Driver for the Xbox/ Xbox 360/ Xbox 360 Wireless/ Xbox One Controllers

This driver includes the latest changes in the upstream linux kernel and additionally carries the following staging changes:

• support for more compatible devices
• support for xbox360 class controllers, that need initialisation
• support Guitar Hero Live xbox one controller

This driver is only used if you connect the controller via USB.

Connecting via Bluetooth
If you get past the pairing issues, the controller will operate in the generic-HID bluetooth profile.
The xpad driver will not be used.

Connecting via XBox One Wireless Adapter (WiFi)
The adapter needs daemon in userspace, see: medusalix/xow
Opinion: rather get a controller that supports bluetooth.

sudo git clone https://github.com/paroj/xpad.git /usr/src/xpad-0.4
sudo dkms install -m xpad -v 0.4

cd /usr/src/xpad-0.4
sudo git fetch
sudo git checkout origin/master
sudo dkms remove -m xpad -v 0.4 --all
sudo dkms install -m xpad -v 0.4

sudo dkms remove -m xpad -v 0.4 --all
sudo rm -rf /usr/src/xpad-0.4

This driver creates three devices for each attached gamepad

1. /dev/input/jsN
   • example jstest /dev/input/js0
2. /sys/class/leds/xpadN/brightness
   • example echo COMMAND > /sys/class/leds/xpad0/brightness where COMMAND is one of
     • 0: off
     • 1: all blink, then previous setting
     • 2: 1/top-left blink, then on
     • 3: 2/top-right blink, then on
     • 4: 3/bottom-left blink, then on
     • 5: 4/bottom-right blink, then on
     • 6: 1/top-left on
     • 7: 2/top-right on
     • 8: 3/bottom-left on
     • 9: 4/bottom-right on
     • 10: rotate
     • 11: blink, based on previous setting
     • 12: slow blink, based on previous setting
     • 13: rotate with two lights
     • 14: persistent slow all blink
     • 15: blink once, then previous setting
3. the generic event device
   • example fftest /dev/input/by-id/usb-*360*event*

As a regular unpriveledged user

Setup console to display kernel log.
dmesg --level=debug --follow

Open a new console and access the device with jstest.
jstest /dev/input/jsX

Interact with the device and observe that data packets recieved from device are printed to kernel log.

[ 3968.772128] xpad-dbg: 00000000: 20 00 b5 0e 00 00 00 00 00 00 0c 03 04 fd 6c 01 40 fe 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3968.772135] xpad-dbg: 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3968.804137] xpad-dbg: 00000000: 20 00 b6 0e 00 00 00 00 00 00 0c 03 04 fd 6c 01 fc fd 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3968.804145] xpad-dbg: 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3969.152120] xpad-dbg: 00000000: 20 00 b7 0e 00 00 00 00 00 00 0c 03 04 fd 6c 01 b8 fd 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3969.152129] xpad-dbg: 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Save dmesg buffer and attach to bug report, don't forget to describe button sequences in bug report.
dmesg --level=debug > dmesg.txt

Ctrl+C to close interactive console sessions when finished.

1. git format-patch --cover-letter upstream..master
2. git send-email --to xxx *.patch