Fix F303 audio output on A4 with the dac_basic driver #12480
Merged
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Description
The
dac_basic
audio driver did not work properly with#define AUDIO_PIN A4
(instead of configuring the A4 pin, the driver actually was switching the A5 pin to analog mode, breaking any other usage of that pin in addition to emitting a distorted signal on the improperly configured A4 pin). Fix the code to configure the A4 pin as intended.Tested on STM32F303CCT6. Without the fix an attempt to enable audio with
#define AUDIO_PIN A4
also broke the basic keyboard functionality with#define MATRIX_COL_PINS { A5 }
(the column pin was always seen as active); after applying the fix the A5 pin started working in the matrix again.Types of Changes
Issues Fixed or Closed by This PR
@GKD#3464
in the QMK Discord.Checklist