I needed this module to control various functions of a few Dino Lite USB microscopes that were not working with standard UVC controls. I did a bunch of reverse engineering to figure out what was being sent in windows to control things like LEDs and autoexposure, that were either not working in Linux with UVC or were not present at all.

import dinoliteuvccontrol

#debug allows some extra messages to be printed to console

class args: debug=True


worker = dinoliteuvccontrol.DinoLiteUVCControl(args)

# module is capable of controlling multiple devices simultaneously;
# if you only have one connected default to index 0

cam0 = worker.ourDevices[0]
cam1 = worker.ourDevices[1]

#Basic LED control
cam0.led_off()
cam0.led_on()

#FLC LED control
cam0.flc_on()
#turn off led 1-4
cam0.toggle_led_1()
cam0.toggle_led_2()
cam0.toggle_led_3()
cam0.toggle_led_4()

#turn led 1-4 back on
cam0.toggle_led_4()
cam0.toggle_led_2()
cam0.toggle_led_1()
cam0.toggle_led_3()

#FLC LED Dim and Brighten, 6 levels
cam0.led_dim()
cam0.led_brighten()

#List standard UVC controls available through this module
cam0.list_standard_controls()

#Get current value of standard controls
cam0.get_standard_control_value("Brightness")

#Set value of standard control
cam0.set_standard_control_value("Brightness", "27")

#Toggle autoexposure
cam0.toggle_auto_exposure()

#Increase and/or decrease exposure time when AE turned off
cam0.increase_exposure_time()
cam0.decrease_exposure_time()

Must have uvcdynctrl installed on your system, this module calls this command a lot. Obviously you will also need a Dino Lite USB microscope, currently the 2 models that I know are working are a168:0980, and a168:0890(with kernel patch applied). Most of the controls only work while the microscope is in use, you can start it up in linux with a command similar to:

mplayer -tv driver=v4l2:gain=1:width=640:height=480:device=/dev/video1:outfmt=yuy2 tv:https://

If you are using the older model a kernel patch will need to be applied. If you are using the newer model no kernel patch is needed. Install uvcdynctrl and video4linux2 if not already installed. Then install this module by doing the following:

#clone this repo and cd into the directory
sudo python setup.py install

Documentation and tests are few and far between, and this module will mainly be consumed by another project that I will be uploading soon. With that in mind pull requests are welcome, as long as it won't break the other project too much.

Please look in kernelpatch.diff to see the details, it is a small one but you will need to rebuild the kernel and boot into the newly built kernel for this to work with the older Dino Lite models. A lot of credit goes to the author of the original kernel patch that I just built upon, Alexandre Macabies [email protected] and the helpful folks on the uvc mailing list

I have tested this patch on several newish versions of the kernel source and have not had an instance where it has failed yet. This was also tested on Raspberry Pi and Orange Pi kernels with no issue.

Also please have a look in Notes.txt for random notes I made along the way while reverse engineering all the proprietary calls. FWIW this was done via virtualbox running on a linux host, with wireshark and usbmon running, and a windows 10 vm with USB passthru.