Copyright 2011-2024 Google LLC.

Disclaimer: This is not an official Google product (experimental or otherwise), it is just code that happens to be owned by Google.

• Introduction
• Installation
  • IDA Pro
  • Binary Ninja
  • Ghidra
• Usage
• How to build
  • Preparing the build environment
  • Linux
  • macOS
  • Windows

BinExport is the exporter component of BinDiff. It is a plugin/extension for the the disassemblers IDA Pro, Binary Ninja and Ghidra that exports disassembly data into the Protocol Buffer format that BinDiff requires.

An experimental version for the open source software reverse engineering suite Ghidra is available in the java/BinExport directory.

This repository contains the complete source code necessary to build BinExport plugin binaries for Linux, macOS and Windows.

Download the binaries from the releases page and copy them into the IDA Pro plugins directory. These are the default paths:

To install just for the current user, copy the files into one of these directories instead:

1. In IDA, select Help|About programm...

2. Click Addons...

3. If installed correctly, the following dialog box appears:

   

Download the binaries from the releases page and copy them into the Binary Ninja plugins directory. These are the default paths for the current user:

1. Start Binary Ninja
2. Select the Log native dock. If this is not visible, enable it via View|Native Docks|Show Log.
3. If installed correctly, the log window contains a line similar to this one:

BinExport 12 (@internal, Jan 3 2023), (c)2004-2011 zynamics GmbH, (c)2011-2024 Google LLC.

1. Download the binaries from the releases page.
2. Start Ghidra, select File|Install Extensions...
3. In the "Install Extensions" dialog, click the plus icon in the upper right to "Add extension".
4. In the "Select extension" dialog, enter the path to the ghidra_BinExport.zip you downloaded in step 1 and click OK.
5. Click OK twice to close both the "Install Extensions" dialog and the notice to restart Ghidra.
6. Exit Ghidra.

1. Start Ghidra
2. Select File|Install Extensions...
3. If installed correctly, the "Install Extensions" dialog should list the "BinExport" extension next to a selected checkbox.

The main use case is via BinDiff. However, BinExport can also be used to export disassembly into different formats:

• Protocol Buffer based full export
• Statistics text file
• Text format for debugging

1. Open an IDA Pro database

2. Select Edit|Plugins|BinExport 12

3. The following dialog box appears:

   

4. Select the type of the file to be exported

The BinExport plugin registers the IDC functions below.

Alternatively, the plugin can be invoked from IDC by calling its main function directly:

static main() {
  batch(0);
  auto_wait();
  load_and_run_plugin("binexport12_ida", 2 /* kBinary */);
  qexit(0);
}

Note that this does provide any control over the output filename. BinExport will always use the filename of the currently loaded database (without extension) and append ".BinExport".

The arguments are the same as for IDC (listed above).

Example invocation of one of the registered IDC functions:

import idaapi
idaapi.ida_expr.eval_idc_expr(None, ida_idaapi.BADADDR,
  'BinExportBinary("exported.BinExport");')

BinExport defines the following plugin options, that can be specified on IDA's command line:

Note: These options must come before any files.

There is only minimal integration into the Binary Ninja UI at this time.

1. Open or create a new analysis database
2. Select Tools|Plugins|BinExport. This will start the export process.

The .BinExport file is placed next to the analysis database, in the same directory.

There is only minimal integration into the Ghidra UI at this time.

1. Open or create a project. For new projects, import a file first using File|Import File...
2. Right-click a file in the current project list and select Export... from the context menu.
3. In the "Export" dialog, under "Format", choose "Binary Export (v2) for BinDiff".
4. Under "Output File", enter the desired output file path. If the file extension is missing, .BinExport will be appended automatically.
5. Optional: click "Options..." to set additional export options.
6. Click "OK", then click "OK" again to dismiss the "Export Results Summary" dialog.

Below are build instructions for the native code plugins for IDA Pro and Binary Ninja. To build the Java-based extension for Ghidra, please refer to the BinExport for Ghidra instructions.

