ethereum-gas-workshop

references

preface

goals of this workshop
- introduction to EMV
- understanding gas pricing model
- showing standard gas optimisation techniques
workshop task
- improve Inefficient.sol
  1. replace compareStrings with keccak256
  2. use correct qualifiers: view, calldata, etc
  3. use correct data structure: mapping

EVM = Ethereum Virtual Machine

refresh: virtual machine
- is a type of simulation of a CPU
- has predefined operations, but such operations must be understood by the virtual machine and not by the CPU
- is a program capable of interpreting a specific language
  - transforming (indirectly) this language into machine language
  - executing what needs to be executed on the CPU.
- language that the virtual machine understands is called bytecode
  - each virtual machine has its own bytecode with its own definitions
  - bytecode is a series of instructions that the EVM will interpret and execute
  - when we write a smart contract in Solidity or Vyper, the result must be transformed (compiled) to bytecode
  - EVM bytecode is not machine language
    - although it looks like a set of bits, it is only a representation
Ethereum is like a single-threaded computer
- it can process one transaction at a time
- Sharding of blockchain would improve it and make it like a multithreaded computer
virtual, isolated environment where code (smart contracts) can be executed
- running on the EVM is not directly executed by any single computer, but by all nodes in the Ethereum network
- you can think of JVM(Java Virtual Machine) as the same mechanism
is Turing complete
- contracts contain very little code and their methods require very few instructions to execute
  - usually less than one thousand
  - regular computers execute several billion instructions per second
- to prevent infinite loops and resource exhaustion, the EVM requires users to pay for computation and storage
  - Ethereum Virtual Machine is seen only as quasi-Turing complete
  - payment is made in the form of "gas"
    - a unit of measurement for the amount of computational work required to execute operations
  - since the London hard fork, each block has a target size of 15 million units of gas
    - the actual size of a block will vary depending on network demand
      - protocol achieves an equilibrium block size of 15 million on average through the process of tâtonnement
      - if the block size is greater than the target block size, the protocol will increase the base fee for the following block
      - the protocol will decrease the base fee if the block size is less than the target block size
      - maximum size: 30 million gas (2x the target block size)
        
        means that a block can only contain transactions which cost 30m gas to execute
  - example
    - 3m gas is at maximum 1.5 million instructions (in a very theoretical, unrealistic scenario)
      - example
        
        MSTORE (Memory Store): around 3 gas
        
        SSTORE (Storage Operation):
        
        writing to a new storage slot: Around 20,000 gas (for a 256 bit word)
        
        a kilobyte is thus 640k gas
        
        so if gas ~ 10 gwei
        
        1KB costs 0.0064 ETH
        
        1GB costs 6400 eth (for eth 1.5k USD, ~ 12,000,000 USD)
        
        so a block can only contain instructions that write to storage about 150 times
        
        updating an existing storage slot: Around 5,000 gas
        
        SLOAD (Storage Load): around 200 gas
is deterministic
- running the same code with the same inputs will produce the same results every time
is a stack-based machine

operates using a set of instructions called "opcodes"

opcodes are predefined instructions that the EVM interprets
some operators have operands, but not all
- operator that have operand: PUSH
  - push to the stack
- operator that does not have: ADD
  - takes from the stack, add and push result

example

// Solidity code
function addIntsInMemory(uint a, uint b) public pure returns (uint) {
    uint result = a + b;
    return result;
}

is compiled into operands and operators (opcodes)

PUSH1 0x20      // Load the memory slot size (32 bytes)
MLOAD           // Load 'a' from memory
PUSH1 0x40      // Load the memory slot size (32 bytes)
ADD             // Add 'a' and 'b'
MSTORE          // Store the result back in memory

