-
Notifications
You must be signed in to change notification settings - Fork 116
Home
- Web: oxen.io
- Telegram: t.me/OxenCommunity
- Mail: [email protected]
- GitHub: https://github.com/oxen-io/oxen-core
- Discord: https://discord.gg/67GXfD6
- Check out our Vulnerability Response Process, encourages prompt disclosure of any Vulnerabilities
Oxen is a private cryptocurrency based on Monero. Oxen currently offers an incentivised full node layer, over the coming months we will be looking to support a secondary p2p network (Lokinet) and a messenger that offers private communications based on the Signal protocol (Session).
More information on the project can be found on the website and in the whitepaper.
Oxen is an open source project, and we encourage contributions from anyone with something to offer. For more information on contributing, please contact [email protected]
The following table summarizes the tools and libraries required to build. A
few of the libraries are also included in this repository (marked as
"Vendored"). By default, the build uses the library installed on the system,
and ignores the vendored sources. However, if no library is found installed on
the system, then the vendored source will be built and used. The vendored
sources are also used for statically-linked builds because distribution
packages often include only shared library binaries (.so
) but not static
library archives (.a
).
Dep | Min. version | Vendored | Debian/Ubuntu pkg | Arch pkg | Fedora | Optional | Purpose |
---|---|---|---|---|---|---|---|
GCC | 8.1.0 | NO |
g++ [1] |
base-devel |
gcc |
NO | |
CMake | 3.10 | NO | cmake |
cmake |
cmake |
NO | |
pkg-config | any | NO | pkg-config |
base-devel |
pkgconf |
NO | |
Boost | 1.65 | NO |
libboost-all-dev [2] |
boost |
boost-devel |
NO | C++ libraries |
OpenSSL | basically any | NO | libssl-dev |
openssl |
openssl-devel |
NO | sha256 sum |
libzmq | 4.3.0 | YES | libzmq3-dev |
zeromq |
zeromq-devel |
NO | ZeroMQ library |
sqlite3 | ? | YES | libsqlite3-dev |
sqlite |
sqlite-devel |
NO | Oxen Name System |
libunbound | 1.4.16 | NO | libunbound-dev |
unbound |
unbound-devel |
NO | DNS resolver |
libsodium | 1.0.9 | YES | libsodium-dev |
libsodium |
libsodium-devel |
NO | cryptography |
libcurl | 4.0 | NO | libcurl4-openssl-dev |
curl |
curl-devel |
NO | HTTP RPC |
libuv (Win) | any | NO | (Windows only) | -- | -- | NO | RPC event loop |
libunwind | any | NO | libunwind8-dev |
libunwind |
libunwind-devel |
YES | Stack traces |
liblzma | any | NO | liblzma-dev |
xz |
xz-devel |
YES | For libunwind |
libreadline | 6.3.0 | NO | libreadline-dev |
readline |
readline-devel |
YES | Input editing |
ldns | 1.6.17 | NO | libldns-dev |
ldns |
ldns-devel |
YES | SSL toolkit |
expat | 1.1 | NO | libexpat1-dev |
expat |
expat-devel |
YES | XML parsing |
Doxygen | any | NO | doxygen |
doxygen |
doxygen |
YES | Documentation |
Graphviz | any | NO | graphviz |
graphviz |
graphviz |
YES | Documentation |
Qt tools | 5.x | NO | qttools5-dev |
qt5-tools |
qt5-linguist |
YES | Translations |
libhidapi | ? | NO | libhidapi-dev |
hidapi |
hidapi-devel |
YES | Hardware wallet |
libusb | ? | NO | libusb-dev |
libusb |
libusb-devel |
YES | Hardware wallet |
libprotobuf | ? | NO | libprotobuf-dev |
protobuf |
protobuf-devel |
YES | Hardware wallet |
protoc | ? | NO | protobuf-compiler |
protobuf |
protobuf-compiler |
YES | Hardware wallet |
[1] On Ubuntu Bionic you will need the g++-8 package instead of g++ (which is version 7) and will
need to run export CC=gcc-8 CXX=g++-8
before running make
or cmake
.
[2] libboost-all-dev includes a lot of unnecessary packages; see the apt command below for a breakdown of the minimum set of required boost packages.
