RetDec is a retargetable machine-code decompiler based on LLVM.

The decompiler is not limited to any particular target architecture, operating system, or executable file format:

• Supported file formats: ELF, PE, Mach-O, COFF, AR (archive), Intel HEX, and raw machine code
• Supported architectures:
  • 32-bit: Intel x86, ARM, MIPS, PIC32, and PowerPC
  • 64-bit: x86-64, ARM64 (AArch64)

Features:

• Static analysis of executable files with detailed information.
• Compiler and packer detection.
• Loading and instruction decoding.
• Signature-based removal of statically linked library code.
• Extraction and utilization of debugging information (DWARF, PDB).
• Reconstruction of instruction idioms.
• Detection and reconstruction of C++ class hierarchies (RTTI, vtables).
• Demangling of symbols from C++ binaries (GCC, MSVC, Borland).
• Reconstruction of functions, types, and high-level constructs.
• Integrated disassembler.
• Output in two high-level languages: C and a Python-like language.
• Generation of call graphs, control-flow graphs, and various statistics.

For more information, check out our

• Wiki (in progress)
• Botconf 2017 talk: slides, video
• REcon Montreal 2018 talk: slides
• Publications

Currently, we support Windows (7 or later), Linux, macOS, and (experimentally) FreeBSD. An installed version of RetDec requires approximately 4 GB of free disk space.

1. Either download and unpack a pre-built package, or build and install the decompiler by yourself (the process is described below).

2. Install Microsoft Visual C++ Redistributable for Visual Studio 2015.

3. Install the following programs:

   • Python (version >= 3.4)
   • UPX (Optional: if you want to use UPX unpacker in the preprocessing stage)
   • Graphviz (Optional: if you want to generate call or control flow graphs)

4. Now, you are all set to run the decompiler. To decompile a binary file named test.exe, run the following command (ensure that python runs Python 3; as an alternative, you can try py -3)

   python $RETDEC_INSTALL_DIR/bin/retdec-decompiler.py test.exe
   

   For more information, run retdec-decompiler.py with --help.

1. Either download and unpack a pre-built package, or build and install the decompiler by yourself (the process is described below).

2. After you have built the decompiler, you will need to install the following packages via your distribution's package manager:

   • Python (version >= 3.4)
   • UPX (Optional: if you want to use UPX unpacker in the preprocessing stage)
   • Graphviz (Optional: if you want to generate call or control flow graphs)

3. Now, you are all set to run the decompiler. To decompile a binary file named test.exe, run

   $RETDEC_INSTALL_DIR/bin/retdec-decompiler.py test.exe
   

   For more information, run retdec-decompiler.py with --help.

1. Either download and unpack a pre-built package, or build and install the decompiler by yourself (the process is described below).

2. After you have built the decompiler, you will need to install the following packages:

   • Python (version >= 3.4)
   • UPX (Optional: if you want to use UPX unpacker in the preprocessing stage)
   • Graphviz (Optional: if you want to generate call or control flow graphs)

3. Now, you are all set to run the decompiler. To decompile a binary file named test.exe, run

   $RETDEC_INSTALL_DIR/bin/retdec-decompiler.py test.exe
   

   For more information, run retdec-decompiler.py with --help.

1. There are currently no pre-built "ports" packages for FreeBSD. You will have to build and install the decompiler by yourself. The process is described below.

2. After you have built the decompiler, you may need to install the following packages and execute the following command:

   sudo pkg install python37
   sudo ln -s /usr/local/bin/python3.7 /usr/local/bin/python3
   

3. Now, you are all set to run the decompiler. To decompile a binary file named test.exe, run

   $RETDEC_INSTALL_DIR/bin/retdec-decompiler.py test.exe
   

   For more information, run retdec-decompiler.py with --help.

This section describes a local build and installation of RetDec. Instructions for Docker are given in the next section.

