Re-attempt to add Equinox with newer Via changes

keyboards/ai03/equinox/config.h

@@ -0,0 +1,194 @@
+/*
+Copyright 2019 Ryota Goto
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <https://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xA103
+#define PRODUCT_ID 0x0004
+#define DEVICE_VER 0x0001
+#define MANUFACTURER ai03 Design Studio
+#define PRODUCT Equinox
+#define DESCRIPTION Compact PCB-mount keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D3, C5, D4, D5 }
+#define MATRIX_COL_PINS { D1, D2, C6, C7, B6, B5, B4, B3, B2, B1, B0, D6 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+
+#define BACKLIGHT_PIN B7
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 5
+
+//#define RGB_DI_PIN C4
+//#ifdef RGB_DI_PIN
+// #define RGBLED_NUM 12
+// #define RGBLIGHT_HUE_STEP 8
+// #define RGBLIGHT_SAT_STEP 8
+// #define RGBLIGHT_VAL_STEP 8
+// #define RGBLIGHT_LIMIT_VAL 230 /* The maximum brightness level */
+// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+ /*== all animations enable ==*/
+// #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+// #define RGBLIGHT_EFFECT_BREATHING
+// #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+// #define RGBLIGHT_EFFECT_SNAKE
+// #define RGBLIGHT_EFFECT_KNIGHT
+// #define RGBLIGHT_EFFECT_CHRISTMAS
+// #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+// #define RGBLIGHT_EFFECT_RGB_TEST
+// #define RGBLIGHT_EFFECT_ALTERNATING
+//#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP H
+//#define MAGIC_KEY_HELP_ALT SLASH
+//#define MAGIC_KEY_DEBUG D
+//#define MAGIC_KEY_DEBUG_MATRIX X
+//#define MAGIC_KEY_DEBUG_KBD K
+//#define MAGIC_KEY_DEBUG_MOUSE M
+//#define MAGIC_KEY_VERSION V
+//#define MAGIC_KEY_STATUS S
+//#define MAGIC_KEY_CONSOLE C
+//#define MAGIC_KEY_LAYER0 0
+//#define MAGIC_KEY_LAYER0_ALT GRAVE
+//#define MAGIC_KEY_LAYER1 1
+//#define MAGIC_KEY_LAYER2 2
+//#define MAGIC_KEY_LAYER3 3
+//#define MAGIC_KEY_LAYER4 4
+//#define MAGIC_KEY_LAYER5 5
+//#define MAGIC_KEY_LAYER6 6
+//#define MAGIC_KEY_LAYER7 7
+//#define MAGIC_KEY_LAYER8 8
+//#define MAGIC_KEY_LAYER9 9
+//#define MAGIC_KEY_BOOTLOADER B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK CAPS
+//#define MAGIC_KEY_EEPROM E
+//#define MAGIC_KEY_EEPROM_CLEAR BSPACE
+//#define MAGIC_KEY_NKRO N
+//#define MAGIC_KEY_SLEEP_LED Z
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/ai03/equinox/equinox.c

@@ -0,0 +1,17 @@
+/* Copyright 2019 Ryota Goto
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <https://www.gnu.org/licenses/>.
+ */
+#include "equinox.h"
+

keyboards/ai03/equinox/equinox.h

@@ -0,0 +1,39 @@
+/* Copyright 2019 Ryota Goto
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <https://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, \
+ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, \
+ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, \
+ K300, K301, K302, K304, K306, K308, K309, K310, K311 \
+) \
+{ \
+ { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011 }, \
+ { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111 }, \
+ { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211 }, \
+ { K300, K301, K302, KC_NO, K304, KC_NO, K306, KC_NO, K308, K309, K310, K311 } \
+}