Install all dependencies at once on Debian/Ubuntu:
sudo apt update && sudo apt install build-essential cmake pkg-config libboost-all-dev libssl-dev libzmq3-dev libunbound-dev libsodium-dev libunwind8-dev liblzma-dev libreadline6-dev libldns-dev libexpat1-dev doxygen graphviz libpgm-dev libsqlite3-dev libcurl4-openssl-dev
Install all dependencies at once on macOS with the provided Brewfile:
brew update && brew bundle --file=contrib/brew/Brewfile
FreeBSD one liner for required to build dependencies
pkg install git gmake cmake pkgconf boost-libs libzmq4 libsodium sqlite3 openssl unbound miniupnpc
Oxen uses the CMake build system which is used by creating a build directory and invoke cmake before building.
You do not have to build from source if you are on debian or ubuntu as we have apt repositories with pre-built oxen packages on deb.oxen.io
.
You can install these using:
$ sudo curl -so /etc/apt/trusted.gpg.d/oxen.gpg https://deb.oxen.io/pub.gpg
$ echo "deb https://deb.oxen.io $(lsb_release -sc) main" | sudo tee /etc/apt/sources.list.d/oxen.list
$ sudo apt update
$ sudo apt install oxend
if you want to build a dev build you can do the following after installing the dependancies above:
$ git clone --recursive https://github.com/oxen-io/oxen-core.git
$ cd oxen-core
$ git submodule update --init --recursive
$ mkdir build
$ cd build
$ cmake ..
$ make -j$(nproc)
-
The resulting executables can be found in
~/oxen-core/build/bin
-
Add
PATH="$PATH:$HOME/oxen-core/build/bin"
to.profile
-
Run Oxen with
oxend --detach
-
Optional: build and run the test suite to verify the binaries:
make release-test
NOTE:
core_tests
test may take a few hours to complete. -
Optional: to build binaries suitable for debugging:
make debug
-
Optional: to build statically-linked binaries:
make release-static
Dependencies need to be built with -fPIC. Static libraries usually aren't, so you may have to build them yourself with -fPIC. Refer to their documentation for how to build them.
-
Optional: build documentation in
doc/html
(omitHAVE_DOT=YES
ifgraphviz
is not installed):HAVE_DOT=YES doxygen Doxyfile
The build process is exactly the same, but note that some parts of the build require around 3GB of RAM which is more memory than most Raspberry Pi class devices have available. You can work around this by enabling 2GB (or more) of swap, but this is not particularly recommended, particularly if the swap file is on the SD card: intensive writes to a swap file on an SD card can accelerate how quickly the SD card wears out. Devices with 4GB of RAM (such as the 4GB model of the Pi 4B, and some other SBC ARM devices) can build without needing swap.
As an alternative, pre-built oxen debs are available for ARM32 and ARM64 for recent Debian/Raspbian/Ubuntu distributions and are often a much better alternative for SBC-class devices. If you still want to compile from source, ensure you have enough memory (or swap -- consult your OS documentation to learn how to enable or increase swap size) and follow the regular linux build instructions above.
Binaries for Windows are built on Windows using the MinGW toolchain within MSYS2 environment. The MSYS2 environment emulates a POSIX system. The toolchain runs within the environment and cross-compiles binaries that can run outside of the environment as a regular Windows application.
Preparing the build environment
-
Download and install the MSYS2 installer, either the 64-bit (x86_64) or the 32-bit (i686) package, depending on your system.
-
Note: Installation must be on the C drive and root directory as result of Monero issue 3167.
-
Open the MSYS shell via the
MSYS2 MSYS
shortcut in the Start Menu or "C:\msys64\msys2_shell.cmd -msys" -
Update packages using pacman:
pacman -Syu
-
Exit the MSYS shell using Alt+F4 when you get a warning stating: "terminate MSYS2 without returning to shell and check for updates again/for example close your terminal window instead of calling exit"
pacman -Syu
-
Update packages again using pacman:
pacman -Syu
-
Install dependencies:
To build for 64-bit Windows:
pacman -S git mingw-w64-x86_64-toolchain make mingw-w64-x86_64-cmake mingw-w64-x86_64-boost mingw-w64-x86_64-openssl mingw-w64-x86_64-zeromq mingw-w64-x86_64-libsodium mingw-w64-x86_64-hidapi mingw-w64-x86_64-sqlite3 mingw-w64-x86_64-unbound
To build for 32-bit Windows:
pacman -S git mingw-w64-i686-toolchain make mingw-w64-i686-cmake mingw-w64-i686-boost mingw-w64-i686-openssl mingw-w64-i686-zeromq mingw-w64-i686-libsodium mingw-w64-i686-hidapi mingw-w64-i686-sqlite3 mingw-w64-i686-unbound
-
Close and reopen the MSYS MinGW shell via
MSYS2 MinGW 64-bit
shortcut on 64-bit Windows orMSYS2 MinGW 32-bit
shortcut on 32-bit Windows. Note that if you are running 64-bit Windows, you will have both 64-bit and 32-bit MinGW shells.
