -
output
: [string='%f-%i%v.%x'] name for the drill file, KiCad defaults if empty (%i='PTH_drill'). Affected by global options. -
pth_and_npth_single_file
: [boolean=true] Generate one file for both, plated holes and non-plated holes, instead of two separated files. -
pth_id
: [string] Force this replacement for %i when generating PTH and unified files. -
report
: [dict|string] Name of the drill report. Not generated unless a name is specified.- Valid keys:
-
filename
: [string=''] Name of the drill report. Not generated unless a name is specified. (%i='drill_report' %x='txt').
-
- Valid keys:
-
right_digits
: [number=0] number of digits for mantissa part of coordinates (0 is auto). -
route_mode_for_oval_holes
: [boolean=true] Use route command for oval holes (G00), otherwise use G85. -
use_aux_axis_as_origin
: [boolean=false] Use the auxiliary axis as origin for coordinates. -
zeros_format
: [string='DECIMAL_FORMAT'] [DECIMAL_FORMAT,SUPPRESS_LEADING,SUPPRESS_TRAILING,KEEP_ZEROS] How to handle the zeros.
-
- Valid keys:
-
output_id
: [string=''] Text to use for the %I expansion content. To differentiate variations of this output. -
run_by_default
: [boolean=true] When enabled this output will be created when no specific outputs are requested.
-
- Type:
-
Gerber drill format
- Type:
gerb_drill
- Description: This is the information for the drilling machine in gerber format. You can create a map file for documentation purposes. This output is what you get from the 'File/Fabrication output/Drill Files' menu in pcbnew.
- Valid keys:
-
comment
: [string=''] A comment for documentation purposes. -
dir
: [string='./'] Output directory for the generated files. If it starts with+
the rest is concatenated to the default dir. -
disable_run_by_default
: [string|boolean] Use it to disable therun_by_default
status of other output. Useful when this output extends another and you don't want to generate the original. Use the boolean true value to disable the output you are extending. -
extends
: [string=''] Copy theoptions
section from the indicated output. -
name
: [string=''] Used to identify this particular output definition. -
options
: [dict] Options for thegerb_drill
output.- Valid keys:
-
map
: [dict|string] [hpgl,ps,gerber,dxf,svg,pdf] Format for a graphical drill map. Not generated unless a format is specified.- Valid keys:
-
output
: [string='%f-%i%v.%x'] Name for the map file, KiCad defaults if empty (%i='PTH_drill_map'). Affected by global options. -
type
: [string='pdf'] [hpgl,ps,gerber,dxf,svg,pdf] Format for a graphical drill map.
-
- Valid keys:
-
npth_id
: [string] Force this replacement for %i when generating NPTH files. -
output
: [string='%f-%i%v.%x'] name for the drill file, KiCad defaults if empty (%i='PTH_drill'). Affected by global options. -
pth_id
: [string] Force this replacement for %i when generating PTH and unified files. -
report
: [dict|string] Name of the drill report. Not generated unless a name is specified.- Valid keys:
-
filename
: [string=''] Name of the drill report. Not generated unless a name is specified. (%i='drill_report' %x='txt').
-
- Valid keys:
-
use_aux_axis_as_origin
: [boolean=false] Use the auxiliary axis as origin for coordinates.
-
- Valid keys:
-
output_id
: [string=''] Text to use for the %I expansion content. To differentiate variations of this output. -
run_by_default
: [boolean=true] When enabled this output will be created when no specific outputs are requested.
-
- Type:
-
Gerber format
- Type:
gerber
- Description: This is the main fabrication format for the PCB. This output is what you get from the File/Plot menu in pcbnew.
- Valid keys:
-
comment
: [string=''] A comment for documentation purposes. -
dir
: [string='./'] Output directory for the generated files. If it starts with+
the rest is concatenated to the default dir. -
disable_run_by_default
: [string|boolean] Use it to disable therun_by_default
status of other output. Useful when this output extends another and you don't want to generate the original. Use the boolean true value to disable the output you are extending. -
extends
: [string=''] Copy theoptions
section from the indicated output. -
layers
: [list(dict)|list(string)|string] [all,selected,copper,technical,user] List of PCB layers to plot.- Valid keys:
-
description
: [string=''] A description for the layer, for documentation purposes. -
layer
: [string=''] Name of the layer. As you see it in KiCad. -
suffix
: [string=''] Suffix used in file names related to this layer. Derived from the name if not specified.
-
- Valid keys:
-
name
: [string=''] Used to identify this particular output definition. -
options
: [dict] Options for thegerber
output.- Valid keys:
-
create_gerber_job_file
: [boolean=true] Creates a file with information about all the generated gerbers. You can use it in gerbview to load all gerbers at once. -
custom_reports
: [list(dict)] A list of customized reports for the manufacturer.- Valid keys:
-
content
: [string=''] Content for the report. Use${basename} for the project name without extension. Use $ {filename(LAYER)} for the file corresponding to LAYER. -
output
: [string='Custom_report.txt'] File name for the custom report.
-
- Valid keys:
-
disable_aperture_macros
: [boolean=false] Disable aperture macros (workaround for buggy CAM software) (KiCad 6). -
dnf_filter
: [string|list(string)='_none'] Name of the filter to mark components as not fitted. A short-cut to use for simple cases where a variant is an overkill. -
edge_cut_extension
: [string=''] Used to configure the edge cuts layer extension for Protel mode. Include the dot. -
exclude_edge_layer
: [boolean=true] Do not include the PCB edge layer. -
exclude_pads_from_silkscreen
: [boolean=false] Do not plot the component pads in the silk screen (KiCad 5.x only). -
force_plot_invisible_refs_vals
: [boolean=false] Include references and values even when they are marked as invisible. -
gerber_job_file
: [string='%f-%i%v.%x'] Name for the gerber job file (%i='job', %x='gbrjob'). Affected by global options. -
gerber_precision
: [number=4.6] This the gerber coordinate format, can be 4.5 or 4.6. -
inner_extension_pattern
: [string=''] Used to change the Protel style extensions for inner layers. The replacement pattern can contain %n for the inner layer number and %N for the layer number. Example '.g%n'. -
line_width
: [number=0.1] [0.02,2] Line_width for objects without width [mm] (KiCad 5). -
output
: [string='%f-%i%v.%x'] Output file name, the default KiCad name if empty. Affected by global options. -
plot_footprint_refs
: [boolean=true] Include the footprint references. -
plot_footprint_values
: [boolean=true] Include the footprint values. -
plot_sheet_reference
: [boolean=false] Currently without effect. -
subtract_mask_from_silk
: [boolean=false] Substract the solder mask from the silk screen. -
tent_vias
: [boolean=true] Cover the vias. -
uppercase_extensions
: [boolean=false] Use uppercase names for the extensions. -
use_aux_axis_as_origin
: [boolean=false] Use the auxiliary axis as origin for coordinates. -
use_gerber_net_attributes
: [boolean=true] Include netlist metadata. -
use_gerber_x2_attributes
: [boolean=true] Use the extended X2 format (otherwise use X1 formerly RS-274X). -
use_protel_extensions
: [boolean=false] Use legacy Protel file extensions. -
variant
: [string=''] Board variant to apply.
-
- Valid keys:
-
output_id
: [string=''] Text to use for the %I expansion content. To differentiate variations of this output. -
run_by_default
: [boolean=true] When enabled this output will be created when no specific outputs are requested.
-
- Type:
-
HPGL (Hewlett & Packard Graphics Language)
- Type:
hpgl
- Description: Exports the PCB for plotters and laser printers. This output is what you get from the File/Plot menu in pcbnew.
- Valid keys:
-
comment
: [string=''] A comment for documentation purposes. -
dir
: [string='./'] Output directory for the generated files. If it starts with+
the rest is concatenated to the default dir. -
disable_run_by_default
: [string|boolean] Use it to disable therun_by_default
status of other output. Useful when this output extends another and you don't want to generate the original. Use the boolean true value to disable the output you are extending. -
extends
: [string=''] Copy theoptions
section from the indicated output. -
layers
: [list(dict)|list(string)|string] [all,selected,copper,technical,user] List of PCB layers to plot.- Valid keys:
-
description
: [string=''] A description for the layer, for documentation purposes. -
layer
: [string=''] Name of the layer. As you see it in KiCad. -
suffix
: [string=''] Suffix used in file names related to this layer. Derived from the name if not specified.
-
- Valid keys:
-
name
: [string=''] Used to identify this particular output definition. -
options
: [dict] Options for thehpgl
output.- Valid keys:
-
custom_reports
: [list(dict)] A list of customized reports for the manufacturer.- Valid keys:
-
content
: [string=''] Content for the report. Use${basename} for the project name without extension. Use $ {filename(LAYER)} for the file corresponding to LAYER. -
output
: [string='Custom_report.txt'] File name for the custom report.
-
- Valid keys:
-
dnf_filter
: [string|list(string)='_none'] Name of the filter to mark components as not fitted. A short-cut to use for simple cases where a variant is an overkill. -
drill_marks
: [string='full'] what to use to indicate the drill places, can be none, small or full (for real scale). -
edge_cut_extension
: [string=''] Used to configure the edge cuts layer extension for Protel mode. Include the dot. -
exclude_edge_layer
: [boolean=true] Do not include the PCB edge layer. -
exclude_pads_from_silkscreen
: [boolean=false] Do not plot the component pads in the silk screen (KiCad 5.x only). -
force_plot_invisible_refs_vals
: [boolean=false] Include references and values even when they are marked as invisible. -
inner_extension_pattern
: [string=''] Used to change the Protel style extensions for inner layers. The replacement pattern can contain %n for the inner layer number and %N for the layer number. Example '.g%n'. -
mirror_plot
: [boolean=false] Plot mirrored. -
output
: [string='%f-%i%v.%x'] Output file name, the default KiCad name if empty. Affected by global options. -
pen_number
: [number=1] [1,16] Pen number. -
pen_speed
: [number=20] [1,99] Pen speed. -
pen_width
: [number=15] [0,100] Pen diameter in MILS, useful to fill areas. However, it is in mm in HPGL files. -
plot_footprint_refs
: [boolean=true] Include the footprint references. -
plot_footprint_values
: [boolean=true] Include the footprint values. -
plot_sheet_reference
: [boolean=false] Currently without effect. -
scaling
: [number=0] Scale factor (0 means autoscaling). -
sketch_plot
: [boolean=false] Don't fill objects, just draw the outline. -
tent_vias
: [boolean=true] Cover the vias. -
uppercase_extensions
: [boolean=false] Use uppercase names for the extensions. -
variant
: [string=''] Board variant to apply.
