This driver allows you to get and set the state of any control4 device by making an http request. The response is in JSON format.

I am using this (along with my homebridge-c4-plugin) to connect homekit to my control4. So I can say "Siri turn on Kitchen Lights" or "Siri is my garage door closed". You can use this with any other hub which supports making http requests.

• Get the current level of dimmer light: http:https://CONTROLLER_IP:9000/?command=get&proxyID=25&variableID=1001

Result: {"1001":"75"} which means the dimmer light with proxyID 25 is currently at 75%

• Update the current level of dimmer light: http:https://CONTROLLER_IP:9000/?command=set&proxyID=25&variableID=1001&newValue=100

Result: {"success":"true"}

• Get the current temperature set for thermostat: http:https://CONTROLLER_IP:9000/?command=get&proxyID=34&variableID=1132,1130

Result: {"1132":"68","1130":"67","success":"true"} which means the thermostat is set to 68F and current temperature is 67F

• Update the temperature of thermostat: http:https://CONTROLLER_IP:9000/?command=set&proxyID=34&variableID=1132&newValue=66

Result: {"success":"true"}

• Set mute state for a room (for some reason the ?command=set function above does not work for the IS_MUTED variable): http:https://CONTROLLER_IP:9000/?command=setmute&proxyID=34&newValue=1

Result: {"success":"true"}

• Get current values of variables for multiple rooms in one request: http:https://CONTROLLER_IP:9000/?command=getmulti&proxyID=46,54&variableID=1000,1010,1011,1018

Result: {"46":{"1000":"228","1010":"1","1011":"53","1018":"0"},"54":{"1000":"0","1010":"0","1011":"34","1018":"0"},"success":"true"}

• Get list of all variables for a device: http:https://CONTROLLER_IP:9000/?command=getvariables&proxyID=25

Result: {"1005":"MAX_ON_LEVEL","1006":"MIN_ON_LEVEL","1003":"CLICK_RAMP_RATE_DOWN","1007":"START_ON_LEVEL","1000":"LIGHT_STATE","1004":"PRESET_LEVEL","1008":"START_ON_TIME_MS","1001":"LIGHT_LEVEL","1002":"CLICK_RAMP_RATE_UP","success":"true"}

Sorry this is not currently easy to use :(. You will have to find the variableID and proxyID for each device you want to connect. I hope in future we can make it use device names and variable names instead of IDs.

• You need to either have access to ComposerPro or ask your dealer to install it for you.
• To find proxyID, mouse over the device or check info for the device.
• To find variableID, execute: for k,v in pairs(C4:GetDeviceVariables(34)) do print(k, v.name, v.value) end which will print all variables, their IDs and current values. Or use "?command=getvariables", described above.

This is completely unencrypted and unsecure. Anybody with access to your wifi will be able to control any of your control4 connected devices. So don't open it to internet and also make sure you have a secured wifi.