then it is interpreted to bytecode

bytecode is a set of bytes that must be executed in order, from left to right
- each byte can be
  - an operator (represented by a single byte)
  - a complete operand
  - part of an operand (operands can have more than just 1 byte)
    - example: PUSH20 - used to push a 20-byte (160-bit) value onto the stack
- example
  - ADD opcode is represented as 0x01
  - PUSH1 opcode is represented as 60 and expects a 1-byte operand
  - bytecode to analyse: 0x6001600201 -> 60 01 60 02 01
  - byte 60 is the PUSH1 opcode
    - adds a byte to the Stack
    - The PUSH1 opcode is an operator that expects a 1-byte operand
    - Then the complete statement is 60 01
  - 60 02 // similar
  - final result: number 3 on the Stack
  - digression
    - byte 01 was used both as an operand and operator
    - it’s easy to figure out what it represents in the context of how it was used
- you cannot generate the exact original Solidity source code from the EVM bytecode
  - process of compiling involves
    - optimizations
    - transformations
    - and potentially even loss of information
      - example
        
        during complication the function names and their input parameters are hashed to generate the function selectors
        
        to compute function selector
        
        concatenate the function name and parameter types without spaces or commas: `myFunction(uint256,address)``
        
        calculate the keccak-256 (sha3) hash of the concatenated string
        
        take the first 4 bytes of the hash
can be described as a global decentralized state machine
- more than a distributed ledger
  - analogy of a 'distributed ledger' is often used to describe blockchains like Bitcoin
    - ledger maintains a record of activity which must adhere to a set of rules that govern what someone can and cannot do to modify the ledger
      - example: Bitcoin address cannot spend more Bitcoin than it has previously received
      - Ethereum has its own native cryptocurrency (Ether) that follows almost exactly the same intuitive rules
  - it enables a much more powerful function: smart contracts
- state = the current state of all accounts and smart contracts on the blockchain
  - includes things like account balances, contract storage, and contract code
- each transaction on a blockchain is a transition of state
- EVM is the engine that processes transactions and executes the corresponding smart contract code
  - leads to state changes
  - at any given block in the chain, Ethereum has one and only one 'canonical' state
    - EVM is what defines the rules for computing a new valid state from block to block

gas

is a measure of computational work required to execute operations or transactions on the network
- opcodes have a base gas cost used to pay for executing the transaction
  - example: KECCAK256
    - cost: 30 + 6 for every 256 bits of data being hashed
- there isn't any actual token for gas
  - example: you can't own 1000 gas
  - exists only inside of the Ethereum virtual machine as a count of how much work is being performed
is the fee paid for executing transactions on the Ethereum blockchain
- example
  - simple transaction of moving ETH between two addresses
  - we know that this transaction requires 21,000 units
  - base fee for standard speed at the moment of writing is 20 gwei
  - gas fee = gas units (limit) * gas price per unit (in gwei)
  - 21,000 * 20 = 420,000 gwei
  - 420,000 gwei is 0.00042 ETH, which is at the current prices 0.63 USD (1 ETH = $1500)
gas prices change constantly and there are a number of websites where you can check the current price
- https://etherscan.io/gastracker
if Ether (ETH) was directly used as the unit of transaction cost instead of gas, it would lead to several potential problems:
- reduced flexibility
  - gas allows for adjustments to the cost of computation without affecting the underlying value of Ether
  - if Ether were used directly
    - any change in pricing would directly impact the value of the cryptocurrency
    - it would be difficult to prevent attackers from flooding the network with low-cost transactions
    - cost of computation should not go up or down just because the price of ether changes
      - it's helpful to separate out the price of computation from the price of the ether token
- difficulty in predictability
  - Ether's value can be volatile, which means that transaction costs would fluctuate with the market price
  - this could lead to unpredictable costs for users and could make it more challenging to budget for transactions
is used to
- prevent infinite loops
- computational resource exhaustion
- prioritize transactions on the network
- prevent Sybil attacks
  - by discouraging the creation of a large number of malicious identities
  - solution: prevents an attacker from overwhelming the network with a massive number of transactions
    - as each transaction costs some amount of gas
- solve halting problem
  - problem = it's generally impossible to determine whether that program will eventually halt or continue running indefinitely
  - solution: program will eventually run out of gas and the transaction will be reverted
gas has a price, denominated in ether (ETH)
- users set the gas price they are willing to pay to have their transaction or smart contract executed
- miners prioritize transactions with higher gas prices because they earn the fees associated with the gas
- analogy
  - gas price as the hourly wage for the miner
  - gas cost as their timesheet of work performed
every operation consumes a certain amount of gas
- is paid by users to compensate miners for the computational work they perform
- total gas fee = gas used * gas price
each block has a gas limit
- maximum amount of gas that can be consumed in a block
- transaction sender is refunded the difference between the max fee and the sum of the base fee and tip
some operations can result in a gas refund
- example: if a smart contract deletes a storage slot, it gets a gas refund
  - digression
    - London Upgrade through EIP-3529: remove gas refunds for SELFDESTRUCT, and reduce gas refunds for SSTORE to a lower level
    - practically speaking gas refunds for selfdestruct was not encouraging the freeing up of network space
      - was encouraging the speculation on gas prices (in an extremely inefficient manner) via GAS tokens
      - was filling the blockchain with space-consuming gastokens and transactions just to get some cheap gas back
      - example
        