• A C++ compiler and standard C++ library supporting C++14 (e.g. GCC >= 5)
• CMake (version >= 3.6)
• Git
• Perl
• Python (version >= 3.4)
• Bison (version >= 3.0)
• Flex (version >= 2.6)
• autotools (autoconf, automake, and libtool)
• pkg-config
• m4
• zlib
• Optional: Doxygen and Graphviz for generating API documentation

On Debian-based distributions (e.g. Ubuntu), the required packages can be installed with apt-get:

sudo apt-get install build-essential cmake git perl python3 bison flex libfl-dev autoconf automake libtool pkg-config m4 zlib1g-dev upx doxygen graphviz

On RPM-based distributions (e.g. Fedora), the required packages can be installed with dnf:

sudo dnf install gcc gcc-c++ cmake make git perl python3 bison flex autoconf automake libtool pkg-config m4 zlib-devel upx doxygen graphviz

On Arch Linux, the required packages can be installed with pacman:

sudo pacman --needed -S base-devel cmake git perl python3 bison flex autoconf automake libtool pkg-config m4 zlib upx doxygen graphviz

• Microsoft Visual C++ (version >= Visual Studio 2015 Update 2)
• CMake (version >= 3.6)
• Git
• Flex + Bison (mirror) from the Win flex-bison project. Add the extracted directory to the system Path (HOWTO).
• Active Perl. It needs to be the first Perl in PATH, or it has to be provided to CMake using CMAKE_PROGRAM_PATH variable, e.g. -DCMAKE_PROGRAM_PATH=/c/perl/bin. Does NOT work with Strawberry Perl or MSYS2 Perl (you would have to install a pre-built version of OpenSSL, see below).
  • Alternatively, you can install OpenSSL directly from here. This means OpenSSL won't be built and you don't need to install any Perl. Do not install Light version of OpenSSL as they don't contain development files.
• Python (version >= 3.4)
• Optional: Doxygen and Graphviz for generating API documentation

Packages should be preferably installed via Homebrew.

• Full Xcode installation (including command-line tools, see #425 and #433)
• CMake (version >= 3.6)
• Git
• Perl
• Python (version >= 3.4)
• Bison (version >= 3.0)
• Flex (version >= 2.6)
• autotools (autoconf, automake, and libtool)
• Optional: Doxygen and Graphviz for generating API documentation

Packages should be installed via FreeBSDs pre-compiled package repository using the pkg command or built from scratch using the ports database method.

• Full "pkg" tool instructions: handbook pkg method
  • pkg install cmake python37 bison git autotools OR
• Full "ports" instructions: handbook ports method
  • portsnap fetch
  • portsnap extract
• For example, cmake would be
  • whereis cmake
  • cd /usr/ports/devel/cmake
  • make install clean

Note: Although RetDec now supports a system-wide installation (#94), unless you use your distribution's package manager to install it, we recommend installing RetDec locally into a designated directory. The reason for this is that uninstallation will be easier as you will only need to remove a single directory. To perform a local installation, run cmake with the -DCMAKE_INSTALL_PREFIX=<path> parameter, where <path> is directory into which RetDec will be installed (e.g. $HOME/projects/retdec-install on Linux and macOS, and C:\projects\retdec-install on Windows).

• Clone the repository:
  • git clone https://github.com/avast/retdec
• Linux:
  • cd retdec
  • mkdir build && cd build
  • cmake .. -DCMAKE_INSTALL_PREFIX=<path>
  • make -jN (N is the number of processes to use for parallel build, typically number of cores + 1 gives fastest compilation time)
  • make install
• Windows:
  • Open a command prompt (e.g. cmd.exe)
  • cd retdec
  • mkdir build && cd build
  • cmake .. -DCMAKE_INSTALL_PREFIX=<path> -G<generator>
  • cmake --build . --config Release -- -m
  • cmake --build . --config Release --target install
  • Alternatively, you can open retdec.sln generated by cmake in Visual Studio IDE
• macOS:
  • cd retdec
  • mkdir build && cd build

  • # Apple ships old Flex & Bison, so Homebrew versions should be used.
    export CMAKE_INCLUDE_PATH="/usr/local/opt/flex/include"
    export CMAKE_LIBRARY_PATH="/usr/local/opt/flex/lib;/usr/local/opt/bison/lib"
    export PATH="/usr/local/opt/flex/bin:/usr/local/opt/bison/bin:$PATH"

  • cmake .. -DCMAKE_INSTALL_PREFIX=<path>
  • make -jN (N is the number of processes to use for parallel build, typically number of cores + 1 gives fastest compilation time)
  • make install
• FreeBSD:
  • sudo pkg install git cmake
  • git clone https://github.com/avast/retdec
  • cd retdec
  • mkdir build && cd build

