Format code according to conventions (#12292)

Co-authored-by: QMK Bot <[email protected]>

drivers/chibios/ws2812_spi.c

@@ -34,15 +34,15 @@
 
 // Define SPI config speed
 // baudrate should target 3.2MHz
-// F072 fpclk = 48MHz 
+// F072 fpclk = 48MHz
 // 48/16 = 3Mhz
 #if WS2812_SPI_DIVISOR == 2
 # define WS2812_SPI_DIVISOR (0)
 #elif WS2812_SPI_DIVISOR == 4
 # define WS2812_SPI_DIVISOR (SPI_CR1_BR_0)
 #elif WS2812_SPI_DIVISOR == 8
 # define WS2812_SPI_DIVISOR (SPI_CR1_BR_1)
-#elif WS2812_SPI_DIVISOR == 16  //same as default
+#elif WS2812_SPI_DIVISOR == 16 // same as default
 # define WS2812_SPI_DIVISOR (SPI_CR1_BR_1 | SPI_CR1_BR_0)
 #elif WS2812_SPI_DIVISOR == 32
 # define WS2812_SPI_DIVISOR (SPI_CR1_BR_2)
@@ -53,14 +53,14 @@
 #elif WS2812_SPI_DIVISOR == 256
 # define WS2812_SPI_DIVISOR (SPI_CR1_BR_2 | SPI_CR1_BR_1 | SPI_CR1_BR_0)
 #else
-# define WS2812_SPI_DIVISOR (SPI_CR1_BR_1 | SPI_CR1_BR_0)  //default
+# define WS2812_SPI_DIVISOR (SPI_CR1_BR_1 | SPI_CR1_BR_0) // default
 #endif
 
 // Use SPI circular buffer
 #ifdef WS2812_SPI_USE_CIRCULAR_BUFFER
-# define WS2812_SPI_BUFFER_MODE 1  //circular buffer
+# define WS2812_SPI_BUFFER_MODE 1 // circular buffer
 #else
-# define WS2812_SPI_BUFFER_MODE 0  //normal buffer
+# define WS2812_SPI_BUFFER_MODE 0 // normal buffer
 #endif
 
 #define BYTES_FOR_LED_BYTE 4
@@ -112,10 +112,7 @@ void ws2812_init(void) {
  palSetLineMode(RGB_DI_PIN, WS2812_OUTPUT_MODE);
 
  // TODO: more dynamic baudrate
- static const SPIConfig spicfg = {
- WS2812_SPI_BUFFER_MODE, NULL, PAL_PORT(RGB_DI_PIN), PAL_PAD(RGB_DI_PIN),
- WS2812_SPI_DIVISOR
- };
+ static const SPIConfig spicfg = {WS2812_SPI_BUFFER_MODE, NULL, PAL_PORT(RGB_DI_PIN), PAL_PAD(RGB_DI_PIN), WS2812_SPI_DIVISOR};
 
  spiAcquireBus(&WS2812_SPI); /* Acquire ownership of the bus. */
  spiStart(&WS2812_SPI, &spicfg); /* Setup transfer parameters. */