        during a period of lower gas prices you deploy contractA (called usually GasToken)
        
        during gas prices spike you'd self-destruct contractA and receive gas refund
        
        you can use that gas refund for paying for transaction during spike
- refund is only applied at the end of the transaction
  - the full gas must be made available in order to execute the full transaction
it's important to estimate the gas needed for a transaction or smart contract execution
- if too small => the operation will be reverted and any state changes will be discarded
  - miner still includes it in the blockchain as a "failed transaction", collecting the fees for it
    - sender still pays for the gas consumed up to that point
    - the real work for the miner was in performing the computation
      - they will never get those resources back either
      - it's only fair that you pay them for the work they did, even though your badly designed transaction ran out of gas
- if too big => the excess gas is refunded (refund = max fee - base fee + tip)
  - max fee (maxFeePerGas)
    - maximum limit to pay for their transaction to be executed
    - must exceed the sum of the base fee and the tip
  - providing too big of a fee is also different than providing too much ether
    - if you set a very high gas price, you will end up paying lots of ether for only a few operations
      - similar to super high transaction fee in bitcoin
    - if you provided a normal gas price, however, and just attached more ether than was needed to pay for the gas that your transaction consumed
      - excess amount will be refunded back to you
      - miners only charge you for the work that they actually do
EIP-1559
- implemented in the London Hard Fork upgrade
- went live in August 2021
- introduces a new fee structure that separates transaction fees
  - NOT designed to lower gas fees but to make them more transparent and predictable
  - two components
    - base fee
      - minimum fee required to include a transaction in a block
      - determined by network congestion
        
        example
        
        when the network is busy, the base fee increases
        
        when it's less congested, the base fee decreases
        
        increase/decrease is predictable and will be the same for all users
        
        removing the need for each and every wallets to generate their own individual gas estimation strategies
      - is burned
        
        removed from circulation
        
        reducing the overall supply of Ether
        
        miners have less control over manipulating transaction fees
        
        no reason into bumping base price by putting load on the network
        
        benefits all Ether holders equally, rather than exclusively benefiting validators
        
        creates what EIP-1559 coordinator Tim Beiko refers to as an “ETH buyback” mechanism
        
        ETH is paid back to the protocol and the supply gets reduced
    - priority fee
      - optional tip to incentivize miners to include their transaction in the next block
      - goes directly to the miner
- similar to a delivery service
  - lower fee for regular delivery or a higher fee for express delivery
  - during busy times, like the holiday season, the delivery service may increase the standard delivery fee
    - increase will be set by the delivery company and will affect all customers equally
- comparable to Bitcoin’s difficulty adjustment
- oracles might run into issues under EIP-1559 during periods of high congestion
  - oracles are used when you require off-chain data
    - example: Oraclize or ChainLink
  - they need to provide the pricing information for nearly all of DeFi
    - example: in lending protocols, it influences interest rates and collateral ratios
  - might end up paying incredibly high fees in order to ensure the pricing information reaches the DeFi application in a timely manner
- context: original Ethereum gas fee system
  - simple auction system: unpredictable and inefficient
    - users bid a random amount of money to pay for each transaction
      - we can see a large divergence of transaction fees paid by different users in a single block
        
        many users often overpay by more than 5x
        
        example
    - when the network becomes busy, this system causes gas fees to become high and unpredictable
    - not easy to quick-fix
      - possible improvement: users submit bids as normal, then everyone pays only the lowest bid that was included in the block
        
