This is the source code repository for showerloop NG, an updated version of showerloop which is girlfriend/wife approved.
The idea is simple and comes from the original showerloop project: collect, clean and reuse the hot water from your shower that normally flows down the drain.
- 06/08/2018: Documentation update - savings added
- 01/08/2018: PoC working! Updated documentation
- 19/07/2018: First release of software with MQTT and OTA update support
- 16/07/2018: first release on github
- 08/05/2018: Finished major hardware
- Using water flow sensors on both the cold and hot water supply, we see whether somebody is showering
- If water flow is detected, we wait until the hot water is warm enough using a temperature sensor
- If the hot water supply is hot enough, we close the drain valve
- Once there is enough water collected (detected using a water level sensor):
- the water pump starts and builds pressure
- a UVC lamp starts to kill viruses and bacterias
- the cold water supply valve closes
- the recuperation water supply opens
- You can enjoy a really nice, warm and long shower. Thanks to the use of a thermostatic shower valve, only a bit of warm water is used to keep the water temperature constant. The two water level sensors keep the water level constant and open the drain valve a bit, if needed.
- Once you stop your shower (this is again detected by the water flow sensors), the following happens:
- the water pump stops
- the uvc lamp switches off
- the drain valve opens
- the recuperation water valve closes
- the cold water valve opens
- It publish stats (water consumption, water reuse, ...) about your shower to an MQTT broker of your choice
- And everything is ready for your next shower!
So, now is a good time to see whether this project will save me/you some money. Apparently the average person takes a showser of 8.2 mins and I wanted to calculate how much water/energy is taken by a normal shower to vaidate the idea. I took some pictures of my water and gas meter before and after a shower which I timed on 8.2 minutes.
Usage | Average price (2018) | Price / shower | |
---|---|---|---|
Water | 54 l | 0.0043 €/l | 0.2322 € |
Gas | 0.1258 m3 | 0.65 €/m3 | 0.0818 € |
Total | 0.3134 € |
So, we pay 0.3134 € per shower for 1 person. If we say a family exists out of 4 persons and that each family member on average showers every 2 days, this results in:
4*(365/2)*0.3134=228.78 €/year
Next step: measure savings with showerloop.
Sources:
- Average water price
- Average gas price
- Normal shower water usage: before shower and after shower
- Normal shower gas usage: before shower and after shower
- This is a work in progress, there will probably still be some bugs in the software
- You are combining 220V with water. If you're not experienced in electricity and plumbing, please stop now
- The hardware items may not be final
- I do not take any responsibility whatsoever when you try to build this yourself
Here is a video showing a working prototype of showerloop
- PVC Tubing
- DN40 Electric Motorized PVC Water Valve
- DN20 Electric Motorized Brass Water Valve x 2
- Hall-based Water Flow Sensor x 2
- Contactless Liquid Water Level Sensor x 2
- Water Filter
- UVC Sterilizer Lamp
- Water Pump
- ESP32 Wemos Lolin
- Relay boards
- ...
will follow... first, I want to create a decent PCB design