Update to drashna keymaps (#4)

* Minor updates to keymaps

* Minor updates to keymaps

keyboards/ergodox_ez/keymaps/drashna/config.h

@@ -13,5 +13,6 @@
 #define RGBLIGHT_EFFECT_BREATHE_CENTER 1
 #endif // RGBLIGHT_ENABLE
 
+#define FORCE_NKRO
 
 #endif

keyboards/ergodox_ez/keymaps/drashna/keymap.c

@@ -32,126 +32,18 @@ bool skip_leds = false;
 
 
 #ifdef TAP_DANCE_ENABLE
-
-//define diablo macro timer variables
-static uint16_t diablo_timer[4];
-static uint8_t diablo_times[] = { 0, 1, 3, 5, 10, 30 };
-static uint8_t diablo_key_time[4];
-
-bool check_dtimer(uint8_t dtimer) {
- // has the correct number of seconds elapsed (as defined by diablo_times)
- return (timer_elapsed(diablo_timer[dtimer]) < (diablo_key_time[dtimer] * 1000)) ? false : true;
-};
-
-enum {
- TD_FLSH = 0,
- TD_DIABLO_1,
- TD_DIABLO_2,
- TD_DIABLO_3,
- TD_DIABLO_4
-};
-
-// on each tap, light up one led, from right to left
-// on the forth tap, turn them off from right to left
-
-void dance_flsh_each(qk_tap_dance_state_t *state, void *user_data) {
- if (!skip_leds) {
- ergodox_board_led_off();
- ergodox_right_led_1_off();
- ergodox_right_led_2_off();
- ergodox_right_led_3_off();
- skip_leds = true;
- }
- switch (state->count) {
- case 1:
- ergodox_right_led_1_on();
- break;
- case 2:
- ergodox_right_led_2_on();
- break;
- case 3:
- ergodox_right_led_3_on();
- break;
- case 4:
- ergodox_right_led_1_off();
- _delay_ms(50);
- ergodox_right_led_2_off();
- _delay_ms(50);
- ergodox_right_led_3_off();
-
- }
-}
-
-// on the fourth tap, set the keyboard on flash state
-// and set the underglow to red, because red == bad
-void dance_flsh_finished(qk_tap_dance_state_t *state, void *user_data) {
- if (state->count >= 4) {
-#ifdef RGBLIGHT_ENABLE
- rgblight_enable();
- rgblight_mode(1);
- rgblight_setrgb(0xff, 0x00, 0x00);
+#define KC_D3_1 TD(TD_D3_1)
+#define KC_D3_2 TD(TD_D3_2)
+#define KC_D3_3 TD(TD_D3_3)
+#define KC_D3_4 TD(TD_D3_4)
+#else
+#define KC_D3_1 KC_1
+#define KC_D3_2 KC_2
+#define KC_D3_3 KC_3
+#define KC_D3_4 KC_4
 #endif
- reset_tap_dance(state);
- reset_keyboard();
- }
-}
-
-// Cycle through the times for the macro, starting at 0, for disabled.
-// Max of six values, so don't exceed
-void diablo_tapdance_master(qk_tap_dance_state_t *state, void *user_data, uint8_t diablo_key) {
- if (state->count >= 7) {
- diablo_key_time[diablo_key] = diablo_times[0];
- reset_tap_dance(state);
- }
- else {
- diablo_key_time[diablo_key] = diablo_times[state->count - 1];
- }
-}
 