        can be easily gamed by miners who will fill up their own blocks in order to increase the minimum fee
        
        gameable by transaction senders who collude with miners
  - similar to the way ride-sharing services calculate ride fees
    - when demand for rides is higher, prices go up for everyone who wants a ride
  - problem: Ethereum network becomes busy
    - example
      - CryptoKitty users have reached in excess of 1.5 million(25% of total Ethereal traffic in peak times)
      - trade on a new decentralized cryptocurrency exchange
    - result: users trying to push their transactions by paying absurdly high gas fees
      - gas fees become unpredictable
      - users must guess how much to pay for a transaction
  - as Ethereum has gained new users, the network has become more congested
    - gas fees have become more volatile
    - many users have inadvertently overpaid for their transactions

solidity

minimize on-chain data
- storage operations are over 100x more costly than memory operations
  - OPcodes mload and mstore only cost 3 gas units while storage operations
  - sload and sstore cost at least 100 units
- keep all data off-chain
  - save the smart contract’s critical info on-chain
  - save part of the system (metadata, etc .. ) on a centralized server
- data that does not need to be accessed on-chain can be stored in events
minimize storage read/writes
- save intermediate results in memory and assign results to storage after all calculations
- caching the length in for loops
  - reading array length at each iteration of the loop takes 6 gas
    - 3 for mload and 3 to place memory_offset in the stack.
  - caching the array length in the stack saves around 3 gas per iteration
    - storage => extra sload operation
      - 100 additional extra gas (EIP-2929) for each iteration except for the first
    - memory => extra mload operation
      - 3 additional gas for each iteration except for the first
    - calldata => extra calldataload operation
      - 3 additional gas for each iteration except for the first) These
    - extra costs can be avoided by caching the array length (in the stack)
      uint _length = arr.length

use storage pointers instead of memory

example

mapping(uint256 => User) public users;
User storage _user = users[_id];

is cheaper

mapping(uint256 => User) public users;
User memory _user = users[_id]; // involves copying

use calldata instead of memory
- more cost-effective to load them immediately from calldata
  - does not require copying variables to memory
avoid loops
- it consumes a lot of gas
- it can prevent contract from being carried out beyond the block gas limit
- use mappings
  - except when iteration is required or it is possible to pack data types (arrays are iterable and packable)
minimize the number of storage slots used
- gas cost for storage usage is calculated based on the number of storage slots used
- each storage slot has a size of 256 bits
- you can pack multiple variables within a single storage slot
use 256 byte types
- example: uint256
- EVM performs operations in 256-bit chunks
  - using uint8 means the EVM has to first convert it to uint256
  - conversion costs extra gas
get gas refund for free up storage
- has the same effect as reassigning the value type with its default value
- mappings are unaffected by deletion
  - slots of values are random (based on key hash) and generally unknown
use immutable and constant
- evaluated at compile-time and are stored in the bytecode of the contract
enable the Compiler Optimizer
- several optimization tools available: solc optimizer, Truffle’s build optimizer, and Remix’s Solidity compiler
use short circuit rule
- disjunction: if the first function evaluates to true, the second function is not executed
- conjunction: if the first function evaluates to false, the second function is skipped entirely

move the modifiers require statements into an internal virtual function

modifier code is substituted by compiler to every method that uses this modifier

example

modifier onlyOwner() {
    require(msg.sender == owner, "Only owner can call this function");
    _;
}

into

modifier onlyOwner() {
    _onlyOwner();
    _;

function _onlyOwner() private {
    require(msg.sender == owner, "Only owner can call this function");
}

use Libraries
- extract common functions into a single library and then deploy this library just once
use layer 2 solutions
- works by creating a network of payment channels on top of a blockchain network
- enable offloading of transaction processing from the main Ethereum chain
- solutions
  - rollups
    - transactions occur off-chain on the rollup chain itself
      - only a summary or commitment of the transactions is recorded on the Ethereum mainnet
        
        smart contract on the Ethereum mainnet checks that the commitment is valid
    - smart contract part can be imagined as ERC20
      - balance of each participant is recorded in the contract
      - hundreds "transfer" would be packaged into one transaction
        
        contract can disassemble these "transfer" and verify
      - two merkle trees are used for the record
        