Cloning
-
To git clone, run:
git clone --recursive https://github.com/oxen-io/oxen-core.git
Building
-
Change to the cloned directory, run:
cd oxen-core
-
If you would like a specific version/tag, do a git checkout for that version. eg. 'v5.1.2'. If you don't care about the version and just want binaries from master, skip this step:
git checkout v5.1.2
-
If you are on a 64-bit system, run:
make release-static-win64
-
If you are on a 32-bit system, run:
make release-static-win32
-
The resulting executables can be found in
build/<MinGW version>/<oxen version>/release/bin
-
Optional: to build Windows binaries suitable for debugging on a 64-bit system, run:
make debug-static-win64
-
Optional: to build Windows binaries suitable for debugging on a 32-bit system, run:
make debug-static-win32
-
The resulting executables can be found in
build/<MinGW version>/<oxen version>/debug/bin
The project can be built from scratch by following instructions for Linux above(but use gmake
instead of make
).
If you are running Oxen in a jail, you need to add sysvsem="new"
to your jail configuration, otherwise lmdb will throw the error message: Failed to open lmdb environment: Function not implemented
.
You will need to add a few packages to your system. pkg_add cmake gmake zeromq cppzmq libiconv boost
.
The doxygen
and graphviz
packages are optional and require the xbase set.
Running the test suite also requires py-requests
package.
Build oxen: env DEVELOPER_LOCAL_TOOLS=1 BOOST_ROOT=/usr/local gmake release-static
Note: you may encounter the following error, when compiling the latest version of oxen as a normal user:
LLVM ERROR: out of memory
c++: error: unable to execute command: Abort trap (core dumped)
Then you need to increase the data ulimit size to 2GB and try again: ulimit -d 2000000
The default Solaris linker can't be used, you have to install GNU ld, then run cmake manually with the path to your copy of GNU ld:
mkdir -p build/release
cd build/release
cmake -DCMAKE_LINKER=/path/to/ld -D CMAKE_BUILD_TYPE=Release ../..
cd ../..
Then you can run make as usual.
# Build image (for ARM 32-bit)
docker build -f utils/build_scripts/android32.Dockerfile -t oxen-android .
# Build image (for ARM 64-bit)
docker build -f utils/build_scripts/android64.Dockerfile -t oxen-android .
# Create container
docker create -it --name oxen-android oxen-android bash
# Get binaries
docker cp oxen-android:/src/build/release/bin .
By default, in either dynamically or statically linked builds, binaries target the specific host processor on which the build happens and are not portable to other processors. Portable binaries can be built using the following targets:
-
make release-static-linux-x86_64
builds binaries on Linux on x86_64 portable across POSIX systems on x86_64 processors -
make release-static-linux-i686
builds binaries on Linux on x86_64 or i686 portable across POSIX systems on i686 processors -
make release-static-linux-armv8
builds binaries on Linux portable across POSIX systems on armv8 processors -
make release-static-linux-armv7
builds binaries on Linux portable across POSIX systems on armv7 processors -
make release-static-linux-armv6
builds binaries on Linux portable across POSIX systems on armv6 processors -
make release-static-win64
builds binaries on 64-bit Windows portable across 64-bit Windows systems -
make release-static-win32
builds binaries on 64-bit or 32-bit Windows portable across 32-bit Windows systems
You can also cross-compile static binaries on Linux for Windows and macOS with the depends
system.
