A SAML 2.0 Service Provider Single-Sign-On Authentication library. This Plug library can be used to SAML enable a Plug/Phoenix application.

This has been used in the wild with the following Identity Providers:

• Okta
• Ping Identity
• OneLogin
• ADFS
• Nexus GO
• Shibboleth
• SimpleSAMLphp

Please send a note by DM if you have successfully used Samly with other Identity Providers.

This library uses Erlang esaml to provide plug enabled routes.

# mix.exs

# v1.0.0 uses esaml v4.2 which in turn relies on cowboy 2.x
# If you need to work with cowboy 1.x, you need the following override:
# {:esaml, "~> 3.7", override: true}

defp deps() do
  [
    # ...
    {:samly, "~> 1.0.0"},
  ]
end

Add Samly.Provider to your application supervision tree.

# application.ex

children = [
  # ...
  {Samly.Provider, []},
]

Make the following change in your application router.

# router.ex

# Add the following scope ahead of other routes
# Keep this as a top-level scope and **do not** add
# any plugs or pipelines explicitly to this scope.
scope "/sso" do
  forward "/", Samly.Router
end

Samly needs a private key and a corresponding certificate. These are used to sign the SAML requests when communicating with the Identity Provider. This certificate should be made available to Samly via config settings. It should also be made available to the Identity Provider so it can verify the SAML signed requests.

You can create a self-signed certificate for this purpose. You can use phx.gen.cert mix task that is available as part of Phoenix 1.4 or use openssl directly to generate the key and corresponding certificate. (Check out samly_howto README.md for this.)

Samly expects information about the Identity Provider including information about its SAML endpoints in an XML file. Most Identity Providers have some way of exporting the IdP metadata in XML form. Some may provide a web UI to export/save the XML locally. Others may provide a URL that can be used to fetch the metadata.

For example, SimpleSAMLPhp IdP provides a URL for the metadata. You can fetch it using wget.

wget --no-check-certificate -O idp1_metadata.xml https://idp1.samly:9091/simplesaml/saml2/idp/metadata.php

If you are using the SimpleSAMLPhp administrative Web UI, login with you admin credentials (https://idp1.samly:9091/simplesaml). Go to the Federation tab. At the top there will be a section titled "SAML 2.0 IdP Metadata". Click on the Show metadata link. Copy the metadata XML from this page and save it in a local file (idp1_metadata.xml for example).

Make sure to save this XML file and provide the path to the saved file in Samly configuration.

Samly has the ability to support multiple Identity Providers. All IdPs that Samly needs to talk to must have an identifier (idp_id). This IdP id will be used in the service provider URLs. This is how Samly figures out which SAML request corresponds to what IdP so that it can perform relevant validation checks and process the requests/responses.

There are two options when it comes to how the idp_id is represented in the Service Provider SAML URLs.

In this model, the idp_id is present as a URL path segment. Here is an example URL: https://do-good.org/sso/auth/signin/affiliates. The idp_id in this URL is "affiliates". If you have more than one IdP, only this last part changes. The URLs for this model are:

The path segment model is the default one in Samly. If there is only one Identity Provider, use this mode.

These URL routes are automatically created based on the configuration information and the above mentioned router scope definition.

Use the Sign-in and Sign-out URLs shown above in your application's Web UI buttons/links. When the end-user clicks on these buttons/links, the HTTP GET request is handled by Samly which internally does a POST that in turn sends the appropriate SAML request to the IdP.

In this model, the subdomain name is used as the idp_id. Here is an example URL: https://ngo.do-good.org/sso/auth/signin. Here ngo is the idp_id. The URLs supported by Samly in this model look different.

Take a look at samly_howto - a reference/demo application on how to use this library.

Make sure to use HTTPS URLs in production deployments.

The sign-in and sign-out URLs (HTTP GET) mentioned above optionally take a target_url query parameter. Samly will redirect the browser to these URLs upon successfuly completing the sign-in/sign-out operations initiated from your application.

This target_url query parameter value must be x-www-form-urlencoded.

# config/dev.exs

config :samly, Samly.Provider,
  idp_id_from: :path_segment,
  service_providers: [
    %{
      id: "do-good-affiliates-sp",
      entity_id: "urn:do-good.org:affiliates-app",
      certfile: "path/to/samly/certfile.pem",
      keyfile: "path/to/samly/keyfile.pem",
      #contact_name: "Affiliates Admin",
      #contact_email: "[email protected]",
      #org_name: "Do Good",
      #org_displayname: "Goodly, No evil!",
      #org_url: "https://do-good.org"
    }
  ],
  identity_providers: [
    %{
      id: "affiliates",
      sp_id: "do-good-affiliates-sp",
      base_url: "https://do-good.org/sso",
      metadata_file: "idp1_metadata.xml",
      #pre_session_create_pipeline: MySamlyPipeline,
      #use_redirect_for_req: false,
      #sign_requests: true,
      #sign_metadata: true,
      #signed_assertion_in_resp: true,
      #signed_envelopes_in_resp: true,
      #allow_idp_initiated_flow: false,
      #allowed_target_urls: ["https://do-good.org"],
      #nameid_format: :transient
    }
  ]

Samly internally maintains the authenticated SAML assertions (from LoginResponse SAML requests). There are two built-in state store options available - one based on ETS and the other on Plug Sessions. The ETS store can be setup using the following configuration:

config :samly, Samly.State,
  store: Samly.State.ETS,
  opts: [table: :my_ets_table]

This state configuration is optional. If omitted, Samly uses Samly.State.ETS provider by default.

Use Samly.State.Session provider in a clustered deployment. This provider uses the Plug Sessions to keep the authenticated SAML assertions.