  • # FreeBSD (and other BSDs) do need cmake, python3, bison, git, autotools. Flex and perl are pre-installed in the OS but check versions.
    # Later versions may be available for each of the packages.
    # See what is installed:
    sudo pkg info cmake python37 bison autotools
    # Install/upgrade them:
    sudo pkg install cmake python37 bison autotools

  • cmake .. -DCMAKE_INSTALL_PREFIX=<path>
  • make -jN (N is the number of processes to use for parallel build, typically number of cores + 1 gives fastest compilation time)
  • make install

You have to pass the following parameters to cmake:

• -DCMAKE_INSTALL_PREFIX=<path> to set the installation path to <path>. Quote the path if you are using backslashes on Windows (e.g. -DCMAKE_INSTALL_PREFIX="C:\retdec").
• (Windows only) -G<generator> is -G"Visual Studio 14 2015" for 32-bit build using Visual Studio 2015, or -G"Visual Studio 14 2015 Win64" for 64-bit build using Visual Studio 2015. Later versions of Visual Studio may be used.

You can pass the following additional parameters to cmake:

• -DRETDEC_DOC=ON to build with API documentation (requires Doxygen and Graphviz, disabled by default).
• -DRETDEC_TESTS=ON to build with tests (disabled by default).
• -DRETDEC_DEV_TOOLS=ON to build with development tools (disabled by default).
• -DRETDEC_FORCE_OPENSSL_BUILD=ON to force OpenSSL build even if it is installed in the system (disabled by default).
• -DRETDEC_COMPILE_YARA=OFF to disable YARA rules compilation at installation step (enabled by default).
• -DCMAKE_BUILD_TYPE=Debug to build with debugging information, which is useful during development. By default, the project is built in the Release mode. This has no effect on Windows, but the same thing can be achieved by running cmake --build . with the --config Debug parameter.
• -DCMAKE_PROGRAM_PATH=<path> to use Perl at <path> (probably useful only on Windows).
• -D<dep>_LOCAL_DIR=<path> where <dep> is from {CAPSTONE, ELFIO, GOOGLETEST, JSONCPP, KEYSTONE, LIBDWARF, LLVM, PELIB, RAPIDJSON, TINYXML, YARACPP, YARAMOD} (e.g. -DCAPSTONE_LOCAL_DIR=<path>), to use the local repository clone at <path> for RetDec dependency instead of downloading a fresh copy at build time. Multiple such options may be used at the same time.

Docker support is maintained by community. If something does not work for you or if you have suggestions for improvements, open an issue or PR.

Building in Docker does not require installation of the required libraries locally. This is a good option for trying out RetDec without setting up the whole build toolchain.

To build the RetDec Docker image, run

docker build -t retdec - < Dockerfile

This builds the image from the master branch of this repository.

To build the image using the local copy of the repository, use the development Dockerfile, Dockerfile.dev:

docker build -t retdec:dev . -f Dockerfile.dev

If your uid is not 1000, make sure that the directory containing your input binary files is accessible for RetDec:

chmod 0777 /path/to/local/directory

Now, you can run the decompiler inside a container:

docker run --rm -v /path/to/local/directory:/destination retdec retdec-decompiler.py /destination/binary

Note: Do not modify the /destination part is. You only need to change /path/to/local/directory. Output files will then be generated to /path/to/local/directory.

Our TeamCity servers are continuously generating up-to-date RetDec packages from the latest commit in the master branch. These are mostly meant to be used by RetDec developers, contributors, and other people experimenting with the product (e.g. testing if an issue present in the official release still exists in the current master).

You can use these as you wish, but keep in mind that there are no guarantees they will work on your system (especially the Linux version), and that regressions are a possibility. To get a stable RetDec version, either download the latest official pre-built package or build the latest RetDec version tag.