-
- Valid keys:
-
output_id
: [string=''] Text to use for the %I expansion content. To differentiate variations of this output. -
run_by_default
: [boolean=true] When enabled this output will be created when no specific outputs are requested.
-
- Type:
-
IBoM (Interactive HTML BoM)
- Type:
ibom
- Description: Generates an interactive web page useful to identify the position of the components in the PCB. For more information: https://github.com/INTI-CMNB/InteractiveHtmlBom This output is what you get from the InteractiveHtmlBom plug-in (pcbnew).
- Valid keys:
-
comment
: [string=''] A comment for documentation purposes. -
dir
: [string='./'] Output directory for the generated files. If it starts with+
the rest is concatenated to the default dir. -
disable_run_by_default
: [string|boolean] Use it to disable therun_by_default
status of other output. Useful when this output extends another and you don't want to generate the original. Use the boolean true value to disable the output you are extending. -
extends
: [string=''] Copy theoptions
section from the indicated output. -
name
: [string=''] Used to identify this particular output definition. -
options
: [dict] Options for theibom
output.- Valid keys:
-
blacklist
: [string=''] List of comma separated blacklisted components or prefixes with . E.g. 'X1,MH'. IBoM option, avoid using in conjunction with KiBot variants/filters. -
blacklist_empty_val
: [boolean=false] Blacklist components with empty value. IBoM option, avoid using in conjunction with KiBot variants/filters. -
board_rotation
: [number=0] Board rotation in degrees (-180 to 180). Will be rounded to multiple of 5. -
bom_view
: [string='left-right'] [bom-only,left-right,top-bottom] Default BOM view. -
checkboxes
: [string='Sourced,Placed'] Comma separated list of checkbox columns. -
dark_mode
: [boolean=false] Default to dark mode. -
dnf_filter
: [string|list(string)='_none'] Name of the filter to mark components as not fitted. A short-cut to use for simple cases where a variant is an overkill. Avoid using it in conjunction with with IBoM native filtering options. -
dnp_field
: [string=''] Name of the extra field that indicates do not populate status. Components with this field not empty will be blacklisted. IBoM option, avoid using in conjunction with KiBot variants/filters. -
extra_data_file
: [string=''] Path to netlist or xml file. You can use '%F.xml' to avoid specifying the project name. Leave it blank for most uses, data will be extracted from the PCB. -
extra_fields
: [string=''] Comma separated list of extra fields to pull from netlist or xml file. Using 'X,Y' is a shortcut forshow_fields
andgroup_fields
with values 'Value,Footprint,X,Y'. -
group_fields
: [string=''] Comma separated list of fields that components will be grouped by. Value and Footprint are used when nothing is specified. -
hide_pads
: [boolean=false] Hide footprint pads by default. -
hide_silkscreen
: [boolean=false] Hide silkscreen by default. -
highlight_pin1
: [boolean=false] Highlight pin1 by default. -
include_nets
: [boolean=false] Include netlist information in output.. -
include_tracks
: [boolean=false] Include track/zone information in output. F.Cu and B.Cu layers only. -
layer_view
: [string='FB'] [F,FB,B] Default layer view. -
name_format
: [string='ibom'] Output file name format supports substitutions: %f : original pcb file name without extension. %p : pcb/project title from pcb metadata. %c : company from pcb metadata. %r : revision from pcb metadata. %d : pcb date from metadata if available, file modification date otherwise. %D : bom generation date. %T : bom generation time. Extension .html will be added automatically. Note that this name is used only when output is ''. - netlist_file: Alias for extra_data_file.
-
no_blacklist_virtual
: [boolean=false] Do not blacklist virtual components. IBoM option, avoid using in conjunction with KiBot variants/filters. -
no_compression
: [boolean=false] Disable compression of pcb data. -
no_redraw_on_drag
: [boolean=false] Do not redraw pcb on drag by default. -
normalize_field_case
: [boolean=false] Normalize extra field name case. E.g. 'MPN' and 'mpn' will be considered the same field. -
output
: [string='%f-%i%v.%x'] Filename for the output, use '' to use the IBoM filename (%i=ibom, %x=html). Affected by global options. -
show_fabrication
: [boolean=false] Show fabrication layer by default. -
show_fields
: [string=''] Comma separated list of fields to show in the BOM. Value and Footprint are displayed when nothing is specified. -
sort_order
: [string='C,R,L,D,U,Y,X,F,SW,A,,HS,CNN,J,P,NT,MH'] Default sort order for components. Must contain '' once. -
variant
: [string=''] Board variant to apply. Avoid using it in conjunction with with IBoM native filtering options. -
variant_field
: [string=''] Name of the extra field that stores board variant for component. IBoM option, avoid using in conjunction with KiBot variants/filters. -
variants_blacklist
: [string=''] List of board variants to exclude from the BOM. IBoM option, avoid using in conjunction with KiBot variants/filters. -
variants_whitelist
: [string=''] List of board variants to include in the BOM. IBoM option, avoid using in conjunction with KiBot variants/filters.
-
- Valid keys:
-
output_id
: [string=''] Text to use for the %I expansion content. To differentiate variations of this output. -
run_by_default
: [boolean=true] When enabled this output will be created when no specific outputs are requested.
-
- Type:
-
KiBoM (KiCad Bill of Materials)
- Type:
kibom
- Description: Used to generate the BoM in HTML or CSV format using the KiBoM plug-in.
For more information: https://github.com/INTI-CMNB/KiBoM
Note that this output is provided as a compatibility tool.
We recommend using the
bom
output instead. This output is what you get from the 'Tools/Generate Bill of Materials' menu in eeschema. - Valid keys:
-
comment
: [string=''] A comment for documentation purposes. -
dir
: [string='./'] Output directory for the generated files. If it starts with+
the rest is concatenated to the default dir. -
disable_run_by_default
: [string|boolean] Use it to disable therun_by_default
status of other output. Useful when this output extends another and you don't want to generate the original. Use the boolean true value to disable the output you are extending. -
extends
: [string=''] Copy theoptions
section from the indicated output. -
name
: [string=''] Used to identify this particular output definition. -
options
: [dict] Options for thekibom
output.- Valid keys:
-
conf
: [string|dict] BoM configuration file, relative to PCB. You can also define the configuration here, will be stored inconfig.kibom.ini
.- Valid keys:
-
columns
: [list(dict)|list(string)] List of columns to display. Can be just the name of the field.- Valid keys:
-
field
: [string=''] Name of the field to use for this column. -
join
: [list(string)|string=''] List of fields to join to this column. -
name
: [string=''] Name to display in the header. The field is used when empty.
-
- Valid keys:
-
component_aliases
: [list(list(string))] A series of values which are considered to be equivalent for the part name. Each entry is a list of equivalen names. Example: ['c', 'c_small', 'cap' ] will ensure the equivalent capacitor symbols can be grouped together. If empty the following aliases are used: - ['r', 'r_small', 'res', 'resistor'] - ['l', 'l_small', 'inductor'] - ['c', 'c_small', 'cap', 'capacitor'] - ['sw', 'switch'] - ['zener', 'zenersmall'] - ['d', 'diode', 'd_small']. -
datasheet_as_link
: [string=''] Column with links to the datasheet (HTML only). -
digikey_link
: [string|list(string)=''] Column/s containing Digi-Key part numbers, will be linked to web page (HTML only). -
exclude_any
: [list(dict)] A series of regular expressions used to exclude parts. If a component matches ANY of these, it will be excluded. Column names are case-insensitive. If empty the following list is used: - column: References regex: '^TP[0-9]*' - column: References regex: '^FID' - column: Part regex: 'mount.*hole' - column: Part regex: 'solder.*bridge' - column: Part regex: 'test.*point' - column: Footprint regex 'test.*point' - column: Footprint regex: 'mount.*hole' - column: Footprint regex: 'fiducial'.- Valid keys:
-
column
: [string=''] Name of the column to apply the regular expression. - field: Alias for column.
-
regex
: [string=''] Regular expression to match. - regexp: Alias for regex.
-
- Valid keys:
-
fit_field
: [string='Config'] Field name used to determine if a particular part is to be fitted (also DNC and variants). -
group_connectors
: [boolean=true] Connectors with the same footprints will be grouped together, independent of the name of the connector. -
group_fields
: [list(string)] List of fields used for sorting individual components into groups. Components which match (comparing all fields) will be grouped together. Field names are case-insensitive. If empty: ['Part', 'Part Lib', 'Value', 'Footprint', 'Footprint Lib'] is used. -
hide_headers
: [boolean=false] Hide column headers. -
hide_pcb_info
: [boolean=false] Hide project information. -
html_generate_dnf
: [boolean=true] Generate a separated section for DNF (Do Not Fit) components (HTML only). -
ignore_dnf
: [boolean=true] Exclude DNF (Do Not Fit) components. -
include_only
: [list(dict)] A series of regular expressions used to select included parts. If there are any regex defined here, only components that match against ANY of them will be included. Column names are case-insensitive. If empty all the components are included.- Valid keys:
-
column
: [string=''] Name of the column to apply the regular expression. - field: Alias for column.
-
regex
: [string=''] Regular expression to match. - regexp: Alias for regex.
-
- Valid keys:
-
merge_blank_fields
: [boolean=true] Component groups with blank fields will be merged into the most compatible group, where possible. -
number_rows
: [boolean=true] First column is the row number. -
ref_separator
: [string=' '] Separator used for the list of references. -
test_regex
: [boolean=true] Each component group will be tested against a number of regular-expressions (see ``).. -
use_alt
: [boolean=false] Print grouped references in the alternate compressed style eg: R1-R7,R18.
-
- Valid keys:
-
format
: [string='HTML'] [HTML,CSV,XML,XLSX] format for the BoM. -
number
: [number=1] Number of boards to build (components multiplier). -
output
: [string='%f-%i%v.%x'] filename for the output (%i=bom). Affected by global options. -
separator
: [string=','] CSV Separator. -
variant
: [string=''] Board variant(s), used to determine which components are output to the BoM. To specify multiple variants, with a BOM file exported for each variant, separate variants with the ';' (semicolon) character. This isn't related to the KiBot concept of variants.
-
- Valid keys:
-
output_id
: [string=''] Text to use for the %I expansion content. To differentiate variations of this output. -
run_by_default
: [boolean=true] When enabled this output will be created when no specific outputs are requested.
-
- Type:
-
KiCost (KiCad Cost calculator)
- Type:
kicost
- Description: Generates a spreadsheet containing components costs. For more information: https://github.com/INTI-CMNB/KiCost This output is what you get from the KiCost plug-in (eeschema).
- Valid keys:
-
comment
: [string=''] A comment for documentation purposes. -
dir
: [string='./'] Output directory for the generated files. If it starts with+
the rest is concatenated to the default dir. -
disable_run_by_default
: [string|boolean] Use it to disable therun_by_default
status of other output. Useful when this output extends another and you don't want to generate the original. Use the boolean true value to disable the output you are extending. -
extends
: [string=''] Copy theoptions
section from the indicated output. -
name
: [string=''] Used to identify this particular output definition. -
options
: [dict] Options for thekicost
output.- Valid keys:
-
aggregate
: [list(dict)] Add components from other projects.- Valid keys:
- board_qty: Alias for number.
-
file
: [string=''] Name of the XML to aggregate. -
number
: [number=100] Number of boards to build (components multiplier). -
variant
: [string=' '] Variant for this project.
- Valid keys:
- board_qty: Alias for number.
-
currency
: [string|list(string)=USD] Currency priority. Use ISO4217 codes (i.e. USD, EUR). -
distributors
: [string|list(string)] Include this distributors list. Default is all the available. -
dnf_filter
: [string|list(string)='_none'] Name of the filter to mark components as not fitted. A short-cut to use for simple cases where a variant is an overkill. Don't use thekicost_variant
when using internal variants/filters. -
fields
: [string|list(string)] List of fields to be added to the global data section. -
group_fields
: [string|list(string)] List of fields that can be different for a group. Parts with differences in these fields are grouped together, but displayed individually. -
ignore_fields
: [string|list(string)] List of fields to be ignored. -
kicost_variant
: [string=''] Regular expression to match the variant field (KiCost option, not internal variants). -
no_collapse
: [boolean=false] Do not collapse the part references (collapse=R1-R4). -
no_distributors
: [string|list(string)] Exclude this distributors list. They are removed after computingdistributors
. -
no_price
: [boolean=false] Do not look for components price. For testing purposes. -
number
: [number=100] Number of boards to build (components multiplier). -
output
: [string='%f-%i%v.%x'] Filename for the output (%i=kicost, %x=xlsx). Affected by global options. -
show_cat_url
: [boolean=false] Include the catalogue links in the catalogue code. -
split_extra_fields
: [string|list(string)] Declare part fields to include in multipart split process. -
translate_fields
: [list(dict)] Fields to rename (KiCost option, not internal filters).- Valid keys:
-
field
: [string=''] Name of the field to rename. -
name
: [string=''] New name.
-
- Valid keys:
-
variant
: [string=''] Board variant to apply. Don't use thekicost_variant
when using internal variants/filters.
-
- Valid keys:
-
output_id
: [string=''] Text to use for the %I expansion content. To differentiate variations of this output. -
run_by_default
: [boolean=true] When enabled this output will be created when no specific outputs are requested.
-
- Type:
-
PcbDraw - Beautiful 2D PCB render
- Type:
pcbdraw
- Description: Exports the PCB as a 2D model (SVG, PNG or JPG). Uses configurable colors. Can also render the components if the 2D models are available
- Valid keys:
-
comment
: [string=''] A comment for documentation purposes. -
dir
: [string='./'] Output directory for the generated files. If it starts with+
the rest is concatenated to the default dir. -
disable_run_by_default
: [string|boolean] Use it to disable therun_by_default
status of other output. Useful when this output extends another and you don't want to generate the original. Use the boolean true value to disable the output you are extending. -
extends
: [string=''] Copy theoptions
section from the indicated output. -
name
: [string=''] Used to identify this particular output definition. -
options
: [dict] Options for thepcbdraw
output.- Valid keys:
-
bottom
: [boolean=false] Render the bottom side of the board (default is top side). -
dnf_filter
: [string|list(string)='_none'] Name of the filter to mark components as not fitted. A short-cut to use for simple cases where a variant is an overkill. -
dpi
: [number=300] [10,1200] Dots per inch (resolution) of the generated image. -
format
: [string='svg'] [svg,png,jpg] Output format. Only used if nooutput
is specified. -
highlight
: [list(string)=[]] List of components to highlight. -
libs
: [list(string)=[]] List of libraries. -
mirror
: [boolean=false] Mirror the board. -
no_drillholes
: [boolean=false] Do not make holes transparent. -
output
: [string='%f-%i%v.%x'] Name for the generated file. Affected by global options. -
placeholder
: [boolean=false] Show placeholder for missing components. -
remap
: [dict|None] Replacements for PCB references using components (lib:component). -
show_components
: [list(string)|string=none] [none,all] List of components to draw, can be also a string for none or all. The default is none. -
style
: [string|dict] PCB style (colors). An internal name, the name of a JSON file or the style options.- Valid keys:
-
board
: [string='#208b47'] color for the board without copper (covered by solder mask). -
clad
: [string='#cabb3e'] color for the PCB core (not covered by solder mask). -
copper
: [string='#285e3a'] color for the copper zones (covered by solder mask). -
highlight_on_top
: [boolean=false] highlight over the component (not under). -
highlight_padding
: [number=1.5] [0,1000] how much the highlight extends around the component [mm]. -
highlight_style
: [string='stroke:none;fill:#ff0000;opacity:0.5;'] SVG code for the highlight style. -
outline
: [string='#000000'] color for the outline. -
pads
: [string='#8b898c'] color for the exposed pads (metal finish). -
silk
: [string='#d5dce4'] color for the silk screen. -
vcut
: [string='#bf2600'] color for the V-CUTS.
-
- Valid keys:
-
variant
: [string=''] Board variant to apply. -
vcuts
: [boolean=false] Render V-CUTS on the Cmts.User layer. -
warnings
: [string='visible'] [visible,all,none] Using visible only the warnings about components in the visible side are generated.
-
- Valid keys:
-
output_id
: [string=''] Text to use for the %I expansion content. To differentiate variations of this output. -
run_by_default
: [boolean=true] When enabled this output will be created when no specific outputs are requested.
-
- Type:
-
PDF (Portable Document Format)
- Type:
pdf
- Description: Exports the PCB to the most common exhange format. Suitable for printing. Note that this output isn't the best for documating your project. This output is what you get from the File/Plot menu in pcbnew.
- Valid keys:
-
comment
: [string=''] A comment for documentation purposes. -
custom_reports
: [list(dict)] A list of customized reports for the manufacturer.- Valid keys:
-
content
: [string=''] Content for the report. Use${basename} for the project name without extension. Use $ {filename(LAYER)} for the file corresponding to LAYER. -
output
: [string='Custom_report.txt'] File name for the custom report.
-
- Valid keys:
-
dir
: [string='./'] Output directory for the generated files. If it starts with+
the rest is concatenated to the default dir. -
disable_run_by_default
: [string|boolean] Use it to disable therun_by_default
status of other output. Useful when this output extends another and you don't want to generate the original. Use the boolean true value to disable the output you are extending. -
dnf_filter
: [string|list(string)='_none'] Name of the filter to mark components as not fitted. A short-cut to use for simple cases where a variant is an overkill. -
drill_marks
: [string='full'] what to use to indicate the drill places, can be none, small or full (for real scale). -
edge_cut_extension
: [string=''] Used to configure the edge cuts layer extension for Protel mode. Include the dot. -
exclude_edge_layer
: [boolean=true] Do not include the PCB edge layer. -
exclude_pads_from_silkscreen
: [boolean=false] Do not plot the component pads in the silk screen (KiCad 5.x only). -
extends
: [string=''] Copy theoptions
section from the indicated output. -
force_plot_invisible_refs_vals
: [boolean=false] Include references and values even when they are marked as invisible. -
inner_extension_pattern
: [string=''] Used to change the Protel style extensions for inner layers. The replacement pattern can contain %n for the inner layer number and %N for the layer number. Example '.g%n'. -
layers
: [list(dict)|list(string)|string] [all,selected,copper,technical,user] List of PCB layers to plot.- Valid keys:
-
description
: [string=''] A description for the layer, for documentation purposes. -
layer
: [string=''] Name of the layer. As you see it in KiCad. -
suffix
: [string=''] Suffix used in file names related to this layer. Derived from the name if not specified.
-
- Valid keys:
-
name
: [string=''] Used to identify this particular output definition. -
options
: [dict] Options for thepdf
output.- Valid keys:
-
custom_reports
: [list(dict)] A list of customized reports for the manufacturer.- Valid keys:
-
content
: [string=''] Content for the report. Use${basename} for the project name without extension. Use $ {filename(LAYER)} for the file corresponding to LAYER. -
output
: [string='Custom_report.txt'] File name for the custom report.
-
- Valid keys:
-
dnf_filter
: [string|list(string)='_none'] Name of the filter to mark components as not fitted. A short-cut to use for simple cases where a variant is an overkill. -
drill_marks
: [string='full'] what to use to indicate the drill places, can be none, small or full (for real scale). -
edge_cut_extension
: [string=''] Used to configure the edge cuts layer extension for Protel mode. Include the dot. -
exclude_edge_layer
: [boolean=true] Do not include the PCB edge layer. -
exclude_pads_from_silkscreen
: [boolean=false] Do not plot the component pads in the silk screen (KiCad 5.x only). -
force_plot_invisible_refs_vals
: [boolean=false] Include references and values even when they are marked as invisible. -
inner_extension_pattern
: [string=''] Used to change the Protel style extensions for inner layers. The replacement pattern can contain %n for the inner layer number and %N for the layer number. Example '.g%n'. -
line_width
: [number=0.1] [0.02,2] For objects without width [mm] (KiCad 5). -
mirror_plot
: [boolean=false] Plot mirrored. -
negative_plot
: [boolean=false] Invert black and white. -
output
: [string='%f-%i%v.%x'] Output file name, the default KiCad name if empty. Affected by global options. -
plot_footprint_refs
: [boolean=true] Include the footprint references. -
plot_footprint_values
: [boolean=true] Include the footprint values. -
plot_sheet_reference
: [boolean=false] Currently without effect. -
tent_vias
: [boolean=true] Cover the vias. -
uppercase_extensions
: [boolean=false] Use uppercase names for the extensions. -
variant
: [string=''] Board variant to apply.
-
- Valid keys:
-
output
: [string='%f-%i%v.%x'] Output file name, the default KiCad name if empty. Affected by global options. -
output_id
: [string=''] Text to use for the %I expansion content. To differentiate variations of this output. -
plot_footprint_refs
: [boolean=true] Include the footprint references. -
plot_footprint_values
: [boolean=true] Include the footprint values. -
plot_sheet_reference
: [boolean=false] Currently without effect. -
run_by_default
: [boolean=true] When enabled this output will be created when no specific outputs are requested. -
tent_vias
: [boolean=true] Cover the vias. -
uppercase_extensions
: [boolean=false] Use uppercase names for the extensions. -
variant
: [string=''] Board variant to apply.
