Creates sensors that provide information about various sun related events.
Follow the installation instructions below. Then add one or more locations with desired sensors either via YAML, the UI or both.
You can use HACS to manage the installation and provide update notifications.
- Add this repo as a custom repository:
https://github.com/pnbruckner/ha-sun2
- Install the integration using the appropriate button on the HACS Integrations page. Search for "sun2".
Place a copy of the files from custom_components/sun2
in <config>/custom_components/sun2,
where <config> is your Home Assistant configuration directory.
NOTE: When downloading, make sure to use the
Rawbutton from each file's page.
This custom integration supports HomeAssistant versions 2023.4.0 or newer.
Reloads Sun2 from the YAML-configuration. Also adds SUN2 to the Developers Tools -> YAML page.
A list of configuration options for one or more "locations". Each location is defined by the following options.
Note: This defines configuration via YAML. However, the same sensors can be added to locations created in the UI.
| Key | Optional | Description |
|---|---|---|
unique_id |
no | Unique identifier for location. This allows any of the remaining options to be changed without looking like a new location. |
location |
yes | Name of location. Default is Home Assistant's current location name. |
latitude |
yes* | The location's latitude (in degrees) |
longitude |
yes* | The location's longitude (in degrees) |
time_zone |
yes* | The location's time zone. (See the "TZ database name" column at https://en.wikipedia.org/wiki/List_of_tz_database_time_zones.) |
elevation |
yes* | The location's elevation above sea level (in meters) |
binary_sensors |
yes | Binary sensor configurations as defined here |
sensors |
yes | Sensor configurations as defined here |
* These must all be used together. If not used, the default is Home Assistant's location configuration.
A list of one or more of the following.
'on' when sun's elevation is above threshold, 'off' when at or below threshold.
| Key | Optional | Description |
|---|---|---|
unique_id |
no | Unique identifier for entity. Must be unique within set of binary sensors for location. This allows any of the remaining options to be changed without looking like a new entity. |
elevation |
no | Elevation threshold (in degrees) or horizon |
name |
yes | Entity friendly name |
For example, this:
- unique_id: bs1
elevation: horizonWould be equivalent to:
- unique_id: bs1
elevation: -0.833
name: Above horizonA list of one or more of the following.
| Key | Optional | Description |
|---|---|---|
unique_id |
no | Unique identifier for entity. Must be unique within set of sensors for location. This allows any of the remaining options to be changed without looking like a new entity. |
time_at_elevation |
no | Elevation (in degrees) |
direction |
yes | rising (default) or setting |
icon |
yes | Default is mdi:weather-sunny |
name |
yes | Entity friendly name |
For example, this:
- unique_id: s1
time_at_elevation: -0.833Would be equivalent to:
- unique_id: s1
time_at_elevation: -0.833
direction: rising
icon: mdi:weather-sunny
name: Rising at minus 0.833 °| Key | Optional | Description |
|---|---|---|
unique_id |
no | Unique identifier for entity. Must be unique within set of sensors for location. This allows any of the remaining options to be changed without looking like a new entity. |
elevation_at_time |
no | Time string or input_datetime entity ID |
name |
yes | Entity friendly name |
When using an input_datetime entity it must have the time component. The date component is optional.
If the date is not present, the result will be the sun's elevation at the given time on the current date.
If the date is present, it will be used and the result will be the sun's elevation at the given time on the given date.
Also in this case, the sensor entity will not have yesterday, today and tomorrow attributes.
Besides the sensors described above, the following will also be created automatically. Simply enable or disable these entities as desired.
Some of these will be enabled by default. The rest will be disabled by default.
| Type | Enabled | Description |
|---|---|---|
| Solar Midnight | yes | The time when the sun is at its lowest point closest to 00:00:00 of the specified date; i.e. it may be a time that is on the previous day. |
| Astronomical Dawn | no | The time in the morning when the sun is 18 degrees below the horizon |
| Nautical Dawn | no | The time in the morning when the sun is 12 degrees below the horizon |
| Dawn | yes | The time in the morning when the sun is 6 degrees below the horizon |
| Rising | yes | The time in the morning when the sun is 0.833 degrees below the horizon. This is to account for refraction. |
| Solar Noon | yes | The time when the sun is at its highest point |
| Setting | yes | The time in the evening when the sun is 0.833 degrees below the horizon. This is to account for refraction. |
| Dusk | yes | The time in the evening when the sun is a 6 degrees below the horizon |
| Nautical Dusk | no | The time in the evening when the sun is a 12 degrees below the horizon |
| Astronomical Dusk | no | The time in the evening when the sun is a 18 degrees below the horizon |
These are all disabled by default.