• Windows Server 2016, version 10.0
• Ubuntu Bionic Linux, version 18.04
• Mac OS X, version 10.13.4

This repository contains the following libraries:

• ar-extractor - library for extracting object files from archives (based on LLVM).
• bin2llvmir - library of LLVM passes for translating binaries into LLVM IR modules.
• capstone2llvmir - binary instructions to LLVM IR translation library.
• config - library for representing and managing RetDec configuration databases.
• cpdetect - library for compiler and packer detection in binaries.
• crypto - collection of cryptographic functions.
• ctypes - C++ library for representing C function data types.
• debugformat - library for uniform representation of DWARF and PDB debugging information.
• demangler - demangling library capable to handle names generated by the GCC/Clang, Microsoft Visual C++, and Borland C++ compilers.
• dwarfparser - library for high-level representation of DWARF debugging information.
• fileformat - library for parsing and uniform representation of various object file formats. Currently supporting the following formats: COFF, ELF, Intel HEX, Mach-O, PE, raw data.
• llvm-support - set of LLVM related utility functions.
• llvmir-emul - LLVM IR emulation library used for unit testing.
• llvmir2hll - library for translating LLVM IR modules to high-level source codes (C, Python-like language).
• loader - library for uniform representation of binaries loaded to memory. Supports the same formats as fileformat.
• macho-extractor - library for extracting regular Mach-O binaries from fat Mach-O binaries (based on LLVM).
• patterngen - binary pattern extractor library.
• pdbparser - Microsoft PDB files parser library.
• stacofin - static code finder library.
• unpacker - collection of unpacking functions.
• utils - general C++ utility library.

This repository contains the following tools:

• ar-extractortool - frontend for the ar-extractor library (installed as retdec-ar-extractor).
• bin2llvmirtool - frontend for the bin2llvmir library (installed as retdec-bin2llvmir).
• bin2pat - tool for generating patterns from binaries (installed as retdec-bin2pat).
• capstone2llvmirtool - frontend for the capstone2llvmir library (installed as retdec-capstone2llvmir).
• configtool - frontend for the config library (installed as retdec-config).
• ctypesparser - C++ library for parsing C function data types from JSON files into ctypes representation (installed as retdec-ctypesparser).
• demangler_grammar_gen -- tool for generating new grammars for the demangler library (installed as retdec-demangler-grammar-gen).
• demanglertool -- frontend for the demangler library (installed as retdec-demangler).
• fileinfo - binary analysis tool. Supports the same formats as fileformat (installed as retdec-fileinfo).
• idr2pat - tool for extracting patterns from IDR knowledge bases (installed as retdec-idr2pat).
• llvmir2hlltool - frontend for the llvmir2hll library (installed as retdec-llvmir2hll).
• macho-extractortool - frontend for the macho-extractor library (installed as retdec-macho-extractor).
• pat2yara - tool for processing patterns to YARA signatures (installed as retdec-pat2yara).
• stacofintool - frontend for the stacofin library (installed as retdec-stacofin).
• unpackertool - plugin-based unpacker (installed as retdec-unpacker).

This repository contains the following scripts:

• retdec-decompiler.py - the main decompilation script binding it all together. This is the tool to use for full binary-to-C decompilations.
• Support scripts used by retdec-decompiler.py:
  • retdec-color-c.py - decorates output C sources with IDA color tags - syntax highlighting for IDA.
  • retdec-config.py - decompiler's configuration file.
  • retdec-archive-decompiler.py - decompiles objects in the given AR archive.
  • retdec-fileinfo.py - a Fileinfo tool wrapper.
  • retdec-signature-from-library-creator.py - extracts function signatures from the given library.
  • retdec-unpacker.py - tries to unpack the given executable file by using any of the supported unpackers.
  • retdec-utils.py - a collection of Python utilities.
• retdec-tests-runner.py - run all tests in the unit test directory.
• type_extractor - generation of type information (for internal use only)

See the project documentation for an up to date Doxygen-generated software reference corresponding to the latest commit in the master branch.

• retdec-idaplugin -- Embeds RetDec into IDA (Interactive Disassembler) and makes its use much easier.
• retdec-regression-tests-framework -- A framework for writing and running regression tests for RetDec and related tools. This is a must if you plan to contribute to the RetDec project.
• retdec-regression-tests -- A suite of regression tests for RetDec and related tools.
• vim-syntax-retdecdsm -- Vim syntax-highlighting file for the output from the RetDec's disassembler (.dsm files).

Copyright (c) 2017 Avast Software, licensed under the MIT license. See the LICENSE file for more details.

RetDec uses third-party libraries or other resources listed, along with their licenses, in the LICENSE-THIRD-PARTY file.

See RetDec contribution guidelines.

This software was supported by the research funding TACR (Technology Agency of the Czech Republic), ALFA Programme No. TA01010667.