-
- Type:
-
PDF PCB Print (Portable Document Format)
- Type:
pdf_pcb_print
- Description: Exports the PCB to the most common exhange format. Suitable for printing. This is the main format to document your PCB. This output is what you get from the 'File/Print' menu in pcbnew.
- Valid keys:
-
comment
: [string=''] A comment for documentation purposes. -
dir
: [string='./'] Output directory for the generated files. If it starts with+
the rest is concatenated to the default dir. -
disable_run_by_default
: [string|boolean] Use it to disable therun_by_default
status of other output. Useful when this output extends another and you don't want to generate the original. Use the boolean true value to disable the output you are extending. -
extends
: [string=''] Copy theoptions
section from the indicated output. -
layers
: [list(dict)|list(string)|string] [all,selected,copper,technical,user] List of PCB layers to include in the PDF.- Valid keys:
-
description
: [string=''] A description for the layer, for documentation purposes. -
layer
: [string=''] Name of the layer. As you see it in KiCad. -
suffix
: [string=''] Suffix used in file names related to this layer. Derived from the name if not specified.
-
- Valid keys:
-
name
: [string=''] Used to identify this particular output definition. -
options
: [dict] Options for thepdf_pcb_print
output.- Valid keys:
-
dnf_filter
: [string|list(string)='_none'] Name of the filter to mark components as not fitted. A short-cut to use for simple cases where a variant is an overkill. -
drill_marks
: [string='full'] What to use to indicate the drill places, can be none, small or full (for real scale). -
force_edge_cuts
: [boolean=true] Only useful for KiCad 6 when printing in one page, you can disable the edge here. KiCad 5 forces it by default, and you can't control it from config files. Same for KiCad 6 when printing to separated pages. -
hide_excluded
: [boolean=false] Hide components in the Fab layer that are marked as excluded by a variant. -
mirror
: [boolean=false] Print mirrored (X axis inverted). ONLY for KiCad 6. -
monochrome
: [boolean=false] Print in black and white. -
output
: [string='%f-%i%v.%x'] Filename for the output PDF (%i=layers, %x=pdf). Affected by global options. - output_name: Alias for output.
-
plot_sheet_reference
: [boolean=true] Include the title-block. -
scaling
: [number=1.0] Scale factor (0 means autoscaling). -
separated
: [boolean=false] Print layers in separated pages. -
title
: [string=''] Text used to replace the sheet title. %VALUE expansions are allowed. If it starts with+
the text is concatenated. -
variant
: [string=''] Board variant to apply.
-
- Valid keys:
-
output_id
: [string=''] Text to use for the %I expansion content. To differentiate variations of this output. -
run_by_default
: [boolean=true] When enabled this output will be created when no specific outputs are requested.
-
- Type:
-
PDF Schematic Print (Portable Document Format)
- Type:
pdf_sch_print
- Description: Exports the PCB to the most common exhange format. Suitable for printing. This is the main format to document your schematic. This output is what you get from the 'File/Print' menu in eeschema.
- Valid keys:
-
comment
: [string=''] A comment for documentation purposes. -
dir
: [string='./'] Output directory for the generated files. If it starts with+
the rest is concatenated to the default dir. -
disable_run_by_default
: [string|boolean] Use it to disable therun_by_default
status of other output. Useful when this output extends another and you don't want to generate the original. Use the boolean true value to disable the output you are extending. -
extends
: [string=''] Copy theoptions
section from the indicated output. -
name
: [string=''] Used to identify this particular output definition. -
options
: [dict] Options for thepdf_sch_print
output.- Valid keys:
-
dnf_filter
: [string|list(string)='_none'] Name of the filter to mark components as not fitted. A short-cut to use for simple cases where a variant is an overkill. -
frame
: [boolean=true] Include the frame and title block. -
monochrome
: [boolean=false] Generate a monochromatic PDF. -
output
: [string='%f-%i%v.%x'] Filename for the output PDF (%i=schematic %x=pdf). Affected by global options. -
variant
: [string=''] Board variant to apply. Not fitted components are crossed.
-
- Valid keys:
-
output_id
: [string=''] Text to use for the %I expansion content. To differentiate variations of this output. -
run_by_default
: [boolean=true] When enabled this output will be created when no specific outputs are requested.
-
- Type:
-
Pick & place
- Type:
position
- Description: Generates the file with position information for the PCB components, used by the pick and place machine. This output is what you get from the 'File/Fabrication output/Footprint poistion (.pos) file' menu in pcbnew.
- Valid keys:
-
comment
: [string=''] A comment for documentation purposes. -
dir
: [string='./'] Output directory for the generated files. If it starts with+
the rest is concatenated to the default dir. -
disable_run_by_default
: [string|boolean] Use it to disable therun_by_default
status of other output. Useful when this output extends another and you don't want to generate the original. Use the boolean true value to disable the output you are extending. -
extends
: [string=''] Copy theoptions
section from the indicated output. -
name
: [string=''] Used to identify this particular output definition. -
options
: [dict] Options for theposition
output.- Valid keys:
-
bottom_negative_x
: [boolean=false] Use negative X coordinates for footprints on bottom layer. -
columns
: [list(dict)|list(string)] Which columns are included in the output.- Valid keys:
-
id
: [string=''] [Ref,Val,Package,PosX,PosY,Rot,Side] Internal name. -
name
: [string=''] Name to use in the outut file. The id is used when empty.
-
- Valid keys:
-
dnf_filter
: [string|list(string)='_none'] Name of the filter to mark components as not fitted. A short-cut to use for simple cases where a variant is an overkill. -
format
: [string='ASCII'] [ASCII,CSV] Format for the position file. -
include_virtual
: [boolean=false] Include virtual components. For special purposes, not pick & place. -
only_smd
: [boolean=true] Only include the surface mount components. -
output
: [string='%f-%i%v.%x'] Output file name (%i='top_pos'|'bottom_pos'|'both_pos', %x='pos'|'csv'). Affected by global options. -
separate_files_for_front_and_back
: [boolean=true] Generate two separated files, one for the top and another for the bottom. -
units
: [string='millimeters'] [millimeters,inches] Units used for the positions. -
use_aux_axis_as_origin
: [boolean=true] Use the auxiliary axis as origin for coordinates (KiCad default). -
variant
: [string=''] Board variant to apply.
-
- Valid keys:
-
output_id
: [string=''] Text to use for the %I expansion content. To differentiate variations of this output. -
run_by_default
: [boolean=true] When enabled this output will be created when no specific outputs are requested.
-
- Type:
-
PS (Postscript)
- Type:
ps
- Description: Exports the PCB to a format suitable for printing. This output is what you get from the File/Plot menu in pcbnew.
- Valid keys:
-
comment
: [string=''] A comment for documentation purposes. -
dir
: [string='./'] Output directory for the generated files. If it starts with+
the rest is concatenated to the default dir. -
disable_run_by_default
: [string|boolean] Use it to disable therun_by_default
status of other output. Useful when this output extends another and you don't want to generate the original. Use the boolean true value to disable the output you are extending. -
extends
: [string=''] Copy theoptions
section from the indicated output. -
layers
: [list(dict)|list(string)|string] [all,selected,copper,technical,user] List of PCB layers to plot.- Valid keys:
-
description
: [string=''] A description for the layer, for documentation purposes. -
layer
: [string=''] Name of the layer. As you see it in KiCad. -
suffix
: [string=''] Suffix used in file names related to this layer. Derived from the name if not specified.
-
- Valid keys:
-
name
: [string=''] Used to identify this particular output definition. -
options
: [dict] Options for theps
output.- Valid keys:
-
a4_output
: [boolean=true] force A4 paper size. -
custom_reports
: [list(dict)] A list of customized reports for the manufacturer.- Valid keys:
-
content
: [string=''] Content for the report. Use${basename} for the project name without extension. Use $ {filename(LAYER)} for the file corresponding to LAYER. -
output
: [string='Custom_report.txt'] File name for the custom report.
-
- Valid keys:
-
dnf_filter
: [string|list(string)='_none'] Name of the filter to mark components as not fitted. A short-cut to use for simple cases where a variant is an overkill. -
drill_marks
: [string='full'] what to use to indicate the drill places, can be none, small or full (for real scale). -
edge_cut_extension
: [string=''] Used to configure the edge cuts layer extension for Protel mode. Include the dot. -
exclude_edge_layer
: [boolean=true] Do not include the PCB edge layer. -
exclude_pads_from_silkscreen
: [boolean=false] Do not plot the component pads in the silk screen (KiCad 5.x only). -
force_plot_invisible_refs_vals
: [boolean=false] Include references and values even when they are marked as invisible. -
inner_extension_pattern
: [string=''] Used to change the Protel style extensions for inner layers. The replacement pattern can contain %n for the inner layer number and %N for the layer number. Example '.g%n'. -
line_width
: [number=0.15] [0.02,2] For objects without width [mm] (KiCad 5). -
mirror_plot
: [boolean=false] Plot mirrored. -
negative_plot
: [boolean=false] Invert black and white. -
output
: [string='%f-%i%v.%x'] Output file name, the default KiCad name if empty. Affected by global options. -
plot_footprint_refs
: [boolean=true] Include the footprint references. -
plot_footprint_values
: [boolean=true] Include the footprint values. -
plot_sheet_reference
: [boolean=false] Currently without effect. -
scale_adjust_x
: [number=1.0] Fine grain adjust for the X scale (floating point multiplier). -
scale_adjust_y
: [number=1.0] Fine grain adjust for the Y scale (floating point multiplier). -
scaling
: [number=1] Scale factor (0 means autoscaling). -
sketch_plot
: [boolean=false] Don't fill objects, just draw the outline. -
tent_vias
: [boolean=true] Cover the vias. -
uppercase_extensions
: [boolean=false] Use uppercase names for the extensions. -
variant
: [string=''] Board variant to apply. -
width_adjust
: [number=0] This width factor is intended to compensate PS printers/plotters that do not strictly obey line width settings. Only used to plot pads and tracks.
-
- Valid keys:
-
output_id
: [string=''] Text to use for the %I expansion content. To differentiate variations of this output. -
run_by_default
: [boolean=true] When enabled this output will be created when no specific outputs are requested.
-
- Type:
-
QR_Lib
- Type:
qr_lib
- Description: Generates a QR code symbol and footprint.
