Skip to content

💥 FlashForge printer FAN speed control firmware fix ( allow to use M106 fan control GCode )

Notifications You must be signed in to change notification settings

moonglow/flashforge_fan_fix

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

8 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

FlashForge

The following GCode commands have been updated:

  • M106 [P<index>] [S<speed>]
  • M107 [P<index>]
P - fan index, 0 - cooling fan (used also if parameter was omitted), 1 - rear case fan
S - speed, from 0 to 255. S255 provides 100% duty cycle, S128 produces 50% and etc
Examples:
M107 P1 - disable rear case fan ( equal to M107 P1 S0 )
M106 S128 - set cooling fan to 50% duty cycle ( equal to M106 P0 S128 )
M106 P1 S200 - for rear case fan, speed is nominal value, it can be only ON/OFF state

GCode controlled temperature limits was raised up to 280°C ( bed and hotend ). GUI menu limits stay same. Make sure what know what you doing with this.


Supported printers:

  • DreamerNX (PWM/REAR FAN/280°C)
  • Dreamer (PWM/REAR FAN/280°C)
  • Creator Max (PWM/REAR FAN/280°C)
  • Guider (PWM/280°C) ( untested )
  • Finder (PWM/280°C) ( untested )
  • Inventor (PWM/REAR FAN/280°C) ( untested )
  • Creator Pro 2 (280°C)