There are quite a few dependencies to satisfy:

• Boost 1.83.0 or higher (a partial copy of 1.83.0 ships in boost_parts)
• CMake 3.14 or higher
• Suggested: Ninja for speedy builds
• GCC 9 or a recent version of Clang on Linux/macOS. On Windows, use the Visual Studio 2019 compiler and the Windows SDK for Windows 10.
• Git 1.8 or higher
• IDA Pro only: IDA SDK 8.0 or higher (unpack into third_party/idasdk)
• Dependencies that will be downloaded:
  • Abseil, GoogleTest and Protocol Buffers (25.2)
  • Binary Ninja SDK

The preferred build environment is Debian 11 ("Bullseye").

This should install all the necessary packages:

sudo apt update -qq
sudo apt install -qq --no-install-recommends build-essential

Install the latest stable version of CMake:

wget https://github.com/Kitware/CMake/releases/download/v3.25.1/cmake-3.25.1-linux-x86_64.sh
mkdir ${HOME}/cmake
sh cmake-3.25.1-Linux-x86_64.sh --prefix=${HOME}/cmake --exclude-subdir
export PATH=${HOME}/cmake/bin:${PATH}

The following sections assume that your current working directory is at the root of the cloned repository.

Unzip the contents of the IDA SDK into third_party/idasdk. Shown commands are for IDA 8.0:

unzip PATH/TO/idasdk_pro80.zip -d third_party/idasdk
mv third_party/idasdk/idasdk_pro80/* third_party/idasdk
rmdir third_party/idasdk/idasdk_pro80

With all prerequisites in place, configure and build BinExport and run its tests:

mkdir -p build_linux && cd build_linux
cmake .. \
    -G Ninja \
    -DCMAKE_BUILD_TYPE=Release \
    "-DCMAKE_INSTALL_PREFIX=${PWD}" \
    -DBINEXPORT_ENABLE_IDAPRO=ON \
    "-DIdaSdk_ROOT_DIR=${PWD}/../third_party/idasdk" \
    -DBINEXPORT_ENABLE_BINARYNINJA=ON \
cmake --build . --config Release
ctest --build-config Release --output-on-failure
cmake --install . --config Release --strip

Note: If you don't want to use Ninja to perform the actual build, omit the -G Ninja part.

To disable the IDA Pro build, set -DBINEXPORT_ENABLE_IDAPRO=OFF. Likewise, to disable the Binary Ninja build, set -DBINEXPORT_ENABLE_BINARYNINJA=OFF.

This will download and build Abseil, GoogleTest, Protocol Buffers and the Binary Ninja API. If all went well, the build_linux/binexport-prefix directory should contain two the files binexport12_ida.so and binexport12_ida64.so (for use with ida and ida64, respectively) as well as binexport12_binaryninja.so (for Binary Ninja).

The preferred build environment is macOS 13 "Ventura" using Xcode 15.1. Using macOS 12 "Monterey" should also work.

After installing the Developer Tools, make sure to install the command-line tools as well:

sudo xcode-select --install

The following sections assume that your current working directory is at the root of the cloned repository.

Download the latest stable version of CMake from the official site and mount its disk image:

curl -fsSL https://github.com/Kitware/CMake/releases/download/v3.25.1/cmake-3.25.1-Darwin-x86_64.dmg \
    -o $HOME/Downloads/cmake-osx.dmg
hdiutil attach $HOME/Downloads/cmake-osx.dmg

At this point you will need to review and accept CMake's license agreement. Now install CMake:

sudo cp -Rf /Volumes/cmake-3.25.1-Darwin-x86_64/CMake.app /Applications/
hdiutil detach /Volumes/cmake-3.25.1-Darwin-x86_64
sudo /Applications/CMake.app/Contents/bin/cmake-gui --install

The last command makes CMake available in the system path.

