MaxText is a high performance, arbitrarily scalable, open-source, simple, easily forkable, well-tested, batteries included LLM written in pure Python/Jax and targeting Google Cloud TPUs. MaxText typically achieves 55% to 60% model-flop utilization and scales from single host to very large clusters while staying simple and "optimization-free" thanks to the power of Jax and the XLA compiler.

MaxText aims to be a launching off point for ambitious LLM projects both in research and production. We encourage users to start by experimenting with MaxText out of the box and then fork and modify MaxText to meet their needs.

• Getting Started
• Runtime Performance Results
• Comparison To Alternatives
• Development

There are three recommended patterns for running MaxText. You can run locally, run on a cluster experimentally or spawn a production-style that is managed by Google Compute Engine. We recommend starting with Local Development, moving to Cluster Experimentation for some ad hoc development and ultimately running your long running jobs with Queued Resources.

You need to run these steps once per project prior to any local development or cluster experiments.

1. Create two gcs buckets in your project, one for to downloading and retreiving the dataset and the other for storing the logs.
2. Download the dataset in your gcs bucket

bash download_dataset.sh {GCS_PROJECT} {GCS_BUCKET_NAME}

3. Change config values for base_output_directory and dataset_path in configs/base.yml. vocab_relative_path is relative to base_output_directory for loading the tokenizer. MaxText assumes these GCS buckets are created in the same project and that it has permissions to read and write from them. We also recommend reviewing the configurable options in configs/base.yml, for instance you may change the steps or logging_period by either modifying configs/base.yml or by passing in steps and logging_period as additional args to the train.py call.

Local development is the faster and most convenient way to run MaxText. However, it doesn't scale to multiple hosts.

1. Create and SSH to the single-host TPU of your choice. We recommend a v4-8.
2. Clone MaxText onto that TPUVM.
3. Within the root directory of that git repo, install dependencies by running:

bash setup.sh

4. After installation completes, run training with the command:

python3 MaxText/train.py MaxText/configs/base.yml run_name=${USER}_$(date +%Y-%m-%d-%H-%M-%S)

5. If you want to decode, you can decode as follows.

python3 MaxText/decode.py MaxText/configs/base.yml run_name=${USER}_$(date +%Y-%m-%d-%H-%M-%S)

Be aware, these decodings will be random. To get high quality decodings you need pass in a checkpoint, typically via the load_parameters_path argument.

This workflow using multihost_runner.py is optimized for quick experiments, repeatedly re-using the same TPUs. Because the multihost_runner.py script depends on long-lived ssh connections, we do not recommend it for any long-running jobs.

We call the runner machine the one that multihost_runner.py is called from. This script will ssh into TPUVM worker machines that are found from the --TPU_PREFIX flag, and must be different than the runner machine. If the runner machine is a cloud VM, it must be in the same project as the workers.

The multihost_runner.py script:

• Distributes your code to multiple worker TPUVM's, recursively copying chosen directory
• Runs the code on the workers
• Logs and monitors the processes' error statuses and brings the logs back to the runner machine.

Although there are several steps below, most are for the initial setup. Once setup you can continually make changes to your code and re-run your code with only step 5.

1. Choose a directory on your runner machine to develop and clone MaxText into. The runner machine can either be a TPUVM or not, but it cannot be one of the workers. Clone MaxText, and cd into the root of the repo.

2. Set your project, zone, gcloud permissions and ssh keys.

   Authorize gcloud to access the Cloud Platform with Google user credentials

   gcloud auth login
   

   Set your gcloud config, see https://cloud.google.com/sdk/gcloud/reference/config for more.

   PROJECT=<project>
   

   ZONE=<zone>
   

   gcloud config set project $PROJECT
   gcloud config set compute/zone $ZONE
   

   Create ssh keys for gcloud, we recommend leaving a blank password (hit enter twice after running the below command)

   ssh-keygen -f ~/.ssh/google_compute_engine 
   

3. Create your instances via Queued Resource (QR). Choose names for your TPUs and QR:

   TPU_PREFIX=${USER}_$(date +%Y-%m-%d-%H-%M-%S) # Use new names when you create new TPUs
   QR_ID=$TPU_PREFIX # Convenient to re-use the node names, but can be different
   

   Choose the number of nodes (we use 2 below, but you may customize this and other feature of your TPU(s))

   NODE_COUNT=2
   

   Create a multislice environment of nodes using create queued resources

   gcloud alpha compute tpus queued-resources create $QR_ID --accelerator-type=v4-8 --runtime-version=tpu-vm-v4-base --node-count=$NODE_COUNT --node-prefix=$TPU_PREFIX  --reserved
   

   You have to wait to for the QR to become ACTIVE (as opposed to ACCEPTED or PROVISIONING) which corresponds to the worker nodes becoming READY (as opposed to CREATING). This may take a minute or two and can be checked via

   gcloud alpha compute tpus queued-resources list --filter=$QR_ID 
   

4. Install dependencies.

   pip3 install absl-py # Dependency of multihost_runner.py
   python3 multihost_runner.py --TPU_PREFIX=$TPU_PREFIX --COMMAND="bash setup.sh" # Dependencies of MaxText/train.py
   

5. Run your training job.

   Set a RUN_NAME for your job:

   RUN_NAME=${USER}_$(date +%Y-%m-%d-%H-%M-%S) # You may set this to any unique name for a fresh run.
   

   python3 multihost_runner.py --TPU_PREFIX=$TPU_PREFIX --COMMAND="python3 MaxText/train.py MaxText/configs/base.yml run_name=$RUN_NAME dcn_data_parallelism=$NODE_COUNT"
   