This output creates a library containing a symbol and footprint for a QR code.
To refresh the generated symbols and footprints use the
update_qr
preflight. The workflow is as follows: - Create the symbol and footprints using this output. - Use them in your schematic and PCB. - To keep them updated add theupdate_qr
preflight - Valid keys:
-
comment
: [string=''] A comment for documentation purposes. -
dir
: [string='./'] Output directory for the generated files. If it starts with+
the rest is concatenated to the default dir. -
disable_run_by_default
: [string|boolean] Use it to disable therun_by_default
status of other output. Useful when this output extends another and you don't want to generate the original. Use the boolean true value to disable the output you are extending. -
extends
: [string=''] Copy theoptions
section from the indicated output. -
name
: [string=''] Used to identify this particular output definition. -
options
: [dict] Options for theboardview
output.- Valid keys:
-
lib
: [string='QR'] Short name for the library. -
output
: [string='%f-%i%v.%x'] Filename for the output (%i=qr, %x=lib). Affected by global options. -
qrs
: [list(dict)] QR codes to include in the library.- Valid keys:
-
correction_level
: [string='low'] [low,medium,quartile,high] Error correction level. -
layer
: [string='silk'] [silk,copper] Layer for the footprint. -
name
: [string='QR'] Name for the symbol/footprint. -
pcb_negative
: [boolean=false] Generate a negative image for the PCB. -
size_pcb
: [number=15] Size of the QR footprint. -
size_sch
: [number=15] Size of the QR symbol. -
size_units
: [string='millimeters'] [millimeters,inches] Units used for the size. -
text
: [string='%p %r'] Text to encode as QR.
-
- Valid keys:
-
reference
: [string='QR'] The reference prefix. -
use_sch_dir
: [boolean=true] Generate the libs relative to the schematic/PCB dir.
-
- Valid keys:
-
output_id
: [string=''] Text to use for the %I expansion content. To differentiate variations of this output. -
run_by_default
: [boolean=true] When enabled this output will be created when no specific outputs are requested.
-
- Type:
-
3D render of the PCB
- Type:
render_3d
- Description: Exports the image generated by KiCad's 3D viewer.
- Valid keys:
-
comment
: [string=''] A comment for documentation purposes. -
dir
: [string='./'] Output directory for the generated files. If it starts with+
the rest is concatenated to the default dir. -
disable_run_by_default
: [string|boolean] Use it to disable therun_by_default
status of other output. Useful when this output extends another and you don't want to generate the original. Use the boolean true value to disable the output you are extending. -
extends
: [string=''] Copy theoptions
section from the indicated output. -
name
: [string=''] Used to identify this particular output definition. -
options
: [dict] Options for therender_3d
output.- Valid keys:
-
background1
: [string='#66667F'] First color for the background gradient. -
background2
: [string='#CCCCE5'] Second color for the background gradient. -
board
: [string='#332B16'] Color for the board without copper or solder mask. -
copper
: [string='#8b898c'] Color for the copper. -
dnf_filter
: [string|list(string)='_none'] Name of the filter to mark components as not fitted. A short-cut to use for simple cases where a variant is an overkill. -
download
: [boolean=true] Downloads missing 3D models from KiCad git. Only applies to models in KISYS3DMOD. -
height
: [number=720] Image height (aprox.). -
kicad_3d_url
: [string='https://gitlab.com/kicad/libraries/kicad-packages3D/-/raw/master/'] Base URL for the KiCad 3D models. -
move_x
: [number=0] Steps to move in the X axis, positive is to the right. Just like pressing the right arrow in the 3D viewer. -
move_y
: [number=0] Steps to move in the Y axis, positive is up. Just like pressing the up arrow in the 3D viewer. -
no_smd
: [boolean=false] Used to exclude 3D models for surface mount components. -
no_tht
: [boolean=false] Used to exclude 3D models for through hole components. -
no_virtual
: [boolean=false] Used to exclude 3D models for components with 'virtual' attribute. -
orthographic
: [boolean=false] Enable the orthographic projection mode (top view looks flat). -
output
: [string='%f-%i%v.%x'] Name for the generated image file (%i='3D_$VIEW' %x='png'). Affected by global options. -
ray_tracing
: [boolean=false] Enable the ray tracing. Much better result, but slow, and you'll need to adjustwait_rt
. -
silk
: [string='#d5dce4'] Color for the silk screen. -
solder_mask
: [string='#208b47'] Color for the solder mask. -
solder_paste
: [string='#808080'] Color for the solder paste. -
variant
: [string=''] Board variant to apply. -
view
: [string='top'] [top,bottom,front,rear,right,left,z,Z,y,Y,x,X] Point of view. -
wait_ray_tracing
: [number=-600] How many seconds we must wait before capturing the ray tracing render. Lamentably KiCad can save an unfinished image. Enlarge it if your image looks partially rendered. Use negative values to enable the auto-detect using CPU load. In this case the value is interpreted as a time-out.. -
width
: [number=1280] Image width (aprox.). -
zoom
: [number=0] Zoom steps. Use positive to enlarge, get closer, and negative to reduce. Same result as using the mouse wheel in the 3D viewer.
-
- Valid keys:
-
output_id
: [string=''] Text to use for the %I expansion content. To differentiate variations of this output. -
run_by_default
: [boolean=true] When enabled this output will be created when no specific outputs are requested.
-
- Type:
-
Schematic with variant generator
- Type:
sch_variant
- Description: Creates a copy of the schematic with all the filters and variants applied. This copy isn't intended for development. Is just a tweaked version of the original where you can look at the results.
- Valid keys:
-
comment
: [string=''] A comment for documentation purposes. -
dir
: [string='./'] Output directory for the generated files. If it starts with+
the rest is concatenated to the default dir. -
disable_run_by_default
: [string|boolean] Use it to disable therun_by_default
status of other output. Useful when this output extends another and you don't want to generate the original. Use the boolean true value to disable the output you are extending. -
extends
: [string=''] Copy theoptions
section from the indicated output. -
name
: [string=''] Used to identify this particular output definition. -
options
: [dict] Options for thesch_variant
output.- Valid keys:
-
dnf_filter
: [string|list(string)='_none'] Name of the filter to mark components as not fitted. A short-cut to use for simple cases where a variant is an overkill. -
variant
: [string=''] Board variant to apply.
-
- Valid keys:
-
output_id
: [string=''] Text to use for the %I expansion content. To differentiate variations of this output. -
run_by_default
: [boolean=true] When enabled this output will be created when no specific outputs are requested.
-
- Type:
-
STEP (ISO 10303-21 Clear Text Encoding of the Exchange Structure)
- Type:
step
- Description: Exports the PCB as a 3D model. This is the most common 3D format for exchange purposes. This output is what you get from the 'File/Export/STEP' menu in pcbnew.
- Valid keys:
-
comment
: [string=''] A comment for documentation purposes. -
dir
: [string='./'] Output directory for the generated files. If it starts with+
the rest is concatenated to the default dir. -
disable_run_by_default
: [string|boolean] Use it to disable therun_by_default
status of other output. Useful when this output extends another and you don't want to generate the original. Use the boolean true value to disable the output you are extending. -
extends
: [string=''] Copy theoptions
section from the indicated output. -
name
: [string=''] Used to identify this particular output definition. -
options
: [dict] Options for thestep
output.- Valid keys:
-
dnf_filter
: [string|list(string)='_none'] Name of the filter to mark components as not fitted. A short-cut to use for simple cases where a variant is an overkill. -
download
: [boolean=true] Downloads missing 3D models from KiCad git. Only applies to models in KISYS3DMOD. -
kicad_3d_url
: [string='https://gitlab.com/kicad/libraries/kicad-packages3D/-/raw/master/'] Base URL for the KiCad 3D models. -
metric_units
: [boolean=true] Use metric units instead of inches. -
min_distance
: [number=-1] The minimum distance between points to treat them as separate ones (-1 is KiCad default: 0.01 mm). -
no_virtual
: [boolean=false] Used to exclude 3D models for components with 'virtual' attribute. -
origin
: [string='grid'] Determines the coordinates origin. Using grid the coordinates are the same as you have in the design sheet. The drill option uses the auxiliary reference defined by the user. You can define any other origin using the format 'X,Y', i.e. '3.2,-10'. -
output
: [string='%f-%i%v.%x'] Name for the generated STEP file (%i='3D' %x='step'). Affected by global options. -
subst_models
: [boolean=true] Substitute STEP or IGS models with the same name in place of VRML models. -
variant
: [string=''] Board variant to apply.
-
- Valid keys:
-
output_id
: [string=''] Text to use for the %I expansion content. To differentiate variations of this output. -
run_by_default
: [boolean=true] When enabled this output will be created when no specific outputs are requested.
-
- Type:
-
SVG (Scalable Vector Graphics)
- Type:
svg
- Description: Exports the PCB to a format suitable for 2D graphics software. Unlike bitmaps SVG drawings can be scaled without losing resolution. This output is what you get from the File/Plot menu in pcbnew.
- Valid keys:
-
comment
: [string=''] A comment for documentation purposes. -
dir
: [string='./'] Output directory for the generated files. If it starts with+
the rest is concatenated to the default dir. -
disable_run_by_default
: [string|boolean] Use it to disable therun_by_default
status of other output. Useful when this output extends another and you don't want to generate the original. Use the boolean true value to disable the output you are extending. -
extends
: [string=''] Copy theoptions
section from the indicated output. -
layers
: [list(dict)|list(string)|string] [all,selected,copper,technical,user] List of PCB layers to plot.- Valid keys:
-
description
: [string=''] A description for the layer, for documentation purposes. -
layer
: [string=''] Name of the layer. As you see it in KiCad. -
suffix
: [string=''] Suffix used in file names related to this layer. Derived from the name if not specified.
-
- Valid keys:
-
name
: [string=''] Used to identify this particular output definition. -
options
: [dict] Options for thesvg
output.- Valid keys:
-
custom_reports
: [list(dict)] A list of customized reports for the manufacturer.- Valid keys:
-
content
: [string=''] Content for the report. Use${basename} for the project name without extension. Use $ {filename(LAYER)} for the file corresponding to LAYER. -
output
: [string='Custom_report.txt'] File name for the custom report.
