lets you create multiple clones of SD
cards and other media in parallel, which is nice if you have to deploy
massive amounts of SBC computers or other embedded gadgets. It provides
a web interface, so the machine running the card writers can be a headless
SBC such as a Raspberry Pi.
tarot is functional and used professionally by the author, but not tested outside a Raspberry Pi environment. Buyer beware.
Specifically, since tarot is about writing data to raw devices with root privileges, do not use it on an important system or on a system with important data devices connected to it.
You will need:
- systemd (this is the default init system on RaspiOS)
- dcfldd (it's ancient, but still lovingly maintained in Debian)
- lsblk (which is part of util-linux and available pretty much everywhere)
- a web server environment with PHP enabled (I'm using lighttpd)
- a command-line PHP environment for server-side tasks
The systemd requirement could be replaced by an inotify handler if you're so inclined. I like systemd.
tarot is being tested and developed on a Raspberry Pi 4B and a 13-way IcyBox USB3 hub containing 13 Transcend SD and µSD card reader/writers.
It is quite Linux-specific, but should run on any distribution and any platform.
If you are considering building a fast USB3 duplicator using the latest Raspberry Pi 4B (which is an excellent idea), keep in mind that there is a hard limit of 32 devices on any one USB controller, and that both USB3 ports on the Pi run on the same controller. In my case, I was trying to combine two IcyBox 13-port USB3 hubs, only to find that the system would recognize at most 17 out of 26 card readers, more or less randomly. This is due to the fact that the hub consists of several sub-hubs internally, which all eat up device slots. In the end, I built two Pis with one 13-port hub each, which works fine.
Update: The Pi5 has one USB3 controller for each of its blue ports, so it should be possible to run two hubs there, for twice the amount of ports.
All configuration is done in web/includes/config.php. Change as required.
You will need to run git submodule init ; git submodule update
after
checkout to fetch skeleton.
There is an install script that should work, and if it doesn't in your case, reading it will tell you what to do. Kindly open an issue if you run into one.
Specifically, the systemd service file templates need to be populated from the config file, and the person with the hammer will use PHP for that in a PHP project.
After installing, point your browser at http(s):https://*yourhost.net*/tarot
. You
will be asked to scan for image files in the image folder you selected, and
to scan for devices. Having selected exactly one image and one or more
devices, you can proceed to write the image to the device(s).
If by mistake you happen to revisit the page while a job is running, you
should be redirected to the appropriate screen.
Note that scanning does not happen automatically, because it would invalidate the selections you may have made before.
tarot tries very hard to prevent you from accidentally nuking your
important data partitions while detecting useful devices on-the-fly without
manual configuration. A server-side process will run lsblk
over all devices
and partitions, and parses candidate devices into a backend state object.
Devices will be offered as targets to write to if and only if:
- the device is not mounted
- none of its partitions are mounted
- it is not marked read-only
- it is marked as hot-pluggable
- its size is not zero
Likewise, the server will parse your image directory for a list of available images.
As you select or change images, the web UI will try to prevent you from writing to devices too small to hold the selected image, and will dynamically unselect devices if necessary. They will not be re-selected when you switch back to a smaller image.
tarot is single user and will try to ensure that only one IP ever accesses it, although it allows for explicit session stealing.
The tarot web interface has no authentication.
While you should only use it in a secure environment (don't want to expose dd to the world, do we?), it tries to be reasonably secure against mischief.
The only state data that is ever accepted from the web client is "selected/unselected". The corresponding target device lists are created on the server, and stored there in a global state object that can only be read by the web UI.
Also, since the actual writing has to be done as root
, the web environment
will only dump a magic trigger file to disk. The birth of this file is then
picked up by a systemd tarot.path
unit, which in turn activates
tarot.service
. It triggers a local process
web/bin/tarot_handler that runs with root
privileges.
This handler reads the user's choices from the state object, clears the
trigger file, and gets to work.
So while Eve could nuke all of Alice's hotplugged but unused devices easily, she will not be able to attack other storage. There is no real attack surface for privilege escalation from the web.
If you need to use tarot in an environment with untrusted users on the local network, it is trivial to lock down the
tarot/
path with a basic authentication/authorization mechanism provided by your web server.
You can pass ?debug
to the URL to enable some debugging features:
/dev/zero
will be made available as an "image"/dev/null
will be made available as a card device for dry-run testing- a button to reset the session IP, to test session stealing
- a button to forget the session state and start over
- add verifcation of images after writing
- implement partprobe if lsblk fails to find new devices
- implement uploading of new images (and here comes the attack surface for privilege escalation)
tarot has been inspired by Aaron Nguyen's osid-python3, which in turn draws on earlier work by Rock & Scissor. The web gui uses Skeleton.