6. Clean up TPUs and QR when finished.

   There is ongoing work to simplify this step into a single command, but for now it is split into two main steps:

   a. Delete the nodes

   for ((i=0; i<$NODE_COUNT; i++))
   do
       curl -X DELETE -H "Authorization: Bearer $(gcloud auth print-access-token)" https://tpu.googleapis.com/v2alpha1/projects/$PROJECT/locations/$ZONE/nodes/${TPU_PREFIX}-$i
   done
   

   b. Delete the QR, first waiting for the nodes the to be deleted (~15 seconds). You should see the status of the QR will change from ACTIVE to SUSPENDING to SUSPENDED as the nodes are deleted (the QR must be SUSPENDED to be deletable), which can be checked via

   gcloud alpha compute tpus queued-resources list --filter=$QR_ID
   

   When the QR is in state SUSPENDED, delete it.

   gcloud alpha compute tpus queued-resources delete $QR_ID
   

The workflow using multihost_job.py is optimized for long running experiments, providing resiliency against hardware failure and avoiding long running ssh connections. Its latency is much higher than multihost_runner.py because it needs to provision new capacity each time. The multihost_job.py script ends once the request to create the TPUs is issued. Currently logs are written to GCS at the end of the job, but we soon to plan move to gcloud logging to allow monitoring of the job.

The multihost_job.py script:

• Copies your code to your GCS bucket
• Spins up specified TPU VM(s) via CQR
• Directs the TPU's to download then run that code. Because this logic is within the CQR's startup script, if there hardware is interrupted, the job will be rescheduled and resumed.
• Logs locally to each worker TPU, sending these logs to GCS at the job end
• Delete the TPUs at the end of the job.

1. Choose a directory on your runner machine to develop and clone MaxText into. The runner machine can either be a TPUVM or not. Clone MaxText, and cd into the root of the repo.

2. Set your project, zone, and gcloud permissions. Authorize gcloud to access the Cloud Platform with Google user credentials

   gcloud auth login
   

   Set your gcloud config, see https://cloud.google.com/sdk/gcloud/reference/config for more.

   PROJECT=<project>
   

   ZONE=<zone>
   

   gcloud config set project $PROJECT
   gcloud config set compute/zone $ZONE
   

3. Link to a GCS bucket. Create a bucket if you don't already have one, see: https://cloud.google.com/storage/docs/creating-buckets for instructions to create one. Once you've identified your bucket:

   BUCKET_NAME=<your-bucket>
   

4. Run your training job.

   Choose the number of nodes (we use 2 below, but you may customize this and other feature of your TPU(s))

   NODE_COUNT=2
   

   pip3 install absl-py # Dependency of multihost_job.py
   RUN_NAME=${USER}_$(date +%Y-%m-%d-%H-%M-%S) # You may set this to any unique name for a fresh run.
   python3 multihost_job.py --NUM_SLICES=$NODE_COUNT --RUN_NAME=$RUN_NAME --BUCKET_NAME=$BUCKET_NAME --COMMAND="bash setup.sh && python3 MaxText/train.py MaxText/configs/base.yml run_name=$RUN_NAME dcn_data_parallelism=$NODE_COUNT"
   

5. View the job's logs in your GCS bucket.

   The link to your job's logs is printed at the end of the multihost_job output. They are located in BUCKET_NAME/BUCKET_PATH/RUN_NAME.

6. Cleanup the QR when finished.

   There is ongoing work to automate this step.

   When your job is finished multihost_job.py will delete the TPUs for you. However you still need to delete the QR. You can check that your job is done because the QR will no longer be ACTIVE, but instead in state SUSPENDED since the nodes have been deleted.

   gcloud alpha compute tpus queued-resources list --filter=$RUN_NAME # You can remove the filter to list all QR in your project 
   

   Then delete the QR

   gcloud alpha compute tpus queued-resources delete $RUN_NAME
   

For a 22B model. See full run configs in MaxText/configs/ as 1xv4-128.sh, 2xv4-128.sh and 4xv4-128.sh.

For a 52B model. See full run configs in MaxText/configs/ as 1xv4-384.sh and 2xv4-512.sh.

MaxText is heavily inspired by MinGPT/NanoGPT, elegant standalone GPT implementations written in PyTorch and targeting Nvidia GPUs. MaxText is more complex but has an MFU more than three times the 17% reported most recently with that codebase, is massively scalable and implements a key-value cache for efficient auto-regressive decoding.

MaxText is more similar to Nvidia/Megatron-LM, a very well tuned LLM implementation targeting Nvidia GPUs. The two implementations achieve comparable MFUs. The difference in the codebases highlights the different programming strategies. MaxText is pure Python, relying heavily on the XLA compiler to achieve high performance. By contrast, Megatron-LM is a mix of Python and CUDA, relying on well-optimized CUDA kernels to achieve high performance.

MaxText is also comparable to Pax. Like Pax, MaxText provides high-performance and scalable implementations of LLMs in Jax. Pax focuses on enabling powerful configuration parameters, enabling developers to change the model by editing config parameters. By contrast, MaxText is a simple, concrete implementation of an LLM that encourages users to extend by forking and directly editing the source code. The right choice depends on your project's priorities.

Whether you are forking MaxText for your own needs or intending to contribute back to the community, we wanted to offer simple testing recipes.

To run unit tests and lint, simply run:

bash unit_test_and_lint.sh

The full suite of end-to-end tests is in end_to_end/. We run them with a nightly cadence.