Unzip the contents of the IDA SDK into third_party/idasdk. Shown commands are for IDA Pro 8.0:

unzip PATH/TO/idasdk_pro80.zip -d third_party/idasdk
mv third_party/idasdk/idasdk_pro80/* third_party/idasdk
rmdir third_party/idasdk/idasdk_pro80

With all prerequisites in place, configure and build BinExport and run its tests:

mkdir -p build_mac && cd build_mac
cmake .. \
    -DCMAKE_BUILD_TYPE=Release \
    "-DCMAKE_INSTALL_PREFIX=${PWD}" \
    -DBINEXPORT_ENABLE_IDAPRO=ON \
    "-DIdaSdk_ROOT_DIR=${PWD}/../third_party/idasdk" \
    -DBINEXPORT_ENABLE_BINARYNINJA=ON \
cmake --build . --config Release -- "-j$(sysctl -n hw.logicalcpu)"
ctest --build-config Release --output-on-failure
cmake --install . --config Release --strip

Note: This will use the standard CMake "Makefile Generator". You can use XCode or Ninja as generators as well.

To disable the IDA Pro build, set -DBINEXPORT_ENABLE_IDAPRO=OFF. Likewise, to disable the Binary Ninja build, set -DBINEXPORT_ENABLE_BINARYNINJA=OFF.

This will download and build Abseil, GoogleTest, Protocol Buffers and the Binary Ninja API. If all went well, the build_mac/binexport-prefix directory should contain two the files binexport12_ida.dylib and binexport12_ida64.dylib (for use with ida and ida64, respectively) as well as binexport12_binaryninja.dylib (for Binary Ninja).

The preferred build environment is Windows 10 (64-bit Intel) using the Visual Studio 2022 compiler and the Windows SDK for Windows 10.

Download and install the latest stable CMake (3.25.1 at the time of writing) from its download page. Make sure to select "Add CMake to the system PATH for all users".

Download and install Git from its download page. Make sure to select the following options: * The installation directory should be left at the default %ProgramFiles%\Git\bin\git.exe * "Use Git from the Windows Command Prompt" - have the setup utility add Git to your system path. * "Use Windows' default console window" - to be able to use Git from the regular command prompt.

The following sections assume an open command prompt with the current working directory located at the root of the cloned BinExport repository:

git clone https://github.com/google/binexport.git
cd binexport

Unzip the contents of the IDA SDK into third_party/idasdk. Shown commands are for IDA 8.0, assuming that Git was installed into the default directory first:

"%ProgramFiles%\Git\usr\bin\unzip" PATH\TO\idasdk_pro80.zip -d third_party
rename third_party\idasdk_pro80 idasdk

With all prerequisites in place, configure and build BinExport:

if not exist build_msvc mkdir build_msvc
cd build_msvc
cmake .. ^
    -G "Visual Studio 17 2022" ^
    -DCMAKE_BUILD_TYPE=Release ^
    "-DCMAKE_INSTALL_PREFIX=%cd%" ^
    -DBINEXPORT_ENABLE_IDAPRO=ON ^
    -DIdaSdk_ROOT_DIR=%cd%\..\third_party\idasdk ^
    -DBINEXPORT_ENABLE_BINARYNINJA=ON
cmake --build . --config Release -- /m /clp:NoSummary;ForceNoAlign /v:minimal
ctest --build-config Release --output-on-failure
cmake --install . --config Release --strip

Note: This will use the CMake "Visual Studio" generator. You can use the Ninja generator as well.

To disable the IDA Pro build, set -DBINEXPORT_ENABLE_IDAPRO=OFF. Likewise, to disable the Binary Ninja build, set -DBINEXPORT_ENABLE_BINARYNINJA=OFF.

This will download and build Abseil, GoogleTest, Protocol Buffers and the Binary Ninja API. If all went well, the build_msvc/binexport-prefix directory should contain two the files binexport12_ida.dll and binexport12_ida64.dll (for use with ida.exe and ida64.exe, respectively) as well as binexport12_binaryninja.dll (for Binary Ninja).