Upload Method

[sstaub]

It seems that the upload works with copy the firmware file to the mbed disc. On a Mac you
get some message because of unregulary unmounting the board.
It would be better to upload directly via cmsis-dap? like on the mbed lpc1768 board,
this would avoid the unmounting messages of the mbed disc.

[ivankravets]

Do you experience a similar issue with other mbed-enabled boards?

[sstaub]

Yes, longer times ago (more than a year) I have the same issue with mbed lpc1768 board, but you found a solution with the upload method, not using the mbed disc. stefan

…

Am 21.06.2017 um 22:19 schrieb Ivan Kravets ***@***.***>: Do you experience a similar issue with other mbed-enabled boards? — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#1 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AGJslQCeov1_VoLs7UVWZjeAi6Eq-gcuks5sGXrNgaJpZM4OBaeW>.

[ivankravets]

We use the same method (copying to media disk) for NXP LPC, see https://github.com/platformio/platform-nxplpc/blob/develop/builder/main.py#L138

It seems that disk disappears when new firmware is copied. Honestly, that is correct behavior. Board goes to reboot...

[sstaub]

I tested the same code with my mbed lpc 1768 board, and there is no warning about incorrect unmounting, curious. I see that the upload code is the same. Another difference is that the wiznet board resets automatic, the mbed lpc1768 needs a manual reset, really curious. I can live with that issue. stefan

…

Am 21.06.2017 um 22:28 schrieb Ivan Kravets ***@***.***>: We use the same method (copying to media disk) for NXP LPC, see https://github.com/platformio/platform-nxplpc/blob/develop/builder/main.py#L138 <https://github.com/platformio/platform-nxplpc/blob/develop/builder/main.py#L138> It seems that disk disappears when new firmware is copied. Honestly, that is correct behavior. Board goes to reboot... — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#1 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AGJslU4V_L7FpEX_vGPkNxAktoP05SZDks5sGXzkgaJpZM4OBaeW>.