-
make depends target=x86_64-linux-gnu
for 64-bit linux binaries. -
make depends target=x86_64-w64-mingw32
for 64-bit windows binaries.- Requires:
python3 g++-mingw-w64-x86-64 wine1.6 bc
- Requires:
-
make depends target=x86_64-apple-darwin11
for macOS binaries.- Requires:
cmake imagemagick libcap-dev librsvg2-bin libz-dev libbz2-dev libtiff-tools python-dev
- Requires:
-
make depends target=i686-linux-gnu
for 32-bit linux binaries.- Requires:
g++-multilib bc
- Requires:
-
make depends target=i686-w64-mingw32
for 32-bit windows binaries.- Requires:
python3 g++-mingw-w64-i686
- Requires:
-
make depends target=arm-linux-gnueabihf
for armv7 binaries.- Requires:
g++-arm-linux-gnueabihf
- Requires:
-
make depends target=aarch64-linux-gnu
for armv8 binaries.- Requires:
g++-aarch64-linux-gnu
- Requires:
-
make depends target=riscv64-linux-gnu
for RISC V 64 bit binaries.- Requires:
g++-riscv64-linux-gnu
- Requires:
The required packages are the names for each toolchain on apt. Depending on your distro, they may have different names.
Using depends
might also be easier to compile Oxen on Windows than using MSYS. Activate Windows Subsystem for Linux (WSL) with a distro (for example Ubuntu), install the apt build-essentials and follow the depends
steps as depicted above.
The produced binaries still link libc dynamically. If the binary is compiled on a current distribution, it might not run on an older distribution with an older installation of libc. Passing -DBACKCOMPAT=ON
to cmake will make sure that the binary will run on systems having at least libc version 2.17.
Pre-built packages are available for recent Debian and Ubuntu systems (and are often usable on Debian or Ubuntu-derived Linux distributions). For more details see https://deb.imaginary.stream
You can also build a docker package using:
```bash
# Build using all available cores
docker build -t oxen-daemon-image .
# or build using a specific number of cores (reduce RAM requirement)
docker build --build-arg NPROC=1 -t oxen .
# either run in foreground
docker run -it -v /oxen/chain:/root/.oxen -v /oxen/wallet:/wallet -p 22022:22022 oxen
# or in background
docker run -it -d -v /oxen/chain:/root/.oxen -v /oxen/wallet:/wallet -p 22022:22022 oxen
```
- The build needs 3 GB space.
- Wait one hour or more. For docker, the collect_from_docker_container.sh script will automate downloading the binaries from the docker container.
The build places the binary in bin/
sub-directory within the build directory
from which cmake was invoked (repository root by default). To run in
foreground:
./bin/oxend
To list all available options, run ./bin/oxend --help
. Options can be
specified either on the command line or in a configuration file passed by the
--config-file
argument. To specify an option in the configuration file, add
a line with the syntax argumentname=value
, where argumentname
is the name
of the argument without the leading dashes, for example log-level=1
.
To run in background:
./bin/oxend --log-file oxend.log --detach
To run as a systemd service, copy
oxend.service to /etc/systemd/system/
and
oxend.conf to /etc/
. The example
service assumes that the user oxen
exists
and its home is the data directory specified in the example
config.
If you're on Mac, you may need to add the --max-concurrency 1
option to
oxen-wallet-cli, and possibly oxend, if you get crashes refreshing.
See README.i18n.md.
There is a new, still experimental, integration with Tor. The feature allows connecting over IPv4 and Tor simulatenously - IPv4 is used for relaying blocks and relaying transactions received by peers whereas Tor is used solely for relaying transactions received over local RPC. This provides privacy and better protection against surrounding node (sybil) attacks.
While Oxen isn't made to integrate with Tor, it can be used wrapped with torsocks, by setting the following configuration parameters and environment variables:
-
--p2p-bind-ip 127.0.0.1
on the command line orp2p-bind-ip=127.0.0.1
in oxend.conf to disable listening for connections on external interfaces. -
--no-igd
on the command line orno-igd=1
in oxend.conf to disable IGD (UPnP port forwarding negotiation), which is pointless with Tor. -
DNS_PUBLIC=tcp
orDNS_PUBLIC=tcp:https://x.x.x.x
where x.x.x.x is the IP of the desired DNS server, for DNS requests to go over TCP, so that they are routed through Tor. When IP is not specified, oxend uses the default list of servers defined in src/common/dns_utils.cpp. -
TORSOCKS_ALLOW_INBOUND=1
to tell torsocks to allow oxend to bind to interfaces to accept connections from the wallet. On some Linux systems, torsocks allows binding to localhost by default, so setting this variable is only necessary to allow binding to local LAN/VPN interfaces to allow wallets to connect from remote hosts. On other systems, it may be needed for local wallets as well. - Do NOT pass
--detach
when running through torsocks with systemd, (see utils/systemd/oxend.service for details). - If you use the wallet with a Tor daemon via the loopback IP (eg, 127.0.0.1:9050),
then use
--untrusted-daemon
unless it is your own hidden service.