        one is to record addresses, so only an index can represent an address
        
        in rollup transaction recipient's address is replaced by an index value much smaller
        
        the other tree records balance and nonce
        
        rollup transaction does not require a nonce value since it can be computed from the previous state
    - can be further categorized into two types
      - optimistic rollups
        
        assume transaction validity by default unless proven otherwise
        
        require dispute resolution mechanisms in case of fraud or incorrect transaction execution
        
        example: Optimism
      - zero-knowledge (zk)-rollups
        
        use advanced cryptographic techniques to validate transactions
        
        compress and store the user state on-chain in a Merkle tree
        
        transfer the state transition of the user states to the off-chain
        
        zkSNARK proof is used to ensure the correctness of the off-chain state transition
        
        example: ZK-Sync
  - sidechains
    - separate blockchains that are interoperable with the Ethereum mainnet
      - has its own consensus mechanism and can have different rules and features
    - to move assets between the main chain and a sidechain, you typically need to use a bridge
      - involves locking assets on the main chain and minting corresponding tokens on the sidechain
    - example: Polygon, xDai
  - channels
    - parties can exchange an unlimited amount of transactions off-chain
      - example
        
        Alice sends a signed message to Bob saying "I send you 1 ETH"
        
        Bob counter-signs the message, indicating his agreement to the new state
    - only submitting two transactions to the mainchain
      - open the channel
        
        deploy a smart contract
        
        fund smart contract with an initial deposit
      - close the channel
        
        submitting the final state to the smart contract on the mainnet
        
        smart contract verifies the final state and distributes the funds accordingly
    - example: Raiden, Celer Network, Connext
use in-line assembly code
- efficient code that can be executed directly by the EVM without the need for expensive Solidity opcodes
- more precise control over memory and storage usage
don't assigning default values
- every variable assignment in Solidity costs gas
- example
```
uint256 value
```
  is cheaper than
```
uint256 value = 0
```

memory is very cheap to allocate as long as it is small

past a certain point (32 kilobytes) in a single transaction, the memory cost enters into a quadratic section

example

contract smallArraySize {
    // Function Execution Cost = 21,903
    function checkArray() external {
        uint256[100] memory myArr;
    }
}
contract LargeArraySize {
    // Function Execution Cost = 276,750
    function checkArray() external {
        uint256[10000] memory myArr;
    }
}
contract VeryLargeArraySize {
    // Function Execution Cost = 20,154,094
    function checkArray() external {
        uint256[100000] memory myArr;
    }

batching
- consolidate data retrieval by calling a function that returns all the required data instead of making separate calls for each data element
use external function modifiers
- function parameters are not copied into memory but are read directly from the call data
use erc1167 to deploy the same contract many time
- standardized, gas-efficient way to deploy a bunch of contract clones from a factory
- not only minimizes length, but it is also literally a “minimal” proxy that does nothing but proxying
- address in EIP1167 is hardcoded in bytecode and remain unchangeable
- example
  - one of the most famous proxy contract users is Uniswap
    - has a factory pattern to create exchanges for each ERC20 tokens
    - has one exchange instance that contains full bytecode as the program logic, and the remainders are all proxies
    - https://etherscan.io/address/0x09cabec1ead1c0ba254b09efb3ee13841712be14#code
      - a short bytecode, which is unlikely an implementation of an exchange
      - what it does is blindly relay every incoming transaction to the reference contract by delegatecall
    - every proxy is a 100% replica of that contract but serving for different tokens
    - length of the creation code of Uniswap exchange implementation is 12468 bytes
      - proxy contract, however, has only 46 bytes

Name		Name	Last commit message	Last commit date
Latest commit History 21 Commits
contracts		contracts
test		test
.gitignore		.gitignore
LICENSE		LICENSE
README.md		README.md

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

ethereum-gas-workshop

preface

EVM = Ethereum Virtual Machine

gas

solidity

About

Releases

Packages

Languages

License

mtumilowicz/ethereum-gas-workshop

Folders and files

Latest commit

History

Repository files navigation

ethereum-gas-workshop

preface

EVM = Ethereum Virtual Machine

gas

solidity

About

Topics

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages