SoftwareUart (adapted from SoftwareSerialWithHalfDuplex)

This library is based off SoftwareSerial from Arduino 1.6.5r5, with half-duplex changes from @nickstedman's SoftwareSerialWithHalfDuplex library.

[SoftwareSerialWithHalfDuplex] (https://github.com/nickstedman/SoftwareSerialWithHalfDuplex) is a simple modification that should definitely be rolled into the SoftwareSerial core library.

This library is an attempt to add greater transparency and useability to SoftwareSerial, but it requires the user to setup a few more things, namely an interrupt routine.

In short the differences to SoftwareSerial are/will be:

• templated - change the buffer size without changing the library!
• HalfDuplex - taken from [SoftwareSerialWithHalfDuplex] (https://github.com/nickstedman/SoftwareSerialWithHalfDuplex)
• flush() call to cli() to stop interrupts was removed (cli() inside write() is needed unfortunately)
• Removed the static functions which are there to enable time sharing of the pinchange interrupt (used to recv() serial data) - your interrupt routine can handle the time sharing! If you dont know what i mean, see how 'active_object' was used. In short the new implementation does not block a pinchange interrupt on bank 0 from blocking pinchange interrupts on every other bank. There will always be interrupt scheduling conflicts, but now the user can manage the conflicts!
• Removed/exposed the pin change interrupts so that developers can make use of them

I do not claim copyright on the code. This is adapted from : NewSoftSerial, SoftwareSerial and SoftwareSerialWithHalfDuplex

SoftwareSerialWithHalfDuplex.h (formerly SoftwareSerial.h) - Multi-instance software serial with half duplex library for Arduino/Wiring

By default the library works the same as the SoftwareSerial library, but by adding a couple of additional arguments it can be configured for half-duplex. In that case, the transmit pin is set by default to an input, with the pull-up set. When transmitting, the pin temporarily switches to an output until the byte is sent, then flips back to input. When a module is receiving it should not be able to transmit, and vice-versa. This library probably won't work as is if you need inverted-logic.

SoftwareSerial.cpp (formerly NewSoftSerial.cpp) - Multi-instance software serial library for Arduino/Wiring -- Interrupt-driven receive and other improvements by ladyada (http:https://ladyada.net) -- Tuning, circular buffer, derivation from class Print/Stream, multi-instance support, porting to 8MHz processors, various optimizations, PROGMEM delay tables, inverse logic and direct port writing by Mikal Hart (http:https://www.arduiniana.org) -- Pin change interrupt macros by Paul Stoffregen (http:https://www.pjrc.com) -- 20MHz processor support by Garrett Mace (http:https://www.macetech.com) -- ATmega1280/2560 support by Brett Hagman (http:https://www.roguerobotics.com/)

This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version.

This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details.

You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA