Garmin GMC710 Flight Simulator Panel

Test Video

• why you need a real MCP for X-Plane?
• hand-on review
• QGMC710 dismantle

Purchase link (chinese taobao.com) https://item.taobao.com/item.htm?spm=a230r.1.14.3.18b63fd9y2cMrM&id=584036361539&ns=1&abbucket=1#detail

International third party purchasing: https://www.superbuy.com/ and paste the link above

QuickMake QGMC710 official website: https://x-plane.vip/quickmake/

(Third party ,easy for international purchase,they maybe charge a fee of $8-10,but I'm not sure how they working.)

Operating system: win7, win10

1. USB interface plug and play, simulate gamepad mode, compatible with a variety of simulators.
2. Connect to the new computer for the first time, the system will automatically install the driver, you need to wait patiently for a while. optional step : button test The input interface uses the analog game controller buttons, a total of 28 buttons, after connect the computer, the "game controller" "QGMC710" will be found in the control panel, and the property page can be tested to test the button (due to the higher response frequency of the encoding switch, In this test page may not display properly, you can also use other test software to test. If the QGMC710 is not found in the control panel or test software, please unplug the USB and replug it. Of course, the above steps can also jump over.

3. Enter the game and configure the buttons according to the button function.

4. It's OK, the QGMC710 can input buttons now. If you want advanced features, the next step.

5. Corresponding to different simulators, download the driver code, (the host computer code is open source) can also be modified into the driver of your favorite model.

6. Adjust the backlight manually: Hold down the ALT SEL encoder push button and turn the clockwise or counterclockwise to adjust the backlight. (Because the original machine does not press the function of the code switch, the QGMC710 adds a button, which can also be set to other functions, but the button will be triggered when the backlight is manually adjusted.
   

7. The lua scripts supports backlight on and off, and brightness adjustment 0-255 level, the status of each status indicator.

Cpuwolf 大神测试视频: https://www.bilibili.com/video/av37909998/

• 夜间背光欣赏:https://www.bilibili.com/video/av46395588
• 按键设置教程:https://www.bilibili.com/video/av38898695

QGMC710 使用手册
操作系统：win7 , win10
1.USB接口即插即用,免驱动,采用模拟游戏控制器模式,兼容多种模拟器。
2.首次连接新电脑,系统会自动安装驱动程序,需要耐心等待一会。
(可选步骤-按键测试)
输入接口采用模拟游戏控制器按键,一共28个按键,接入电脑后,在控制面板会发现”游戏控制器” “QGMC710” ,进入属性页可以测试按钮,(由于编码开关的响应频率较高,在此测试面页可能会显示不正常),也可以用其它的测试软件来测试.如果控制面板里或测试软件里没发现QGMC710,请拔掉USB重新接入即可.当然以上步骤也可以跳过.
3.进入游戏,根据按键功能配置按键.
4.现在可以使用了,如果想得到增强的功能,下一步
5.对应不同的模拟器,下载驱动代码,(上位机代码开源)也可以自己修改成自己喜欢机型的驱动.
6.手动调整背光： 按住ALT SEL 编码开关不放，顺时针或逆时针旋转来调节背光。（由于原机此编码开关没有按下功能，QGMC710增加了一个按钮，也可以设置成其它的功能，但手动调背光的时候会触发按键。
7.上位代码支持背光开启关闭，以及亮度调整 0-255级，每个状态指示灯的状态。