BLE to MQTT gateway for Xiaomi MI Temperature and Humidity Sensor with BLE and LCD and other devices
- LYWSDCGQ (Xiaomi Mijia Bluetooth Hygrometer Thermometer)
- LYWSD02 (Xiaomi Mijia Wireless Clock Indoor & Outdoor Hygrometer Thermometer)
- LYWSD03MMC (XIAOMI Mijia Bluetooth Thermometer Hygrometer)
- CGG1 (ClearGrass Bluetooth Thermometer and Hygrometer)
- CGD1 (Cleargrass (Qingping) alarm clock)
- MHO-C303 (Xiaomi MiJia Miaomiaoce Wireless Hygrometer Therometer Clock)
- MHO-C401 (Xiaomi MiJia Miaomiaoce Bluetooth Hygrometer Thermometer)
- JQJCY01YM (Xiaomi Honeywell Formaldehyde Sensor)
- Use my partition table from the file default.csv
| Name | Type | SubType | Offset | Size | Flags |
|---|---|---|---|---|---|
| nvs | data | nvs | 0x9000 | 0x5000 | |
| otadata | data | ota | 0xe000 | 0x2000 | |
| app0 | app | ota_0 | 0x10000 | 0x190000 | |
| app1 | app | ota_1 | 0x200000 | 0x190000 | |
| eeprom | data | 0x99 | 0x390000 | 0x1000 | |
| spiffs | data | spiffs | 0x391000 | 0x6F000 |
- You can use my default.bin or use command
gen_esp32part.exe -q "partitions/default.csv" "partitions/default.bin"to generate your binary partition table file. You also can change file names default.csv and default.bin to yours.
- Open file
[ARDUINO_DIR]/hardware/espressif/esp32/boards.txtand find your board [YOUR_BOARD].upload.maximum_size=1310720: replace 1310720 to 1672864 for your board- If you changed default partitions name to your name use it:
[YOUR_BOARD].build.partitions=[YOUR_PARTITIONS]
Xiaomi and Mi are registered trademarks of BEIJING XIAOMI TECHNOLOGY CO., LTD.
This project is in no way affiliated with, authorized, maintained, sponsored or endorsed by Xiaomi or any of its affiliates or subsidiaries.
This software was designed to be used only for research purposes. This software comes with no warranties of any kind whatsoever, and may not be useful for anything. Use it at your own risk! If these terms are not acceptable, you aren't allowed to use the code.
This project is licensed under the GNU General Public License v3.0 - see the LICENSE file for details