Example command line to start oxend through Tor:
DNS_PUBLIC=tcp torsocks oxend --p2p-bind-ip 127.0.0.1 --no-igd
TAILS ships with a very restrictive set of firewall rules. Therefore, you need to add a rule to allow this connection too, in addition to telling torsocks to allow inbound connections. Full example:
sudo iptables -I OUTPUT 2 -p tcp -d 127.0.0.1 -m tcp --dport 22023 -j ACCEPT
DNS_PUBLIC=tcp torsocks ./oxend --p2p-bind-ip 127.0.0.1 --no-igd --rpc-bind-ip 127.0.0.1 \
--data-dir /home/amnesia/Persistent/your/directory/to/the/blockchain
This section contains general instructions for debugging failed installs or problems encountered with Oxen. First ensure you are running the latest version built from the Github repo.
We generally use the tool gdb
(GNU debugger) to provide stack trace functionality, and ulimit
to provide core dumps in builds which crash or segfault.
- To use
gdb
in order to obtain a stack trace for a build that has stalled:
Run the build.
Once it stalls, enter the following command:
gdb /path/to/oxend `pidof oxend`
Type thread apply all bt
within gdb in order to obtain the stack trace
- If however the core dumps or segfaults:
Enter ulimit -c unlimited
on the command line to enable unlimited filesizes for core dumps
Enter echo core | sudo tee /proc/sys/kernel/core_pattern
to stop cores from being hijacked by other tools
Run the build.
When it terminates with an output along the lines of "Segmentation fault (core dumped)", there should be a core dump file in the same directory as oxend. It may be named just core
, or core.xxxx
with numbers appended.
You can now analyse this core dump with gdb
as follows:
gdb /path/to/oxend /path/to/dumpfile`
Print the stack trace with bt
- If a program crashed and cores are managed by systemd, the following can also get a stack trace for that crash:
coredumpctl -1 gdb
Type gdb /path/to/oxend
Pass command-line options with --args
followed by the relevant arguments
Type run
to run oxend
There are two tools available:
Configure Oxen with the -D SANITIZE=ON cmake flag, eg:
cd build/debug && cmake -D SANITIZE=ON -D CMAKE_BUILD_TYPE=Debug ../..
You can then run the oxen tools normally. Performance will typically halve.
Install valgrind and run as valgrind /path/to/oxend
. It will be very slow.
Instructions for debugging suspected blockchain corruption as per @HYC
There is an mdb_stat
command in the LMDB source that can print statistics about the database but it's not routinely built. This can be built with the following command:
cd ~/oxen/external/db_drivers/liblmdb && make
The output of mdb_stat -ea <path to blockchain dir>
will indicate inconsistencies in the blocks, block_heights and block_info table.
The output of mdb_dump -s blocks <path to blockchain dir>
and mdb_dump -s block_info <path to blockchain dir>
is useful for indicating whether blocks and block_info contain the same keys.
These records are dumped as hex data, where the first line is the key and the second line is the data.
Because of the nature of the socket-based protocols that drive Oxen, certain protocol weaknesses are somewhat unavoidable at this time. While these weaknesses can theoretically be fully mitigated, the effort required (the means) may not justify the ends. As such, please consider taking the following precautions if you are a Oxen node operator:
- Run
oxend
on a "secured" machine. If operational security is not your forte, at a very minimum, have a dedicated a computer runningoxend
and do not browse the web, use email clients, or use any other potentially harmful apps on youroxend
machine. Do not click links or load URL/MUA content on the same machine. Doing so may potentially exploit weaknesses in commands which accept "localhost" and "127.0.0.1". - If you plan on hosting a public "remote" node, start
oxend
with--restricted-rpc
. This is a must.
Certain blockchain "features" can be considered "bugs" if misused correctly. Consequently, please consider the following:
- When receiving Oxen, be aware that it may be locked for an arbitrary time if the sender elected to, preventing you from spending that Oxen until the lock time expires. You may want to hold off acting upon such a transaction until the unlock time lapses. To get a sense of that time, you can consider the remaining blocktime until unlock as seen in the
show_transfers
command.