| Type | Description |
|---|---|
| Daylight | The amount of time between sunrise and sunset |
| Civil Daylight | The amount of time between dawn and dusk |
| Nautical Daylight | The amount of time between nautical dawn and nautical dusk |
| Astronomical Daylight | The amount of time between astronomical dawn and astronomical dusk |
| Night | The amount of time between sunset and sunrise of the next day |
| Civil Night | The amount of time between dusk and dawn of the next day |
| Nautical Night | The amount of time between nautical dusk and nautical dawn of the next day |
| Astronomical Night | The amount of time between astronomical dusk and astronomical dawn of the next day |
These are also all disabled by default.
| Type | Description |
|---|---|
| Azimuth | The sun's azimuth (degrees) |
| Elevation | The sun's elevation (degrees) |
| Minimum Elevation | The sun's elevation at solar midnight (degrees) |
| maximum Elevation | The sun's elevation at solar noon (degrees) |
| deCONZ Daylight | Emulation of deCONZ Daylight Sensor |
| Phase | See Sun Phase Sensor |
| State | Description |
|---|---|
| Night | Sun is below -18° |
| Astronomical Twilight | Sun is between -18° and -12° |
| Nautical Twilight | Sun is between -12° and -6° |
| Civil Twilight | Sun is between -6° and -0.833° |
| Day | Sun is above -0.833° |
| Attribute | Description |
|---|---|
rising |
True if sun is rising |
blue_hour |
True if sun is between -6° and -4° |
golden_hour |
True if sun is between -4° and 6° |
sun2:
- unique_id: home
binary_sensors:
- unique_id: bs1
elevation: horizon
- unique_id: bs2
elevation: 3
- unique_id: bs3
elevation: -6
name: Above Civil Dawn
sensors:
- unique_id: s1
time_at_elevation: 10
- unique_id: s2
time_at_elevation: -10
direction: setting
icon: mdi:weather-sunset-down
name: Setting past 10 deg below horizon
- unique_id: s3
elevation_at_time: '12:00'
name: Elv @ noon
- unique_id: s4
elevation_at_time: input_datetime.test
name: Elv @ test var
- unique_id: london
location: London
latitude: 51.50739529645933
longitude: -0.12767666584664272
time_zone: Europe/London
elevation: 11
binary_sensors:
- unique_id: bs1
elevation
- unique_id: bs2
elevation: 3
- unique_id: bs3
elevation: -6
name: Above Civil Dawn
sensors:
- unique_id: s1
time_at_elevation: 10
- unique_id: s2
time_at_elevation: -10
direction: setting
icon: mdi:weather-sunset-down
name: Setting past 10 deg below horizon
- unique_id: s3
elevation_at_time: '12:00'
name: Elv @ noon
- unique_id: s4
elevation_at_time: input_datetime.test
name: Elv @ test varIn previous versions, configuration was done under binary_sensor & sensor.
This is now deprecated and will generate a warning at startup.
It should be converted to the new sun2 format as described above.
Here is an example of the old format:
binary_sensor:
- platform: sun2
entity_namespace: London
latitude: 51.50739529645933
longitude: -0.12767666584664272
time_zone: Europe/London
elevation: 11
monitored_conditions:
- elevation:
above: -6
name: Above Civil Dawn
sensor:
- platform: sun2
monitored_conditions:
- dawn
- sunrise
- sunset
- dusk
- elevation_at_time: input_datetime.arrival
name: Elv @ arrival
- time_at_elevation: -10
direction: setting
icon: mdi:weather-sunset-down
name: Setting past 10 deg below horizonThis is the equivalent configuration in the new format:
sun2:
- unique_id: london
location: London
latitude: 51.50739529645933
longitude: -0.12767666584664272
time_zone: Europe/London
elevation: 11
binary_sensors:
- unique_id: bs1
elevation: -6
name: Above Civil Dawn
- unique_id: home
sensors:
- unique_id: s1
elevation_at_time: input_datetime.arrival
name: Elv @ arrival
- unique_id: s2
time_at_elevation: -10
direction: setting
icon: mdi:weather-sunset-down
name: Setting past 10 deg below horizonAll "simple" sensor options (e.g., sunrise, sunset, etc.) will be created automatically.
Some will be enabled by default, but most will not.
Simply go to the Settings -> Devices & services page, click on Sun2, then entities, and enable/disable the entities as desired.