This session based provider can be enabled using the following:

config :samly, Samly.State,
  store: Samly.State.Session,
  opts: [key: :my_assertion_key]

Once authentication is completed successfully, IdP sends a "consume" SAML request to Samly. Samly in-turn performs its own checks (including checking the integrity of the "consume" request). At this point, the SAML assertion with the authenticated user subject and attributes is available.

The subject in the SAML assertion is tracked by Samly so that subsequent logout/signout request, either service provider initiated or IdP initiated would result in proper removal of the corresponding SAML assertion.

Use the Samly.get_active_assertion function to get the SAML assertion for the currently authenticated user. This function will return nil if the user is not authenticated.

Avoid using the subject in the SAML assertion in UI. Depending on how the IdP is setup, this might be a randomly generated id.

You should only rely on the user attributes in the assertion. As an application working with an IdP, you should know which attributes will be made available to your application and out of those attributes which one should be treated as the logged in userid/name. For example it could be "uid" or "email" depending on how the authentication source is setup in the IdP.

Samly allows you to specify a Plug Pipeline if you need more control over the authenticated user's attributes and/or do a Just-in-time user creation. The Plug Pipeline is invoked after the user has successfully authenticated with the IdP but before a session is created.

This is just a vanilla Plug Pipeline. The SAML assertion from the IdP is made available in the Plug connection as a "private". (The pipeline plugs have access to the idp_id in this assertion.) If you want to derive new attributes, create an Elixir map data (%{}) and update the computed field of the SAML assertion and put it back in the Plug connection private with Conn.put_private call.

Here is a sample pipeline that shows this:

defmodule MySamlyPipeline do
  use Plug.Builder
  alias Samly.{Assertion}

  plug :compute_attributes
  plug :jit_provision_user

  def compute_attributes(conn, _opts) do
    assertion = conn.private[:samly_assertion]

    # This assertion has the idp_id
    # %Assertion{idp_id: idp_id} = assertion

    first_name = Map.get(assertion.attributes, "first_name")
    last_name  = Map.get(assertion.attributes, "last_name")

    computed = %{"full_name" => "#{first_name} #{last_name}"}

    assertion = %Assertion{assertion | computed: computed}

    conn
    |>  put_private(:samly_assertion, assertion)

    # If you have an error condition:
    # conn
    # |>  send_resp(404, "attribute mapping failed")
    # |>  halt()
  end

  def jit_provision_user(conn, _opts) do
    # your user creation here ...
    conn
  end
end

Make this pipeline available in your config:

config :samly, Samly.Provider,
  identity_providers: [
    %{
      # ...
      pre_session_create_pipeline: MySamlyPipeline,
      # ...    
    }
  ]

Take a look at the implementation of Samly.State.ETS or Samly.State.Session and use those as examples showing how to create your own state store (based on redis, memcached, database etc.).

• Samly initiated sign-in/sign-out requests send RelayState to IdP and expect to get that back. Mismatched or missing RelayState in IdP responses to SP initiated requests will fail (with HTTP 403 access_denied).
• Besides the RelayState, the request and response idp_ids must match. Reponse is rejected if they don't.
• Samly makes the original request ID that an auth response corresponds to in Samly.Subject.in_response_to field. It is the responsibility of the consuming application to use this information along with the validity period in the assertion to check for replay attacks. The consuming application should use the pre_session_create_pipeline to perform this check. You may need a database or a distributed cache such as memcache in a clustered setup to keep track of these request IDs for their validity period to perform this check. Be aware that in_response_to field is not set when IDP initialized authorization flow is used.
• OOTB SAML requests and responses are signed.
• Signature digest method supported: SHA256.

  Some Identity Providers may be using SHA1 by default. Make sure to configure the IdP to use SHA256. Samly will reject (access_denied) IdP responses using SHA1.

• esaml provides additional checks such as trusted certificate verification, recipient verification among others.
• By default, Samly signs the SAML requests it sends to the Identity Provider. It also expects the SAML reqsponses to be signed (both assertion and envelopes). If your IdP is not configured to sign, you will have to explicitly turn them off in the configuration. It is highly recommended to turn signing on in production deployments.
• Encypted Assertions are supported in Samly. There are no explicit config settings for this. Decryption happens automatically when encrypted assertions are detected in the SAML response.

  Supported Encryption algorithms

• Make sure to use HTTPS URLs in production deployments.

Docker based setup of SimpleSAMLPhp is made available at samly_simplesaml Git Repo. Check out the README.md file of this repo.

There is also a Docker based setup of Shibboleth. Checkout the corresponding README.md file in samly_shibboleth Git Repo.

Clone the samly_howto Git Repo. Detailed instructions on how to setup and run this application are available in the README.md file in this repo.

It is recommended that you use the SamlyHowto application to sort out any configuration issues by making that demo application work successfully with your Identity Provider (IdP) before attempting your application.

This demo application supports experimentation with multiple IdPs.

If you are using samly_simplesaml or samly_shibboleth, the instructions you followed there would take care of registering your Phoenix SAML Service provider appliccation. For any other IdP, follow the instructions from the respective IdP vendor.

access_denied {:error, :bad_recipient} - Check the base_url in your Samly config setting under indentity_providers.

access_denied {:error, :bad_audience} - Make sure that the entity_id in the Samly config setting is correct.

access_denied {:envelope, {:error, :cert_no_accepted}} - Make sure the Identity Provider metadata XML file you are using in the Samly config setting is correct and corresponds to the IdP you are attempting to talk to. You get this error if the certificate used by the IdP to sign the SAML responses has changed and you don't have the updated IdP metadata XML file on the Samly end.