keyboards/ai03/equinox/info.json

@@ -0,0 +1,58 @@
+{
+ "keyboard_name": "Equinox", 
+ "url": "", 
+ "maintainer": "ai03", 
+ "width": 13, 
+ "height": 4, 
+ "layouts": {
+ "LAYOUT": {
+ "layout": [
+ {"label":"Tab", "x":0, "y":0, "w":1.5},
+ {"label":"Q", "x":1.5, "y":0},
+ {"label":"W", "x":2.5, "y":0},
+ {"label":"E", "x":3.5, "y":0},
+ {"label":"R", "x":4.5, "y":0},
+ {"label":"T", "x":5.5, "y":0},
+ {"label":"Y", "x":6.5, "y":0},
+ {"label":"U", "x":7.5, "y":0},
+ {"label":"I", "x":8.5, "y":0},
+ {"label":"O", "x":9.5, "y":0},
+ {"label":"P", "x":10.5, "y":0},
+ {"label":"|", "x":11.5, "y":0, "w":1.5},
+ {"label":"Caps Lock", "x":0, "y":1, "w":1.75},
+ {"label":"A", "x":1.75, "y":1},
+ {"label":"S", "x":2.75, "y":1},
+ {"label":"D", "x":3.75, "y":1},
+ {"label":"F", "x":4.75, "y":1},
+ {"label":"G", "x":5.75, "y":1},
+ {"label":"H", "x":6.75, "y":1},
+ {"label":"J", "x":7.75, "y":1},
+ {"label":"K", "x":8.75, "y":1},
+ {"label":"L", "x":9.75, "y":1},
+ {"label":":", "x":10.75, "y":1},
+ {"label":"Enter", "x":11.75, "y":1, "w":1.25},
+ {"label":"Shift", "x":0, "y":2, "w":1.25},
+ {"label":"Fn", "x":1.25, "y":2},
+ {"label":"Z", "x":2.25, "y":2},
+ {"label":"X", "x":3.25, "y":2},
+ {"label":"C", "x":4.25, "y":2},
+ {"label":"V", "x":5.25, "y":2},
+ {"label":"B", "x":6.25, "y":2},
+ {"label":"N", "x":7.25, "y":2},
+ {"label":"M", "x":8.25, "y":2},
+ {"label":"<", "x":9.25, "y":2},
+ {"label":">", "x":10.25, "y":2},
+ {"label":"Shift", "x":11.25, "y":2, "w":1.75},
+ {"label":"Ctrl", "x":0, "y":3, "w":1.25},
+ {"label":"Super", "x":1.25, "y":3},
+ {"label":"Alt", "x":2.25, "y":3, "w":1.25},
+ {"x":3.5, "y":3, "w":2.25},
+ {"x":5.75, "y":3},
+ {"x":6.75, "y":3, "w":2.75},
+ {"label":"Alt", "x":9.5, "y":3, "w":1.25},
+ {"label":"Super", "x":10.75, "y":3},
+ {"label":"Ctrl", "x":11.75, "y":3, "w":1.25}
+ ]
+ }
+ }
+}

keyboards/ai03/equinox/keymaps/default/keymap.c

@@ -0,0 +1,43 @@
+/* Copyright 2019 Ryota Goto
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <https://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+/*
+ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, \
+ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, \
+ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, \
+ K300, K301, K302, K304, K306, K308, K309, K310, K311 \
+*/
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [0] = LAYOUT( /* Base */
+ MO(2), KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, 
+ MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, 
+ KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, 
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_GRV, KC_RGUI, KC_DEL
+ ),
+ [1] = LAYOUT( /* Extra Keys */
+ _______, _______, KC_PGUP, _______, _______, KC_LBRC, KC_RBRC, _______, KC_UP, _______, _______, _______, 
+ _______, KC_HOME, KC_PGDN, KC_END, _______, KC_BSLS, KC_SLSH, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, 
+ _______, _______, _______, _______, _______, KC_PSCR, KC_ESC, KC_QUOT, _______, KC_DOT, _______, _______, 
+ _______, _______, _______, _______, _______, _______, _______, _______, _______
+ ),
+ [2] = LAYOUT( /* Num and FN */
+ _______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, 
+ _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, _______, _______, _______, _______, _______, 
+ _______, _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______, 
+ _______, _______, _______, _______, _______, _______, _______, _______, RESET
+ )
+};

keyboards/ai03/equinox/keymaps/default/readme.md

@@ -0,0 +1,3 @@
+# The default keymap for equinox
+
+Basic, nothing special

keyboards/ai03/equinox/keymaps/proto_via/config.h

@@ -0,0 +1,23 @@
+/*
+Copyright 2019 Ryota Goto
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <https://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+// Fix for prototype missing COL0, COL1, using backlight and RGB underglow I/O pins
+#undef MATRIX_COL_PINS
+#define MATRIX_COL_PINS { C4, B7, C6, C7, B6, B5, B4, B3, B2, B1, B0, D6 }
+