Creates sensors that provide information about various sun related events.
Follow the installation instructions below. Then add one or more locations with desired sensors either via YAML, the UI or both.
With HACS
You can use HACS to manage the installation and provide update notifications.
-
Add this repo as a custom repository. It should then appear as a new integration. Click on it. If necessary, search for "sun2".
https://github.com/pnbruckner/ha-sun2
Or use this button:
-
Download the integration using the appropriate button.
Manual
Place a copy of the files from custom_components/sun2
in <config>/custom_components/sun2
,
where <config>
is your Home Assistant configuration directory.
NOTE: When downloading, make sure to use the
Raw
button from each file's page.
After it has been downloaded you will need to restart Home Assistant.
This custom integration supports HomeAssistant versions 2023.4.0 or newer.
Reloads Sun2 from the YAML-configuration. Also adds SUN2
to the Developers Tools -> YAML page.
Responds with the current location configuration options (latitude, etc.) of the specified location.
Takes just one parameter, location
, which is the name of the location, and is also the name of the corresponding integration entry.
Updates one or more parts of the location configuration options of the specified location.
Takes one required parameter, location
. (Same as sun2.get_location
service.)
Can also take location parameters (latitude
, longitude
& time_zone
), which if any are specified, they must all be specified.
Can also take observer elevation parameters (obeserver_elevation
).
These parameters are the same as specified below in the YAML configuration section.
One or more "locations" can be added for this integration. Each location is defined by a set of parameters (latitude, etc.) Sensors will be created for each location that provide sun related data for that location. A location can be added either via the UI or YAML.
To add a location via the UI, you can use this My Button:
Alternatively, go to Settings -> Devices & services and click the + ADD INTEGRATION
button.
Find or search for "sun2", click on it, then follow the prompts.
The remainder of this section defines the list of YAML configuration options for each location.
Key | Optional | Description |
---|---|---|
unique_id |
no | Unique identifier for location. This allows any of the remaining options to be changed without looking like a new location. |
location |
yes* | Name of location |
latitude |
yes* | The location's latitude (in degrees) |
longitude |
yes* | The location's longitude (in degrees) |
time_zone |
yes* | The location's time zone. (See the "TZ database name" column at https://en.wikipedia.org/wiki/List_of_tz_database_time_zones.) |
observer_elevation |
yes | What affects sunrise & sunset as defined here |
binary_sensors |
yes | Binary sensor configurations as defined here |
sensors |
yes | Sensor configurations as defined here |
* These must all be used together. If not used, the default is Home Assistant's location, time zone & name configuration.
The easterly sun events (sunrise, dawn, etc.) and westerly sun events (sunset, dusk, etc.) can be viewed at either the horizon, or at the top of some obstruction, such as a mountain. (For more details, see Effect of Elevation.) This configuration option describes which apply at the specified location.
There are two basic choices. The first is that the sun events are seen at the horizon in both directions. In this case, a simple number may be given which defines the observer's elevation above ground level (not sea level) in meters. If this option is not specified, a default of zero is used.
The second choice is specifying an obstruction in one or both directions (sunrise_obstruction
and/or sunset_obstruction
).
For each used, the horizontal distance to the obstruction (distance
),
and the height of the top of the obstruction, relative to the observer (relative_height
), must be specified.
Note that the relative height can be negative (e.g., the observer is on an even taller mountain.)
If only one is used, then the observer's elevation above ground level (above_ground
) must also be specified (for the other direction.)
Here are some examples:
observer_elevation: 5
observer_elevation:
sunrise_obstruction: {distance: 10000, relative_height: 2000}
sunset_obstruction: {distance: 5000, relative_height: -100}
observer_elevation:
above_ground: 0
sunrise_obstruction: {distance: 10000, relative_height: 2000}
Note that this replaces the
elevation
option used in previous versions.
A list of one or more of the following.
'on'
when sun's elevation is above threshold, 'off'
when at or below threshold.
Key | Optional | Description |
---|---|---|
unique_id |
no | Unique identifier for entity. Must be unique within set of binary sensors for location. This allows any of the remaining options to be changed without looking like a new entity. |
elevation |
no | Elevation threshold (in degrees) or horizon |
name |
yes | Entity friendly name |
For example, this:
- unique_id: bs1
elevation: horizon
Would be equivalent to:
- unique_id: bs1
elevation: -0.833
name: Above horizon
A list of one or more of the following.
Key | Optional | Description |
---|---|---|
unique_id |
no | Unique identifier for entity. Must be unique within set of sensors for location. This allows any of the remaining options to be changed without looking like a new entity. |
time_at_elevation |
no | Elevation (in degrees) |
direction |
yes | rising (default) or setting |
icon |
yes | Default is mdi:weather-sunny |
name |
yes | Entity friendly name |
For example, this:
- unique_id: s1
time_at_elevation: -0.833
Would be equivalent to:
- unique_id: s1
time_at_elevation: -0.833
direction: rising
icon: mdi:weather-sunny
name: Rising at minus 0.833 °
Key | Optional | Description |
---|---|---|
unique_id |
no | Unique identifier for entity. Must be unique within set of sensors for location. This allows any of the remaining options to be changed without looking like a new entity. |
elevation_at_time |
no | Time string or input_datetime entity ID |
name |
yes | Entity friendly name |
When using an input_datetime
entity it must have the time component. The date component is optional.
