Every year I teach my students how to build paper circuits using templates from Chibitronics. For the first few projects they follow a template I give them so I know exactly how much copper tape each student needs. I made this machine to measure and cut the tape for me.

The parts, instructions, and more are available on Thingiverse: https://www.thingiverse.com/thing:3557719

This program uses these libraries:

• ArduinoMenu
• streamFlow
• TFT_eSPI - You will have to setup your TFT settings in the User_Setup.h file and I included my working setup for you
• ClickEncoder - This is a fork of the library ArduinoMenu uses by default and both need the "#include <avr/..." lines commented out in ClickEncoder.h if you are using an ESP32
• AccelStepper
• ESP32Servo
• EEPROM32 Rotate

Due to how EEPROM32_Rotate creates custom partitions, I switched over from Arduino IDE to VS Code with PlatformIO. Although the learning curve was steeper, in a few hours I felt comfortable and started to appreciate the Here is an overview of how to get started by Paul O'Brian and the PlatformIO Install Guide and Quick Start.