-
- Valid keys:
-
dnf_filter
: [string|list(string)='_none'] Name of the filter to mark components as not fitted. A short-cut to use for simple cases where a variant is an overkill. -
drill_marks
: [string='full'] what to use to indicate the drill places, can be none, small or full (for real scale). -
edge_cut_extension
: [string=''] Used to configure the edge cuts layer extension for Protel mode. Include the dot. -
exclude_edge_layer
: [boolean=true] Do not include the PCB edge layer. -
exclude_pads_from_silkscreen
: [boolean=false] Do not plot the component pads in the silk screen (KiCad 5.x only). -
force_plot_invisible_refs_vals
: [boolean=false] Include references and values even when they are marked as invisible. -
inner_extension_pattern
: [string=''] Used to change the Protel style extensions for inner layers. The replacement pattern can contain %n for the inner layer number and %N for the layer number. Example '.g%n'. -
line_width
: [number=0.25] [0.02,2] For objects without width [mm] (KiCad 5). -
mirror_plot
: [boolean=false] Plot mirrored. -
negative_plot
: [boolean=false] Invert black and white. -
output
: [string='%f-%i%v.%x'] Output file name, the default KiCad name if empty. Affected by global options. -
plot_footprint_refs
: [boolean=true] Include the footprint references. -
plot_footprint_values
: [boolean=true] Include the footprint values. -
plot_sheet_reference
: [boolean=false] Currently without effect. -
tent_vias
: [boolean=true] Cover the vias. -
uppercase_extensions
: [boolean=false] Use uppercase names for the extensions. -
variant
: [string=''] Board variant to apply.
-
- Valid keys:
-
output_id
: [string=''] Text to use for the %I expansion content. To differentiate variations of this output. -
run_by_default
: [boolean=true] When enabled this output will be created when no specific outputs are requested.
-
- Type:
-
SVG Schematic Print
- Type:
svg_sch_print
- Description: Exports the PCB. Suitable for printing. This is a format to document your schematic.
- Valid keys:
-
comment
: [string=''] A comment for documentation purposes. -
dir
: [string='./'] Output directory for the generated files. If it starts with+
the rest is concatenated to the default dir. -
disable_run_by_default
: [string|boolean] Use it to disable therun_by_default
status of other output. Useful when this output extends another and you don't want to generate the original. Use the boolean true value to disable the output you are extending. -
extends
: [string=''] Copy theoptions
section from the indicated output. -
name
: [string=''] Used to identify this particular output definition. -
options
: [dict] Options for thesvg_sch_print
output.- Valid keys:
-
dnf_filter
: [string|list(string)='_none'] Name of the filter to mark components as not fitted. A short-cut to use for simple cases where a variant is an overkill. -
output
: [string='%f-%i%v.%x'] Filename for the output SVG (%i=schematic %x=svg). Affected by global options. -
variant
: [string=''] Board variant to apply. Not fitted components are crossed.
-
- Valid keys:
-
output_id
: [string=''] Text to use for the %I expansion content. To differentiate variations of this output. -
run_by_default
: [boolean=true] When enabled this output will be created when no specific outputs are requested.
-
- Type:
Some times your project is composed by various boards, other times you are producing various products at the same time. In both cases you would want to consolidate the components acquisition in one operation. Of course you can create individual BoMs for each project in CSV format and then consolidate them using a spreadsheet editor. But KiBot offers another option: you create a BoM for your main project and then aggregate the components from the other projects.
Here is a simple example. Suppose you have three projects: merge_1, merge_2 and merge_3. For the merge_1 project you could use the following output:
kibot:
version: 1
outputs:
- name: 'bom_csv'
comment: "Bill of Materials in CSV format"
type: bom
dir: BoM
options:
use_alt: true
Using the tests/board_samples/kicad_5/merge_1.sch
from the git repo and storing the above example in m1.kibot.yaml
you could run:
src/kibot -c m1.kibot.yaml -e tests/board_samples/kicad_5/merge_1.sch -d test_merge
And get test_merge/BoM/merge_1-bom.csv
:
Row | Description | Part | References | Value | Footprint | Quantity Per PCB | Status | Datasheet |
---|---|---|---|---|---|---|---|---|
1 | Unpolarized capacitor | C | C1 | 1nF | 1 | ~ | ||
2 | Unpolarized capacitor | C | C2 | 10nF | 1 | ~ | ||
3 | Resistor | R | R1-R3 | 1k | 3 | ~ |
Project info: | |
---|---|
Schematic: | merge_1 |
Variant: | default |
Revision: | |
Date: | 2021-02-02_12-12-27 |
KiCad Version: | 5.1.9-73d0e3b20d~88~ubuntu21.04.1 |
Statistics: | |
Component Groups: | 3 |
Component Count: | 5 |
Fitted Components: | 5 |
Number of PCBs: | 1 |
Total Components: | 5 |
This CSV says you have five components groped in three different types. They are one 1 nF capacitor, one 10 nF capacitor and three 1 k resistors. Now lets generate BoMs for the merge_2 example:
src/kibot -c m1.kibot.yaml -e tests/board_samples/kicad_5/merge_2.sch -d test_merge
We'll get test_merge/BoM/merge_2-bom.csv
:
Row | Description | Part | References | Value | Footprint | Quantity Per PCB | Status | Datasheet |
---|---|---|---|---|---|---|---|---|
1 | Unpolarized capacitor | C | C2 | 1nF | 1 | ~ | ||
2 | Unpolarized capacitor | C | C1 | 10nF | 1 | ~ | ||
3 | Resistor | R | R2-R4 | 1000 | 3 | ~ | ||
4 | Resistor | R | R1 | 10k | 1 | ~ |
Project info: | |
---|---|
Schematic: | merge_2 |
Variant: | default |
Revision: | |
Date: | 2021-01-27_10-19-46 |
KiCad Version: | 5.1.9-73d0e3b20d~88~ubuntu21.04.1 |
Statistics: | |
Component Groups: | 4 |
Component Count: | 6 |
Fitted Components: | 6 |
Number of PCBs: | 1 |
Total Components: | 6 |
In this project we have six components from four different types. They are similar to merge_1 but now we also have a 10 k resistor. We don't need to generate this BoM to consolidate our projects, but is good to know what we have. And now lets generate BoMs for the merge_3 example:
src/kibot -c m1.kibot.yaml -e tests/board_samples/kicad_5/merge_3.sch -d test_merge
We'll get test_merge/BoM/merge_3-bom.csv
:
Row | Description | Part | References | Value | Footprint | Quantity Per PCB | Status | Datasheet |
---|---|---|---|---|---|---|---|---|
1 | Resistor | R | R5 | 1k | 1 | ~ | ||
2 | Resistor | R | R1-R4 | 10k | 4 | ~ |
Project info: | |
---|---|
Schematic: | merge_3 |
Variant: | default |
Revision: | |
Date: | 2021-01-27_10-21-29 |
KiCad Version: | 5.1.9-73d0e3b20d~88~ubuntu21.04.1 |
Statistics: | |
Component Groups: | 2 |
Component Count: | 5 |
Fitted Components: | 5 |
Number of PCBs: | 1 |
Total Components: | 5 |
This time we also have five components, but from two different types. They are one 1 k resistor and four 10 k resistors. Now suppose we want to create 10 boards for merge_1, 20 for merge_2 and 30 for merge_3. We could use the following configuration:
kibot:
version: 1
outputs:
- name: 'bom_csv'
comment: "Bill of Materials in CSV format"
type: bom
dir: BoM
options:
use_alt: true
number: 10
aggregate:
- file: tests/board_samples/kicad_5/merge_2.sch
number: 20
- file: tests/board_samples/kicad_5/merge_3.sch
number: 30
Save it as m2.kibot.yaml
and run:
src/kibot -c m2.kibot.yaml -e tests/board_samples/kicad_5/merge_1.sch -d test_merge_consolidate
The test_merge_consolidate/BoM/merge_1-bom.csv
file will be generated containing:
Row | Description | Part | References | Value | Footprint | Quantity Per PCB | Build Quantity | Status | Datasheet | Source BoM |
---|---|---|---|---|---|---|---|---|---|---|
1 | Unpolarized capacitor | C | C1 C2 | 1nF | 2 | 30 | ~ | merge_1(1) merge_2(1) | ||
2 | Unpolarized capacitor | C | C2 C1 | 10nF | 2 | 30 | ~ | merge_1(1) merge_2(1) | ||
3 | Resistor | R | R1-R3 R2-R4 R5 | 1k | 7 | 120 | ~ | merge_1(3) merge_2(3) merge_3(1) | ||
4 | Resistor | R | R1 R1-R4 | 10k | 5 | 140 | ~ | merge_2(1) merge_3(4) |
Project info: | |
---|---|
Variant: | default |
KiCad Version: | 5.1.9-73d0e3b20d~88~ubuntu21.04.1 |
Global statistics: | |
Component Groups: | 4 |
Component Count: | 16 |
Fitted Components: | 16 |
Number of PCBs: | 60 |
Total Components: | 320 |
Project info: | merge_1 |
Schematic: | merge_1 |
Revision: | |
Date: | 2021-02-02_12-12-27 |
Company: | Test company |
Statistics: | merge_1 |
Component Groups: | 3 |
Component Count: | 5 |
Fitted Components: | 5 |
Number of PCBs: | 10 |
Total Components: | 50 |
Project info: | merge_2 |
Schematic: | merge_2 |
Revision: | |
Date: | 2021-01-27_10-19-46 |
Statistics: | merge_2 |
Component Groups: | 4 |
Component Count: | 6 |
Fitted Components: | 6 |
Number of PCBs: | 20 |
Total Components: | 120 |
Project info: | merge_3 |
Schematic: | merge_3 |
Revision: | |
Date: | 2021-01-27_10-21-29 |
Statistics: | merge_3 |
Component Groups: | 2 |
Component Count: | 5 |
Fitted Components: | 5 |
Number of PCBs: | 30 |
Total Components: | 150 |
You can see that now we have much more stats. They say we have four different types, thirteen for board sets, a total of 60 boards and 250 components. Then we have individual stats for each project. The capacitors are easy to interpret, we have 30 1 nF capacitors merge_1 project has one and merge_2 another. As we have 10 merge_1 and 20 merge_2 boards this is clear. But looking at the 1 k resistors is harder. We have 80, three from merge_1, one from merge_2 and another from merge_3. So we have 103+203+30=120, this is clear, but the BoM says they are R1-R3 R2-R4 R5, which is a little bit confusing. In this simple example is easy to correlate R1-R3 to merge_1, R2-R4 to merge_2 and R5 to merge_1. For bigger projects this gets harder. Lets assing an id to each project, we'll use 'A' for merge_1, 'B' for merge_2 and 'C' for merge_3:
kibot:
version: 1
outputs:
- name: 'bom_csv'
comment: "Bill of Materials in CSV format"
type: bom
dir: BoM
options:
use_alt: true
number: 10
ref_id: 'A:'
aggregate:
- file: tests/board_samples/kicad_5/merge_2.sch
number: 20
ref_id: 'B:'
- file: tests/board_samples/kicad_5/merge_3.sch
number: 30
ref_id: 'C:'
Now test_merge_consolidate/BoM/merge_1-bom.csv
will have the following information:
Row | Description | Part | References | Value | Footprint | Quantity Per PCB | Build Quantity | Status | Datasheet | Source BoM |
---|---|---|---|---|---|---|---|---|---|---|
1 | Unpolarized capacitor | C | A:C1 B:C2 | 1nF | 2 | 30 | ~ | merge_1(1) merge_2(1) | ||
2 | Unpolarized capacitor | C | A:C2 B:C1 | 10nF | 2 | 30 | ~ | merge_1(1) merge_2(1) | ||
3 | Resistor | R | A:R1-A:R3 B:R2-B:R4 C:R5 | 1k | 7 | 120 | ~ | merge_1(3) merge_2(3) merge_3(1) | ||
4 | Resistor | R | B:R1 C:R1-C:R4 | 10k | 5 | 140 | ~ | merge_2(1) merge_3(4) |
As you can see now we know A
has R1-R3, B
R2-R4 and for C
R5 is the 1k resistor.