If the date is not present, the result will be the sun's elevation at the given time on the current date.
If the date is present, it will be used and the result will be the sun's elevation at the given time on the given date.
Also in this case, the sensor
entity will not have yesterday
, today
and tomorrow
attributes.
Besides the sensors described above, the following will also be created automatically. Simply enable or disable these entities as desired.
Some of these will be enabled by default. The rest will be disabled by default.
Type | Enabled | Description |
---|---|---|
Solar Midnight | yes | The time when the sun is at its lowest point closest to 00:00:00 of the specified date; i.e. it may be a time that is on the previous day. |
Astronomical Dawn | no | The time in the morning when the sun is 18 degrees below the horizon |
Nautical Dawn | no | The time in the morning when the sun is 12 degrees below the horizon |
Dawn | yes | The time in the morning when the sun is 6 degrees below the horizon |
Rising | yes | AKA Sunrise. The time in the morning when the sun is 0.833 degrees below the horizon. This is to account for refraction. |
Solar Noon | yes | The time when the sun is at its highest point |
Setting | yes | AKA Sunset. The time in the evening when the sun is 0.833 degrees below the horizon. This is to account for refraction. |
Dusk | yes | The time in the evening when the sun is a 6 degrees below the horizon |
Nautical Dusk | no | The time in the evening when the sun is a 12 degrees below the horizon |
Astronomical Dusk | no | The time in the evening when the sun is a 18 degrees below the horizon |
These are all disabled by default.
Type | Description |
---|---|
Daylight | The amount of time between sunrise and sunset |
Civil Daylight | The amount of time between dawn and dusk |
Nautical Daylight | The amount of time between nautical dawn and nautical dusk |
Astronomical Daylight | The amount of time between astronomical dawn and astronomical dusk |
Night | The amount of time between sunset and sunrise of the next day |
Civil Night | The amount of time between dusk and dawn of the next day |
Nautical Night | The amount of time between nautical dusk and nautical dawn of the next day |
Astronomical Night | The amount of time between astronomical dusk and astronomical dawn of the next day |
These are also all disabled by default.
Type | Description |
---|---|
Azimuth | The sun's azimuth (degrees) |
Rising Azimuth | The sun's azimuth at sunrise (degrees) |
Setting Azimuth | The sun's azimuth at sunset (degrees) |
Elevation | The sun's elevation (degrees) |
Minimum Elevation | The sun's elevation at solar midnight (degrees) |
maximum Elevation | The sun's elevation at solar noon (degrees) |
deCONZ Daylight | Emulation of deCONZ Daylight Sensor |
Phase | See Sun Phase Sensor |
State | Description |
---|---|
Night | Sun is below -18° |
Astronomical Twilight | Sun is between -18° and -12° |
Nautical Twilight | Sun is between -12° and -6° |
Civil Twilight | Sun is between -6° and -0.833° |
Day | Sun is above -0.833° |
Attribute | Description |
---|---|
rising |
True if sun is rising |
blue_hour |
True if sun is between -6° and -4° |
golden_hour |
True if sun is between -4° and 6° |
sun2:
- unique_id: home
binary_sensors:
- unique_id: bs1
elevation: horizon
- unique_id: bs2
elevation: 3
- unique_id: bs3
elevation: -6
name: Above Civil Dawn
sensors:
- unique_id: s1
time_at_elevation: 10
- unique_id: s2
time_at_elevation: -10
direction: setting
icon: mdi:weather-sunset-down
name: Setting past 10 deg below horizon
- unique_id: s3
elevation_at_time: '12:00'
name: Elv @ noon
- unique_id: s4
elevation_at_time: input_datetime.test
name: Elv @ test var
- unique_id: london
location: London
latitude: 51.50739529645933
longitude: -0.12767666584664272
time_zone: Europe/London
elevation: 0
binary_sensors:
- unique_id: bs1
elevation
- unique_id: bs2
elevation: 3
- unique_id: bs3
elevation: -6
name: Above Civil Dawn
sensors:
- unique_id: s1
time_at_elevation: 10
- unique_id: s2
time_at_elevation: -10
direction: setting
icon: mdi:weather-sunset-down
name: Setting past 10 deg below horizon
- unique_id: s3
elevation_at_time: '12:00'
name: Elv @ noon
- unique_id: s4
elevation_at_time: input_datetime.test
name: Elv @ test var
All "simple" sensor options (e.g., dawn
, daylight
, etc.) will be created automatically.
Some will be enabled by default, but most will not.
Simply go to the Settings -> Devices & services page, click on Sun2, then entities, and enable/disable the entities as desired.