Skip to content

openshift-integration/camel-k-example-basic

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

63 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Camel K Basic Example

This example demonstrates how to get started with Camel K by showing you some of the most important features that you should know before trying to develop more complex examples.

Preparing the cluster

This example can be run on any OpenShift 4.3+ cluster or a local development instance (such as CRC). Ensure that you have a cluster available and login to it using the OpenShift oc command line tool.

You need to create a new project named camel-basic for running this example. This can be done directly from the OpenShift web console or by executing the command oc new-project camel-basic on a terminal window.

You need to install the Camel K operator in the camel-basic project. To do so, go to the OpenShift 4.x web console, login with a cluster admin account and use the OperatorHub menu item on the left to find and install "Red Hat Integration - Camel K". You will be given the option to install it globally on the cluster or on a specific namespace. If using a specific namespace, make sure you select the camel-basic project from the dropdown list. This completes the installation of the Camel K operator (it may take a couple of minutes).

When the operator is installed, from the OpenShift Help menu ("?") at the top of the WebConsole, you can access the "Command Line Tools" page, where you can download the "kamel" CLI, that is required for running this example. The CLI must be installed in your system path.

Refer to the "Red Hat Integration - Camel K" documentation for a more detailed explanation of the installation steps for the operator and the CLI.

You can use the following section to check if your environment is configured properly.

Checking requirements

OpenShift CLI ("oc")

The OpenShift CLI tool ("oc") will be used to interact with the OpenShift cluster.

Connection to an OpenShift cluster

You need to connect to an OpenShift cluster in order to run the examples.

Apache Camel K CLI ("kamel")

Apart from the support provided by the VS Code extension, you also need the Apache Camel K CLI ("kamel") in order to access all Camel K features.

Optional Requirements

The following requirements are optional. They don't prevent the execution of the demo, but may make it easier to follow.

VS Code Extension Pack for Apache Camel

The VS Code Extension Pack for Apache Camel by Red Hat provides a collection of useful tools for Apache Camel K developers, such as code completion and integrated lifecycle management. They are recommended for the tutorial, but they are not required.

You can install it from the VS Code Extensions marketplace.

1. Preparing the project

We'll connect to the camel-basic project and check the installation status.

To change project, open a terminal tab and type the following command:

oc project camel-basic

We should now check that the operator is installed. To do so, execute the following command on a terminal:

Upon successful creation, you should ensure that the Camel K operator is installed:

oc get csv

When Camel K is installed, you should find an entry related to red-hat-camel-k-operator in phase Succeeded.

You can now proceed to the next section.

2. Running a basic integration

This repository contains a simple Camel K integration that periodically prints a "Hello World..." message.

The integration is all contained in a single file named Basic.java.

Note: the Basic.java file contains a simple integration that uses the timer and log components. Dependency management is automatically handled by Camel K that imports all required libraries from the Camel catalog via code inspection. This means you can use all 300+ Camel components directly in your routes.

We're ready to run the integration on our camel-basic project in the cluster.

Use the following command to run it in "dev mode", in order to see the logs in the integration terminal:

kamel run Basic.java --dev

If everything is ok, after the build phase finishes, you should see the Camel integration running and continuously printing "Hello World!..." in the terminal window.

When running in dev mode, you can change the integration code and let Camel K redeploy the changes automatically.

To try this feature, open the Basic.java file and change "Hello World" into "Ciao Mondo", then save the file. You should see the new integration starting up in the terminal window and replacing the old one.

To exit dev mode and terminate the execution, hit ctrl+c on the terminal window.

Note: When you terminate a "dev mode" execution, also the remote integration will be deleted. This gives the experience of a local program execution, but the integration is actually running in the remote cluster.

To keep the integration running and not linked to the terminal, you can run it without "dev mode", just run:

kamel run Basic.java

After executing the command, you should be able to see it among running integrations:

oc get integrations

An integration named basic should be present in the list, and it should be in status Running. There's also a kamel get command which is an alternative way to list all running integrations.

Note: the first time you've run the integration, an IntegrationKit (basically, a container image) has been created for it and it took some time for this phase to finish. When you run the integration a second time, the existing IntegrationKit is reused (if possible) and the integration reaches the "Running" state much faster.

Even if it's not running in dev mode, you can still see the logs of the integration using the following command:

kamel log basic

The last parameter ("basic") is the name of the running integration for which you want to display the logs.

To terminate the log stream, hit ctrl+c on the terminal window.

Note: Your IDE may provide an "Apache Camel K Integrations" panel where you can see the list of running integrations and also open a window to display the logs.

2. Applying configuration and routing

The second example is a bit more complex as it shows how to configure the integration using external properties and also a simple content-based router.

The integration is contained in a file named Routing.java.

The routes use two configuration properties named items and priority-marker that should be provided using an external file such as the routing.properties.

The Routing.java file shows how to inject properties into the routes via property placeholders and also the usage of the @PropertyInject annotation.

To run the integration, we should link the integration to the property file providing configuration for it:

kamel run Routing.java --property=file:routing.properties --dev

Wait for the integration to be running (you should see the logs streaming in the terminal window).

You can now open both the Routing.java file or the routing.properties file, make some changes and see the integration redeployed. For example, change the word door with *door to see it sent to the priority queue.

To exit dev mode and terminate the execution, hit ctrl+c on the terminal window.

This will also terminate the execution of the integration.

3. Running integrations as Kubernetes CronJobs

The previous example can be automatically deployed as a Kubernetes CronJob if the delay between executions is changed into a value that can be expressed by a cron tab expression.

For example, you can change the first endpoint (timer:java?period=3000) into the following: timer:java?period=60000 (1 minute between executions). Open the Routing.java file to apply the changes.

Now you can run the integration again:

kamel run Routing.java --property=file:routing.properties

Now you'll see that Camel K has materialized a cron job:

oc get cronjob

You'll find a Kubernetes CronJob named "routing".

The running behavior changes, because now there's no pod always running (beware you should not store data in memory when using the cronJob strategy).

You can see the pods starting and being destroyed by watching the namespace:

oc get pod -w

To exit the current command, hit ctrl+c on the terminal window.

To see the logs of each integration starting up, you can use the kamel log command:

kamel log routing

You should see every minute a JVM starting, executing a single operation and terminating.

To exit the current command, hit ctrl+c on the terminal window.

The CronJob behavior is controlled via a Trait called cron. Traits are the main way to configure high level Camel K features, to customize how integrations are rendered.

To disable the cron feature and use the deployment strategy, you can run the integration with:

kamel run Routing.java --property=file:routing.properties -t cron.enabled=false

This will disable the cron trait and restore the classic behavior (always running pod).

You should see it reflected in the logs (which will be printed every minute by the same JVM):

kamel log routing

To exit the current command, hit ctrl+c on the terminal window.

You can continue to hack on the examples.

4. Uninstall

To clean up everything, execute the following command:

oc delete project camel-basic

About

No description, website, or topics provided.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published