If we want to compact the Source BoM
column we just need to enable the source_by_id
option:
kibot:
version: 1
outputs:
- name: 'bom_csv'
comment: "Bill of Materials in CSV format"
type: bom
dir: BoM
options:
use_alt: true
number: 10
ref_id: 'A:'
source_by_id: true
aggregate:
- file: tests/board_samples/kicad_5/merge_2.sch
number: 20
ref_id: 'B:'
- file: tests/board_samples/kicad_5/merge_3.sch
number: 30
ref_id: 'C:'
And we'll get:
Row | Description | Part | References | Value | Footprint | Quantity Per PCB | Build Quantity | Status | Datasheet | Source BoM |
---|---|---|---|---|---|---|---|---|---|---|
1 | Unpolarized capacitor | C | A:C1 B:C2 | 1nF | 2 | 30 | ~ | A:(1) B:(1) | ||
2 | Unpolarized capacitor | C | A:C2 B:C1 | 10nF | 2 | 30 | ~ | A:(1) B:(1) | ||
3 | Resistor | R | A:R1-A:R3 B:R2-B:R4 C:R5 | 1k | 7 | 120 | ~ | A:(3) B:(3) C:(1) | ||
4 | Resistor | R | B:R1 C:R1-C:R4 | 10k | 5 | 140 | ~ | B:(1) C:(4) |
In some cases you may want to reuse configuration files. An example of this are the example files that generate gerbers and drill files for various manufacturers (see).
In this case you can create a section named import
containing a list of configuration files. Here is an example:
import:
- configs/Elecrow.kibot.yaml
- configs/FusionPCB.kibot.yaml
- configs/JLCPCB.kibot.yaml
- configs/P-Ban.kibot.yaml
- configs/PCBWay.kibot.yaml
This will import all the outputs from the listed files.
If you need to define an output that is similar to another, and you want to avoid copying the options from the former, you can extend an output.
To achieve it just specify the name of the base output in the extends
value.
Note that this will use the options
of the other output as base, not other data as the comment.
Also note that you can use YAML anchors, but this won't work if you are importing the base output from other file.
Additionally you must be aware that extending an output doesn't disable the base output.
If you need to disable the original output use disable_run_by_default
option.
This is a more complex case of the previous Importing outputs from another file. In this case you must use the more general syntax:
import:
- file: FILE_CONTAINING_THE_YAML_DEFINITIONS
outputs: LIST_OF_OUTPUTS
filters: LIST_OF_FILTERS
variants: LIST_OF_VARIANTS
global: LIST_OF_GLOBALS
This syntax is flexible. If you don't define which outputs
, filters
, variants
and/or global
all will be imported. So you can just omit them, like this:
import:
- file: FILE_CONTAINING_THE_YAML_DEFINITIONS
The LIST_OF_items
can be a YAML list or just one string. Here is an example:
import:
- file: FILE_CONTAINING_THE_YAML_DEFINITIONS
outputs: one_name
filters: ['name1', 'name2']
This will import the one_name
output and the name1
and name2
filters. As variants
is omitted, all variants will be imported.
You can also use the all
and none
special names, like this:
import:
- file: FILE_CONTAINING_THE_YAML_DEFINITIONS
outputs: all
filters: all
variants: none
global: none
This will import all outputs and filters, but not variants or globals. Also note that imported globals has more precendence than the ones defined in the same file.
If you need a template for the configuration file try:
kibot --example
This will generate a file named example.kibot.yaml
containing all the available options and comments about them.
You can use it to create your own configuration file.
If you want to use the layers of a particular PCB in the example use:
kibot -b PCB_FILE --example
And if you want to use the same options selected in the plot dialog use:
kibot -b PCB_FILE -p --example
If the current directory contains only one PCB file and only one configuration file (named *.kibot.yaml) you can just call kibot
.
No arguments needed.
The tool will figure out which files to use.
If more than one file is found in the current directory kibot
will use the first found and issue a warning.
If you need to use other file just tell it explicitly:
kibot -b PCB_FILE.kicad_pcb -c CONFIG.kibot.yaml
A simple target can be added to your makefile
, so you can just run make pcb_files
or integrate into your current build process.
pcb_files:
kibot -b $(PCB) -c $(KIBOT_CFG)
If you need to supress messages use --quiet
or -q
and if you need to get more informatio about what's going on use --verbose
or -v
.
If you want to generate only some of the outputs use:
kibot OUTPUT_1 OUTPUT_2
If you want to generate all outputs with some exceptions use:
kibot --invert-sel OUTPUT_1 OUTPUT_2
Note that you can use the run_by_default
option of the output you want to exclude from the default runs.
If you want to skip the DRC and ERC use:
kibot --skip-pre run_erc,run_drc
If you want to skip all the preflight
tasks use:
kibot --skip-pre all
All outputs are generated using the current directory as base. If you want to use another directory as base use:
kibot --out-dir OTHER_PLACE
If you want to list the available outputs defined in the configuration file use:
kibot --list
KiBot: KiCad automation tool for documents generation
Usage:
kibot [-b BOARD] [-e SCHEMA] [-c CONFIG] [-d OUT_DIR] [-s PRE]
[-q | -v...] [-i] [-C] [-m MKFILE] [-g DEF]... [TARGET...]
kibot [-v...] [-b BOARD] [-e SCHEMA] [-c PLOT_CONFIG] --list
kibot [-v...] [-b BOARD] [-d OUT_DIR] [-p | -P] --example
kibot [-v...] --help-filters
kibot [-v...] --help-list-outputs
kibot [-v...] --help-output=HELP_OUTPUT
kibot [-v...] --help-outputs
kibot [-v...] --help-preflights
kibot -h | --help
kibot --version
Arguments:
TARGET Outputs to generate, default is all
Options:
-h, --help Show this help message and exit
-b BOARD, --board-file BOARD The PCB .kicad-pcb board file
-c CONFIG, --plot-config CONFIG The plotting config file to use
-C, --cli-order Generate outputs using the indicated order
-d OUT_DIR, --out-dir OUT_DIR The output directory [default: .]
-e SCHEMA, --schematic SCHEMA The schematic file (.sch)
-g DEF, --global-redef DEF Overwrite a global value (VAR=VAL)
--help-filters List supported filters and details
--help-list-outputs List supported outputs
--help-output HELP_OUTPUT Help for this particular output
--help-outputs List supported outputs and details
--help-preflights List supported preflights and details
-i, --invert-sel Generate the outputs not listed as targets
-l, --list List available outputs (in the config file)
-m MKFILE, --makefile MKFILE Generate a Makefile (no targets created)
-p, --copy-options Copy plot options from the PCB file
-P, --copy-and-expand As -p but expand the list of layers
-q, --quiet Remove information logs
-s PRE, --skip-pre PRE Skip preflights, comma separated or `all`
-v, --verbose Show debugging information
-V, --version Show program's version number and exit
-x, --example Create a template configuration file.
- For ERC, DRC, BoM XML update and PCB/SCH print install KiCad Automation Scripts
- BoM files (HTML/CSV/TSV/TXT/XML/XLSX) can be generated using the internal BoM generator or using KiBoM.
- For interactive BoM install InteractiveHtmlBom
- For SVG/PNG/JPG beauty PCB render PcbDraw. Also install the convert (from imagemagick) and rsvg-convert (from librsvg2-bin) tools.
- To create RAR files install the rar tool.
- The
distutils
module. This is part of Python, but on debian systems this is in a separated package:python3-distutils
Get the Debian package from the releases section and run:
sudo apt install ./kibot*_all.deb
Important note: Sometimes the release needs another packages that aren't part of the stable Debian distribution. In this case the packages are also included in the release page. As an example version 0.6.0 needs:
sudo apt install ./python3-mcpy_2.0.2-1_all.deb ./kibot_0.6.0-1_all.deb
pip install --no-compile kibot
Note that pip
has the dubious idea of compiling everything it downloads.
There is no advantage in doing it and it interferes with the mcpy
macros.
If you are installing at system level I recommend generating the compilation caches after installing.
As root
just run:
kibot --help-outputs > /dev/null
Note that pip
will automatically install all the needed Python dependencies.
But it won't install other interesting dependencies.
In particular you should take a look at the KiCad Automation Scripts dependencies.
If you have a Debian based OS I strongly recommend trying to use the .deb
packages for all the tools.
If you try to use a Python virtual environment you'll need to find a way to make the KiCad module (pcbnew
) available on it.
I don't know how to make it.
- Install KiCad 5.1.6 or newer
- Install Python 3.5 or newer
- Install the Python Yaml and requests modules
- Run the script src/kibot
When using a GitHub or GitLab repo you can use KiBot to generate all the needed stuff each time you commit a change to the schematic and/or PCB file.
Examples of how to do it can be found here for GitHub and here for GitLab.
In order to run KiBot on these environments you need a lot of software installed. The usual mechanism to achieve this is using docker. Docker images containing KiBot, all the supporting scripts and a corresponding KiCad can be found at Docker Hub as setsoft/kicad_auto:latest. This image is based on setsoft/kicad_debian:latest, containing KiCad on Debian GNU/Linux.
If you need to run the current development version of KiBot you can use the following docker image: setsoft/kicad_auto:dev.
For more information about the docker images visit kicad_debian and kicad_auto.
You need to put a config.kibot.yaml file into the KiCad project folder.
