Repo for smallstep to run as a CA for SCION CPPKI.

This repo contains the CA deployment. For the renewing part on the endhosts refer to the scionlab-cert-renewer

The CA Service can be configured in the .toml file of the control service in a SCION AS. There is a mode called "delegating" which makes the CS talk to an external CA Service via HTTP implementing this interface.

The initial setup consists of a few steps that need to be done before you can deploy your own CA.

Have a look at the .env file and configure the ISD-AS and the CA/AS information to your preferences.

Note: This step should be performed according to this documentation only for testing purposes. Please refer to Anapaya's official guide for TRC creation and signing ceremonies.

Create your root certs and TRCs via the following commands: cd ca-conf ./gen-trc.sh cd ..

Now create your step-ca and step-internal folders which will serve as root directory for your scion CA.

mkdir step-ca mkdir step-internal

Copy your root cert, key and your trc into step-ca. Root certs and keys are named the following ca-conf/ISD1-999.root.crt/key for ISD_AS 1-999. The TRC is ISD1-B1-S1.trc for this ISD-AS.

Now generate secrets that will be used for the CA and for communication between CS and CA:

Generate a jwt-secret by copying the jwt-secret.template from ca-conf to step-ca and insert a proper symmetric key via openssl rand -base64 256 and name it jwt-secret.pem. It will be used by the scion-step-proxy to sign JWT tokens.

Generate a shared secret by copying the shared-secret.pem.template from ca-conf to step-ca and insert a proper symmetric key via openssl rand -base64 256 and name it shared-secret.pem. It will be used by the CS to obtain JWT tokens from the scion-step-proxy.

Generate files that contain passwords for you SCION-ca in step-ca/scion.pw and for the internal CA step-internal/step-ca.pw.

Copy seeds.json from ca-conf into step-ca and add a random client id to your admin user.

Start by running the smallstep-cli-scion container that creates the initial configuration: docker-compose up -d smallstep-cli-scion

Check the log output if everything was done properly: docker-compose logs -f smallstep-cli-scion. It should print something like Your PKI is ready to go two times.

Note: I hope I can automate this step later, too.

You may need to change ownership of the step-ca/.step and step-internal/.step folders to your current user to edit files there.

sudo chown -R $USER step-ca/.step sudo chown -R $USER step-internal/.step

Add the leaf.tpl from ca-conf to step-ca/.step/templates.

Make the scion-ca use the specific template by adding the following lines into the config file step-ca/.step/config/ca.json (starting at line 23 into the provisioners object):

"options": {
    "x509": {
        "templateFile": "/root/.step/templates/leaf.tpl"
    }
},

Now configure the TLS cert duration to be longe than 24h: Add the following lines after the provisioners array (starting at line 40):

"claims": {
    "minTLSCertDuration": "5m",
    "maxTLSCertDuration": "1440h",
    "defaultTLSCertDuration": "24h"
}

Next step is to start your SCION CA by running docker-compose up -d smallstep-ca-scion. Again check the logs if everything is set up properly docker-compose logs -f smallstep-cli-scion.

Next, you need to start the SCION step proxy via docker-compose up -d scion-step-proxy.

To protect communication between the CS and the SCION step proxy, we propose to configure caddy as reverse-proxy to obtain certificates from your internal step-ca.

Run your internal CA by via docker-compose up -d step-ca.

Adapt the IP you want Caddy to listen on via HTTPS in the Caddyfile and also change the TLS email setting.

Next, trust the root cert of your step-internal CA step-internal/.step/certs/root_ca.crt either by following this guide (for Ubuntu) or use step for this sudo step-ca/step certificate install step-internal/.step/certs/root_ca.crt. Your updated trust store will then be linked into the caddy container

Now add acme support to your internal step-ca docker-compose exec step-ca step ca provisioner add acme --type ACME and docker-compose restart step-ca

Now run docker-compose up -d caddy. It should log that it is capable of obtaining a new cert from your step-internal instance.

In the CS, there is a section [ca] that needs to be configured the following way:

[ca]
mode = "delegating"

[ca.service]
shared_secret = "./step-ca/shared_key.pem" # Update to your location
addr = "https://127.0.0.1:443" # Point to caddys IP
client_id = "YOUR CLIENT ID"

This CA works the following way: To add a new AS to the ISD, at first create an initial AS certificate, later this certificate will be renewed automatically (see below for the configuration).

Start by copying a csr template for your ISD-AS you want to issue a certificate to the step-ca folder, e.g into step-ca/1-999.csr.tmpl for ISD 1 and AS 999. Change ISD-AS according to your settings in the tmpl.

Next, create a csr and a key via scion-pki: scion-pki certificate create --csr step-ca/1-999.csr.tmpl step-ca/1-999.as.csr step-ca/1-999.as.key.

This csr can now be signed via step-cli. The easiest way to do so is to run the sign command in the smallstep-cli-scion container:

docker-compose exec smallstep-cli-scion /bin/step ca sign --set isdAS=1-999 --provisioner-password-file=/etc/step-ca/scion-ca.pw --not-after=72h /etc/step-ca/1-999.as.csr /etc/step-ca/1-999.as.crt --ca-url=https://127.0.0.1:8443 --root=/etc/step-ca/.step/certs/root_ca.crt. Please change isdAS parameter and the paths to csr/crt in this command according to your settings.

You can now validate and verify your new cert in step-ca/1-999.as.crt:

scion-pki certificate validate --type chain step-ca/1-999.as.crt

scion-pki certificate verify --trc /etc/scion-ca/step-ca/ISD1-B1-S1.trc step-ca/1-999.as.crt

Both commands should result in no errors if everything is configured properly.

Renewing certs can be done via scion-pki:

scion-pki certs renew --trc step-ca/ISD1-B1-S2.trc step-ca/1-999.as.crt step-ca/1-999.as.key --out step-ca/1-999.as-renew.crt --out-key step-ca/1-999.as-renew.key

This command will automatically connect to your CS and renew the cert via the scion-step-proxy. You can now validate and verify the new certs again.

scion-pki certificate validate --type chain step-ca/1-999.as-renew.crt

scion-pki certificate verify --trc /etc/scion-ca/step-ca/ISD1-B1-S1.trc step-ca/1-999.as-renew.crt