# Download a copy of this repository
$ wget https://github.com/fwestenberg/reolink/archive/master.zip
# Unzip the archive
$ unzip master.zip
# Move the reolink_dev directory into your custom_components directory in your Home Assistant install
$ mv reolink-master/custom_components/reolink_dev <home-assistant-install-directory>/config/custom_components/- Click on HACS in the Home Assistant menu
- Click on
Integrations - Click the top right menu (the three dots)
- Select
Custom repositories - Paste the repository URL (
https://github.com/fwestenberg/reolink) in the dialog box - Select category
Integration - Click
Add - Click
Installon the Reolink IP camera box that has now appeared
- Add the following to your
configuration.yaml:
camera:
- platform: reolink_dev
host: IP_ADDRESS
username: admin
password: YOUR_PASSWORD
name: frontdoor (optional, default Reolink Camera)
stream: main or sub (optional, default main)
protocol: rtmp or rtsp (optional, default rtmp)
channel: NVR camera channel (optional, default 0)
scan_interval: 5 (optional, default 30s)
binary_sensor:
platform: template
sensors:
motion_frontdoor:
friendly_name: Camera frontdoor
device_class: motion
entity_id: camera.frontdoor
value_template: "{{ is_state('camera.frontdoor', 'motion') }}"
delay_off:
seconds: 30
switch:
- platform: template
switches:
camera_frontdoor_email:
value_template: "{{ is_state_attr('camera.frontdoor', 'email_enabled', true) }}"
turn_on:
service: camera.enable_email
data:
entity_id: camera.frontdoor
turn_off:
service: camera.disable_email
data:
entity_id: camera.frontdoor
icon_template: >-
{% if is_state_attr('camera.frontdoor', 'email_enabled', true) %}
mdi:email
{% else %}
mdi:email-outline
{% endif %}
camera_frontdoor_ftp:
value_template: "{{ is_state_attr('camera.frontdoor', 'ftp_enabled', true) }}"
turn_on:
service: camera.enable_ftp
data:
entity_id: camera.frontdoor
turn_off:
service: camera.disable_ftp
data:
entity_id: camera.frontdoor
icon_template: >-
{% if is_state_attr('camera.frontdoor', 'ftp_enabled', true) %}
mdi:filmstrip
{% else %}
mdi:filmstrip-off
{% endif %}
camera_frontdoor_ir_lights:
value_template: "{{ is_state_attr('camera.frontdoor', 'ir_lights_enabled', true) }}"
turn_on:
service: camera.enable_ir_lights
data:
entity_id: camera.frontdoor
turn_off:
service: camera.disable_ir_lights
data:
entity_id: camera.frontdoor
icon_template: >-
{% if is_state_attr('camera.frontdoor', 'ir_lights_enabled', true) %}
mdi:flashlight
{% else %}
mdi:flashlight-off
{% endif %}
camera_frontdoor_motion_detection:
value_template: "{{ is_state_attr('camera.frontdoor', 'motion_detection_enabled', true) }}"
turn_on:
service: camera.enable_motion_detection
data:
entity_id: camera.frontdoor
turn_off:
service: camera.disable_motion_detection
data:
entity_id: camera.frontdoor
icon_template: >-
{% if is_state_attr('camera.frontdoor', 'motion_detection_enabled', true) %}
mdi:motion-sensor
{% else %}
mdi:motion-sensor-off
{% endif %}- Restart Home Assistant.
In your Home Assistant Lovelace, add a new card with the following:
type: picture-glance
title: frontdoor
camera_image: camera.frontdoor
entities:
- switch.camera_frontdoor_ir_lights
- switch.camera_frontdoor_email
- switch.camera_frontdoor_ftp
- switch.camera_frontdoor_motion_detection
- binary_sensor.motion_frontdoorNow you will have a card the looks like this (notice the buttons and motion icon):
- B800
- B400
- D400
- E1
- E1 Pro
- Battery-powered camera's
- If the buttons are not working on the Lovelace card, make sure that the user that you configured in the Reolink camera is an administrator.