 
-// Would rather have one function for all of this, but no idea how to do that...
-void diablo_tapdance1(qk_tap_dance_state_t *state, void *user_data) {
- diablo_tapdance_master(state, user_data, 0);
-}
-
-void diablo_tapdance2(qk_tap_dance_state_t *state, void *user_data) {
- diablo_tapdance_master(state, user_data, 1);
-}
-
-void diablo_tapdance3(qk_tap_dance_state_t *state, void *user_data) {
- diablo_tapdance_master(state, user_data, 2);
-}
-
-void diablo_tapdance4(qk_tap_dance_state_t *state, void *user_data) {
- diablo_tapdance_master(state, user_data, 3);
-}
-
-
-// if the flash state didnt happen, then turn off leds, left to right
-void dance_flsh_reset(qk_tap_dance_state_t *state, void *user_data) {
- _delay_ms(200);
- ergodox_right_led_3_off();
- _delay_ms(200);
- ergodox_right_led_2_off();
- _delay_ms(200);
- ergodox_right_led_1_off();
- _delay_ms(500);
- skip_leds = false;
-}
-
-//Tap Dance Definitions
-qk_tap_dance_action_t tap_dance_actions[] = {
- //Once for Blue, Twice for Green, Thrice for Red, and four to flash
- [TD_FLSH] = ACTION_TAP_DANCE_FN_ADVANCED(dance_flsh_each, dance_flsh_finished, dance_flsh_reset),
- // tap once to disable, and more to enable timed micros
- [TD_DIABLO_1] = ACTION_TAP_DANCE_FN(diablo_tapdance1),
- [TD_DIABLO_2] = ACTION_TAP_DANCE_FN(diablo_tapdance2),
- [TD_DIABLO_3] = ACTION_TAP_DANCE_FN(diablo_tapdance3),
- [TD_DIABLO_4] = ACTION_TAP_DANCE_FN(diablo_tapdance4),
-
-};
-#endif
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 /* Keymap 0: Basic layer
  * 
@@ -430,9 +322,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  */
  [_DIABLO] = LAYOUT_ergodox(
  KC_ESCAPE, KC_V, KC_D, KC_LALT, KC_NO, KC_NO, KC_NO,
- KC_TAB, KC_S, KC_F, KC_I, KC_M, KC_T, KC_TRNS,
+ KC_TAB, KC_S, KC_I, KC_F, KC_M, KC_T, KC_TRNS,
  KC_Q, KC_1, KC_2, KC_3, KC_4, KC_G,
- KC_LCTL, TD(TD_DIABLO_1), TD(TD_DIABLO_2), TD(TD_DIABLO_3), TD(TD_DIABLO_4), KC_Z, KC_NO,
+ KC_LCTL,  KC_D3_1, KC_D3_2, KC_D3_3, KC_D3_4, KC_Z, KC_NO,
  KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
  KC_L, KC_J,
  KC_F,
@@ -499,44 +391,6 @@ bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
  return true;
 }
 
-#ifdef TAP_DANCE_ENABLE
-
-// Sends the key press to system, but only if on the Diablo layer
-void send_diablo_keystroke(uint8_t diablo_key) {
- if (biton32(layer_state) == _DIABLO) {
- switch (diablo_key) {
- case 0:
- SEND_STRING("1");
- break;
- case 1:
- SEND_STRING("2");
- break;
- case 2:
- SEND_STRING("3");
- break;
- case 3:
- SEND_STRING("4");
- break;
- }
- }
-}
-
-// Checks each of the 4 timers/keys to see if enough time has elapsed
-// Runs the "send string" command if enough time has passed, and resets the timer.
-void run_diablo_macro_check(void) {
- uint8_t dtime;
-
- for (dtime = 0; dtime < 4; dtime++) {
- if (check_dtimer(dtime) && diablo_key_time[dtime]) {
- diablo_timer[dtime] = timer_read();
- send_diablo_keystroke(dtime);
- }
- }
-
-}
-
-#endif
-
 
 void matrix_init_keymap(void) { // Runs boot tasks for keyboard
 };
@@ -566,9 +420,5 @@ void matrix_scan_keymap(void) { // runs frequently to update info
 
  }
 
- // Run Diablo 3 macro checking code.
-#ifdef TAP_DANCE_ENABLE
- run_diablo_macro_check();
-#endif
 };
 

keyboards/handwired/woodpad/keymaps/drashna/config.h

@@ -24,6 +24,7 @@
 #endif // TAP_DANCE_ENABLE
 
 
+#define B5_AUDIO
 
 
 #ifdef RGBLIGHT_ENABLE
@@ -38,6 +39,6 @@
 #define RGBLIGHT_EFFECT_BREATHE_CENTER 1
 #endif // RGBLIGHT_ENABLE
 
-
+#define FORCE_NKRO
 
 #endif