Migrated project over to Gitlab!.
Port of XSteam tables into Python originally released by Magnus Holmgren.
XSteam provides steam and water properties according to IAPWS release IF-97. The range of applicability is from 0-1000 bar and 0-2000 °C.
Some transport properties (thermal conductivity and viscosity) are also available and based upon IAPWS 1998.
Two options are available. The first is to install from PyPI using pip
pip install XSteamPythonOr by cloning and running
python setup.py installXSteamPython only requires that SciPy be installed.
For development, all dependencies are contained in requirements.txt.
>>> import XSteamPython as stm
>>> enthalpy=stm.h_pT(101.0, 300.0)
>>> print(enthalpy)
3074.515918340631
>>> stm.switchUnits()
Using English units
>>> enthalpy=stm.h_pT(14.7, 70.0)
>>> print(enthalpy)
38.11798524502647
>>> dir(stm)
['Boundaries', 'Constants', 'Convert', 'P_hs', 'Pr_pT', 'Pr_ph', 'Psat_T', 'Psat_s', 'Region1', 'Region2', 'Region3', 'Region4', 'Region5', 'Regions', 'T_hs', 'T_ph', 'T_ps', 'Tsat_p', 'Tsat_s', 'Viscosity', 'XSteamPython', '__builtins__', '__cached__', '__doc__', '__file__', '__loader__', '__name__', '__package__', '__path__', '__spec__', 'cpL_T', 'cpL_p', 'cpV_T', 'cpV_p', 'cp_pT', 'cp_ph', 'cp_ps', 'cvL_T', 'cvL_p', 'cvV_T', 'cvV_p', 'cv_pT', 'cv_ph', 'cv_ps', 'englishUnits', 'hL_T', 'hL_p', 'hV_T', 'hV_p', 'h_Tx', 'h_pT', 'h_ps', 'h_px', 'kappa_pT', 'kappa_ph', 'math', 'my_pT', 'my_ph', 'my_ps', 'rhoL_T', 'rhoL_p', 'rhoV_T', 'rhoV_p', 'rho_pT', 'rho_ph', 'rho_ps', 'sL_T', 'sL_p', 'sV_T', 'sV_p', 's_pT', 's_ph', 'st_p', 'st_t', 'surfaceTension_T', 'switchUnits', 'tcL_T', 'tcL_p', 'tcV_T', 'tcV_p', 'tc_hs', 'tc_pT', 'tc_pTrho', 'tc_ph', 'uL_T', 'uL_p', 'uV_T', 'uV_p', 'u_pT', 'u_ph', 'u_ps', 'vL_T', 'vL_p', 'vV_T', 'vV_p', 'v_pT', 'v_ph', 'v_ps', 'vx_ph', 'vx_ps', 'wL_T', 'wL_p', 'wV_T', 'wV_p', 'w_pT', 'w_ph', 'w_ps', 'x_ph', 'x_ps']Note that calling stm.switchUnits() changes from SI to English units and vice versa. Default is SI units.
The syntax for function calling is first the wanted property, followed by an underscore followed by input property(ies). Example:
h_pT(101.0, 300.0)
The example will return enthalpy given a pressure (101 kPa) and temperature (300 °C).
| Property | Key |
|---|---|
| T | Temperature (°C or °F) |
| p | Pressure (kPa or psi) |
| h | Enthalpy (kJ/kg or btu/lb) |
| v | Specific volume (m**3/kg or ft**3/lb) |
| rho | Density (kg/m**3 or lb/ft**3) |
| s | Specific entropy (kJ/(kg°C) or btu/(lb°F)) |
| u | Specific internal energy (kJ/kg or btu/lb) |
| Cp | Specific heat capacity constant pressure (kJ/(kg°C) or btu/(lb°F)) |
| Cv | Specific heat capacity constant volume (kJ/(kg°C) or btu/(lb°F)) |
| w | Speed of sound (m/s or ft/s) |
| my | Viscosity (N*s/m**2 or lbm/ft/hr) |
| Pr | Prandtl number |
| kappa | Heat capacity ratio |
| tc | Thermal Conductivity (W/(m*°C) or btu/(h*ft*°F)) |
| st | Surface Tension (N/m or lb/ft) |
| x | Vapor fraction (dmnls) |
| vx | Vapor Volume Fraction (dmnls) |
Some functions can have a little extra after the wanted property
| Tag | Key |
|---|---|
| L | Liquid phase |
| V | Vapor phase |
| sat | At saturation |