This plugin extends Kirby's ImageMagick Darkroom driver to provide dither and halftone image manipulation. It was loosely inspired by Solar Web Design principles and Ditherpunk aesthetic.

At the moment, it is more a proof-of-concept and not recommended for production.

• Please note that this plugin is not fully ready for production yet, since there are a few issues where it doesn't play nice with Kirby's thumbs component (see below, contributions are appreciated.)

• Thumb generation can get a bit computationally expensive depending on the settings handed to ImageMagick. It is recommended to pre-render your thumbs when using kirby-dither, for example using kirby3-janitor

• Dithering is a somewhat complex topic. What this plugin does, i.e. running a generic, pre-set ImageMagick command on all your images, will always be a compromise. You can get much better results converting your images individually with specific settings. Furthermore, aliasing can get in the way of dithered images rendering as crisp as intended, so on the web it is probably best done client side.

• If your main goal is asset-size reduction, this might not be the plugin for you. While dithered lofi-PNGs can be drastically smaller than high quality JPGs, they are more of a statement. In most use cases, modern image formats such as JPEG XL, AVIF or WebP are a better option.

Tested with Kirby 3.8 and up.

Nota bene: This plugin extends Kirby’s default im Darkroom driver. It therefore might not play nice with plugins which also do that, such as the popular Kirby Focus.

Download and copy this repository to /site/plugins/kirby-dither.

It is recommended to fully clean your /media folder after installation, since already existing thumbs might not be overwritten.

For the plugin to work, you neet to set your Thumbs driver to ImageMagick (im) in your config.php:

return [
  'thumbs' => [
    'driver' => 'im'
  ]
];

kirby-dither provides two file methods, dither() and halftone().

Use them in your template:

// dither
<img src="<?= $image->dither()->url() ?>" alt="">

// halftone effect
<img src="<?= $image->halftone()->url() ?>" alt="">

Furthermore, it should also allow you to set thumbs options in your /site/config/config.php. However, this does not yet work as expected all the time. I have run into issues defining srcset presets, where the dither and halftone option is ignored if you just define resize options. As soon as you set, e.g. 'quality' => 99 or 'grayscale' => true, it works.

Apply dither to all images for a full ditherpunk experience. Depending on your dithering settings (see below), it is recommended to heavily resize images, and use png or gif as output format for a reduced file size:

// in your config
return [
  'thumbs' => [ // ditherpunk galore
    'driver' => 'im',
    'height' => 800,
    'quality' => 96,
    'width' => 800,
    'format' => 'png',
    'dither' => true
  ]
];

Or define a preset:

// in your config
return [
  'thumbs' => [
    'driver' => 'im',
    'presets' => [
      'halftone' => [
        'height' => 800,
        'quality' => 96,
        'width' => 800,
        'format' => 'png',
        'halftone' => true
      ]
    ]
  ]
];

// in your template
$image->thumb('halftone');

Check out the Kirby docs for more information on thumbs options.

The defaults apply a rather over-the-top, unapologetic ‘effect’. However, you can fully control how ImageMagick manipulates your images by setting an option in your config.php:

'mof.dither' => [
  'dither' => '-colors 256 -dither FloydSteinberg',
  'halftone' => '-monochrome -ordered-dither h4x4a'
],

Consult the ImageMagick documentation for more information on what you could do. Note that Kirby's thumbs component constructs the ImageMagick command, so you should only set color quantization and dithering specific commands in this option. Resizing, output file format, etc. are best defined in your thumbs config (see above).

With some dithering settings, it might be beneficial to enable specific image scaling algorithms using CSS:

img.dithered {
    image-rendering:optimizeSpeed;             /* Fallback */
    image-rendering:-moz-crisp-edges;          /* FF */
    image-rendering:-webkit-optimize-contrast; /* Safari */
    image-rendering:optimize-contrast;         /* CSS3 spec */
    image-rendering:crisp-edges;               /* CSS4 spec */
    image-rendering:pixelated;                 /* CSS4 spec */
    -ms-interpolation-mode:nearest-neighbor;   /* IE8+ */
}

Grayscale images can be ‘recolored’ using CSS blend-modes such as hard-light for a nice effect, as seen on Lowtechmag. Note that you need a wrapper around img tags, as coloring the img background does not work:

// CSS
.background-img {
	background-blend-mode: hard-light;
	background-color: #333319;
}

img {
	mix-blend-mode: hard-light;
}

figure {
	background-color: #333319;
}

// HTML
<div class="background-img" style="background-image: url('path/to/image')"></div>

<figure><img alt="" src="path/to/image"/></figure>