Extensible Open Source Plotter

A plotter for small or large vinyl roll DIY mostly printed part Using forked Marlin with Arduino 2560 + Ramps 1.4

Anyone is free to contribute for make it better stronger faster

#Printed Parts STL folder Contains all files to be printed. The final X on name is for number of copy you need Variable mean is depend of the length you wan't for you're plotter.

The variable part is Y Roll Parts On pro plotter there is 4 roll for 1m37 On my 30 cm version i Put 3 on each 2020 Aluminium profile tube

Same For Y_Grid_Bar_Support this part is for prevent the 8mm bar flex

There is missing X endstop STL mainly because i don't use endstop for moment Free to draw it if it wasn't done. ##I print all stl at 25% infill

• PLA or ABS
• Flex filament (my roll are made in 90A durometer and it's seem ok)
• MGN 12H Linear rail (length depend of the working size you want) you need 2 carriage one for X and one for Z 12C type can Work but fixation of X carriage need to be rework
• 1 GT2 Belt Depend of Worksize
• 1 GT2 pulley
• 3 Nema 17 (i Took High torque)
• 1 Servo 9G SG90
• 2 5x8 coupler
• 6 608zz Bearing
• 2 F625ZZ per Y pressure roll (for my 30cm i need 12 for 6 Rolls)
• 2 F625ZZ for X tensionner (625zz will do the job too)
• 4 2020 Aluminium Bar length depend of you're working size (i will done the calculation from worksize later)
• 2 8mm Rod length depend of you're working size (i will done the calculation from worksize later)
• M3 and M4 screw and nuts / T-nuts and washer (i will precise number and size later)
• Nails Diam 3mm x 70mm (2 for pressure system and 2 for closing system)
• Hard small spring
• Blade Holder with blade / Pen and other stuff you wan't use in plotter
• Maybe something i don't have in mind