add Minivan FR4 plate Case

03 - Cases/Minivan Plate Case/README.md

@@ -0,0 +1,39 @@
+# Minivan Universal Southpaw FR4 Case Plate (PCB Material)
+
+![mvfr4](https://raw.githubusercontent.com/The-Royal/The_Royal_Open-Source-Projects/schwann/xfile-data/minivan_fr4_cap.png)
+
+![mvfr4bp](https://raw.githubusercontent.com/The-Royal/The_Royal_Open-Source-Projects/schwann/xfile-data/minivan_fr4_baseplate_cap.png)
+
+---
+
+***PLEASE NOTE:*** This specific switch plate is only compatible with the following layout configurations:
+
+![mvfr4](https://raw.githubusercontent.com/The-Royal/The_Royal_Open-Source-Projects/schwann/xfile-data/minivan_fr4_layouts.png)
+
+---
+
+### Exact PCB Dimensions (Both PCBs Exact Same Size):
+
+- **242.9x76.2mm**
+
+These work the same way ordering PCBs does. Just upload the provided gerbers to your manu. of choice.
+
+### Hardware Required:
+
+- **x7** /// M2x5mm or M2x8mm Standoffs *(respectively)*
+- **x14** /// M2x4mm or M2x5mm Screws *(respectively)*
+
+Standoffs Mount to Base Plate, and then mount to underside of PCB. Holes in Switch plate allow for easy access to screw locations. Height of total case depends on size of spacers used and is user pref.
+
+---
+---
+
+ ### Thank You To Everyone for Making these projects possible!
+
+- I’m always down for a nice coffee, beer, or cup of tea. 
+- Click my Buymeacoffee link below if you wanted to make a small tip donation <3
+- Even just these little donation are so, very much, appreciated. These really Help me to keep these little projects going and to keep them open source for you guys. 
+
+<a href="https://www.buymeacoffee.com/xQnlh8tRs" target="_blank"><img src="https://www.buymeacoffee.com/assets/img/custom_images/orange_img.png" alt="Buy Me A Coffee" style="height: 41px !important;width: 174px !important;box-shadow: 0px 3px 2px 0px rgba(190, 190, 190, 0.5) !important;-webkit-box-shadow: 0px 3px 2px 0px rgba(190, 190, 190, 0.5) !important;" ></a>
+
+