Here is an example of workflow file using the GitHub Action:
name: example
on:
push:
paths:
- '**.sch'
- '**.kicad_pcb'
pull_request:
paths:
- '**.sch'
- '**.kicad_pcb'
jobs:
example:
runs-on: ubuntu-latest
steps:
- uses: actions/checkout@v2
- uses: INTI-CMNB/KiBot@v1
with:
# Required - kibot config file
config: config.kibot.yaml
# optional - prefix to output defined in config
dir: output
# optional - schematic file
schema: '*.sch'
# optional - PCB design file
board: '*.kicad_pcb'
- name: upload results
uses: actions/upload-artifact@v2
with:
name: output
path: output
A working example applied to a repo can be found here.
I found this topic poorly documented and quite complex. So here is what I know, feel free to send me any corrections. Note that this is a very dynamic topic and this text was written in november 2020.
The gerber format is controlled by Ucamco, a leading manufacturer of equipment and software for PCB fabrication. Even when this isn't an open standard they release the spec for free and interact with Jean-Pierre Charras (father of KiCad). So KiCad support for gerber format is really updated.
The gerber format evolved with time, here are the versions I know:
- RS-274D obsolete version of the format.
- RS-274X (aka X1) this is the extended version of the format. Is the most widely supported, but has some limitations.
- X2 this is the format currently recommended by Ucamco and the default for modern KiCad versions. This extension adds important meta-data to the files. It helps CAM operators to know what's every drawing in the image. So you know which are pads, tracks, etc. And also more interesting information: impedance controlled tracks, the role of each file, etc. Using X2 you can know what is each file without the need of special names or file extensions. KiCad can generate drill files using X2.
- X3 this is the current draft. One interesting addition is the Components role. These files replaces the position files, adding important information about the footprint.
In addition to them is the spec for the Gerber Job file. This file was introduced between X2 and X3, and is used to group all the gerber files. The gbrjob file contains all the missing stack-up information.
KiCad 5 can generate X1, X2 and gerber job files, including drill information in gerber format. KiCad 5.99 (6.0 pre-release) can also generate X3 files (position files in gerber format).
As you can see the idea of Ucamco is to unify all fabrication information in one format.
The X2 format was designed in a way that software that fully implement X1 can just ignore the added meta-data. In an ideal world you shouldn't bother about it and generate X2 files. Just use the gbr file extension and a gbrjob file. The problem is with poorly implemented CAM tools. In particular CAM350, used by various important cheap China manufacturers. This software has known issues interpretating aperture macros and some X2 data. If your manufacturer has problems with your files check the following:
- Put gerber, drill and position files in the same directory.
- Disable X2 extensions (
use_gerber_x2_attributes
set tofalse
) - Use arcaic role mechanism (
use_protel_extensions
set totrue
) - Disable aperture macros (KiCad 6 only:
disable_aperture_macros
set totrue
)
The kicad-gerberzipper is an action plugin for KiCad oriented to help to generate gerber and drill files for some manufacturers.
I adapted the configurations from kicad-gerberzipper to KiBot configurations, you can find them in the docs/samples/
directory.
They include support for:
Position files are quite simple. You can generate them as plain text (ASCII) or as a spreadsheet (CSV).
But some conventions can make them tricky. Some manufacturers, like JLCPCB, uses conventions that are incompatible with KiCad.
The following blog explains how to adapt the position files generated by KiCad to what JLCPCB needs. To achieve it the author uses a script called JLCKicadTools.
You can achieve the same using KiBot. Here is a configuration example that generates the BoM and position files in the same way JLCKicadTools does:
kibot:
version: 1
filters:
- name: only_jlc_parts
comment: 'Only parts with JLC code'
type: generic
include_only:
- column: 'LCSC#'
regex: '^C\d+'
variants:
- name: rotated
comment: 'Just a place holder for the rotation filter'
type: kibom
variant: rotated
pre_transform: _rot_footprint
outputs:
- name: 'position'
comment: "Pick and place file, JLC style"
type: position
options:
variant: rotated
output: '%f_cpl_jlc.%x'
format: CSV
units: millimeters
separate_files_for_front_and_back: false
only_smd: true
columns:
- id: Ref
name: Designator
- Val
- Package
- id: PosX
name: "Mid X"
- id: PosY
name: "Mid Y"
- id: Rot
name: Rotation
- id: Side
name: Layer
- name: 'bom'
comment: "BoM for JLC"
type: bom
options:
output: '%f_%i_jlc.%x'
exclude_filter: 'only_jlc_parts'
ref_separator: ','
columns:
- field: Value
name: Comment
- field: References
name: Designator
- Footprint
- field: 'LCSC#'
name: 'LCSC Part #'
csv:
hide_pcb_info: true
hide_stats_info: true
quote_all: true
The only_jlc_parts
filter is used to generate the BoM and assumes you put the JLC component code in a field named LCSC#
(JLC uses LCSC as supplier).
Note that the author of the blog simply used Field4
for this and his script searches for any field containing the ^C\d+
pattern.
I think this isn't a good idea and I suggest using a defined name, like in this example.
The rotated
variant is used only to apply the _rot_footprint
transformation filter. This filter is an internal filter of type rot_footprint
.
Here is the same configuration file making explicit use of the rotation filter:
kibot:
version: 1
filters:
- name: fix_rotation
comment: 'Adjust rotation for JLC'
type: rot_footprint
- name: only_jlc_parts
comment: 'Only parts with JLC code'
type: generic
include_only:
- column: 'LCSC#'
regex: '^C\d+'
variants:
- name: rotated
comment: 'Just a place holder for the rotation filter'
type: kibom
variant: rotated
pre_transform: fix_rotation
outputs:
- name: 'position'
comment: "Pick and place file, JLC style"
type: position
options:
variant: rotated
output: '%f_cpl_jlc.%x'
format: CSV
units: millimeters
separate_files_for_front_and_back: false
only_smd: true
columns:
- id: Ref
name: Designator
- Val
- Package
- id: PosX
name: "Mid X"
- id: PosY
name: "Mid Y"
- id: Rot
name: Rotation
- id: Side
name: Layer
- name: 'bom'
comment: "BoM for JLC"
type: bom
options:
output: '%f_%i_jlc.%x'
exclude_filter: 'only_jlc_parts'
ref_separator: ','
columns:
- field: Value
name: Comment
- field: References
name: Designator
- Footprint
- field: 'LCSC#'
name: 'LCSC Part #'
csv:
hide_pcb_info: true
hide_stats_info: true
quote_all: true
As you can see we now create a filter named fix_rotation
of type rot_footprint
:
- name: fix_rotation
comment: 'Adjust rotation for JLC'
type: rot_footprint
Using it, instead of the internal filter named _rot_footprint
, is the same here. But you can then customize the filter.
The filter supports the following options:
extend
: [boolean=true] Extends the internal list of rotations with the one provided. Otherwise just use the provided list.negative_bottom
: [boolean=true] Rotation for bottom components is computed via subtraction as(component rot - angle)
. Note that this should be coherent with thebottom_negative_x
of the position output.invert_bottom
: [boolean=false] Rotation for bottom components is negated, resulting in either:(- component rot - angle)
or when combined withnegative_bottom
,(angle - component rot)
.rotations
: [list(list(string))] A list of pairs regular expression/rotation. Components matching the regular expression will be rotated the indicated angle. Special names_top
and_bottom
will match all components on that side of the board.
In order to add a new rotation or just change an existing one you just need to use the rotations
option.
As an example: the internal list of rotations rotates QFN packages by 270 degrees, no suppose you want to rotate them just 90 degrees.
The filter will look like this:
- name: fix_rotation
comment: 'Adjust rotation for JLC'
type: rot_footprint
rotations:
- ["^QFN-", 90.0]
This regular expression will match any footprint starting with QFN-
and rotate it 90 degrees.
The internal list of rotations is:
Footprint | Rotation |
---|---|
^Bosch_LGA-8_2x2.5mm_P0.65mm_ClockwisePinNumbering |
90.0 |
^R_Array_Convex_ |
90.0 |
^R_Array_Concave_ |
90.0 |
^SOT-223 |
180.0 |
^SOT-23 |
180.0 |
^TSOT-23 |
180.0 |
^SOT-353 |
180.0 |
^QFN- |
270.0 |
^LQFP- |
270.0 |
^TQFP- |
270.0 |
^SOP-(?!18_) |
270.0 |
^TSSOP- |
270.0 |
^DFN- |
270.0 |
^SOIC- |
270.0 |
^VSSOP-10_ |
270.0 |
^CP_EIA-3216-18_ |
180.0 |
^CP_EIA-3528-15_AVX-H |
180.0 |
^CP_EIA-3528-21_Kemet-B |
180.0 |
^CP_Elec_8x10.5 |
180.0 |
^CP_Elec_6.3x7.7 |
180.0 |
^CP_Elec_8x6.7 |
180.0 |
^CP_Elec_8x10 |
180.0 |
^(.*?_|V)?QFN-(16|20|24|28|40)(-|_|$) |
270.0 |
^PowerPAK_SO-8_Single |
270.0 |
^HTSSOP-28-1EP_4.4x9.7mm* |
270.0 |
- KiBot project: Salvador E. Tropea (@set-soft)
- Original KiPlot project: John Beard (@johnbeard)
- Original KiCad Automation Scripts: Scott Bezek, Productize SPRL
- KiBoM: Oliver Henry Walters (@SchrodingersGat)
- Interactive HTML BoM: @qu1ck
- PcbDraw: Jan Mrázek (@yaqwsx)
- KiCost: Dave Vandenbout (@devbisme) and Hildo Guillardi Júnior (@hildogjr)
- KiCAD to Boardview exporter: @whitequark
- S-expression parser: Takafumi Arakaki
- Python macros: Juha Jeronen (@Technologicat)
- Contributors:
- Error filters ideas: Leandro Heck (@leoheck)
- GitHub Actions Integration/SVG output: @nerdyscout
- Plug-in loader fix: Stavros Korokithakis (@skorokithakis)
- SCH loader fix: @Sabolik
- SCH library loader fix: Bernhard B. (@bbernhard)
- GitHub Actions fix: @TheSlowGrowth
- Easier README navigation: Robin Vobruba (@hoijui)
- Typos corrections: Seth Kaz (@sethkaz) and Sebastian Grau (@SebastianGrau)
- Sources of inspiration and good ideas:
- JLC Kicad Tools: Matthew Lai (@matthewlai)
- KiCad Gerber Zipper: @g200kg
- pimpmykicadbom: Anton Savov (@antto)
- Others:
- Robot in the logo: Christian Plaza (from pixabay)