forked from ffimnsr-archive/ex-vi
-
Notifications
You must be signed in to change notification settings - Fork 0
The old vi source code.
License
mekuto/ex-vi
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
Folders and files
Name | Name | Last commit message | Last commit date | |
---|---|---|---|---|
Repository files navigation
Welcome to the ex/vi port! ========================== 050325 This implementation is derived from ex/vi 3.7 of 6/7/85 and the BSD termcap library, originally from the 2.11BSD distribution. All of them were changed to compile and run on newer POSIX compatible Unix systems. Support for international character sets was added, including support for multibyte locales (based on UTF-8 or East Asian encodings), and some changes were made to get closer to the POSIX.2 guidelines for ex and vi. Some issues that were clearly bugs and not features have also been resolved; see the Changes file for details. New releases are announced on Freshmeat. If you want to get notified by email on each release, use their subscription service at <https://freshmeat.net/projects/vi/>. The project homepage is currently at <https://ex-vi.sourceforge.net>. How to build ============ First look at the Makefile and change the settings there to match your build environment. Explanations are provided directly in this file. You can tune the sizes of some internal buffers by editing config.h. In particular, you will have to raise the size of the 'TUBE' constants if you wish to use really large-sized terminals. Then type 'make' and 'make install'. It is possible to build a RPM file directly from the source distribution by executing rpmbuild -tb ex-<version>.tar.bz2 Note that the RPM spec installs the binary in /usr/5bin by default to avoid conflicts with vendor files in /usr/bin. The default locations match those of the Heirloom Toolchest <https://heirloom.sourceforge.net>. The following systems have been reported to compile this code: Linux Kernel 2.0 and above; libc4, libc5, glibc 2.2 and above, diet libc, uClibc Sun Solaris 2.5.1 and above Caldera Open UNIX 8.0.0 SCO UnixWare 7.1.1, 7.0.1, 2.1.2 HP HP-UX B.11.23, B.11.11, B.11.00, B.10.20 HP Tru64 UNIX 4.0G, 5.1B IBM AIX 5.1, 4.3 NEC SUPER-UX 10.2 NEC UX/4800 Release11.5 Rev.A Control Data EP/IX 2.2.1AA FreeBSD 3.1, 4.5, 5.x NetBSD 1.6, 2.0 Reports about other Unix systems are welcome, whether successful or not (in the latter case add a detailed description). This port of vi is only aimed at Unix, though, so I am not interested about results from running this software on Windows etc. Prerequisites for ports to other systems are: - The system must provide an ANSI C-89 compiler and POSIX.1-1990 functions. - The system must provide an sbrk() call to increase the memory heap size. If only a fake sbrk() call is provided that works by pre-allocating several MB, vi will probably work too. - The system library must allow replacement of malloc() and printf() by the versions provided by vi. For malloc(), it also must make its own internal memory requests using the vi malloc(). Otherwise, vi will likely die with a segmentation fault because the storage allocated by sbrk() interferes with usual Unix library implementations of malloc(). The last two requirements could probably be eliminated with some effort, but it would not result in any real improvements for usual the Unix platforms vi is targeted at, so it has not be done yet. Terminal capabilities ===================== vi normally uses the termcap library to gather information about the capabilities of the terminal it is using. A BSD-derived termcap library is included with the vi distribution, and is usually the preferred choice. On some platforms, though, either no /etc/termcap file exists, or the file lacks up-to-date entries. In these cases, two workarounds are possible. First, vi can be linked against libcurses, libncurses, or libtermcap, if these provide access to a proper terminal information database. Second, it is possible to use the included termcap library with a TERMCAP environment variable that contains a complete termcap entry. Most terminals in current use provide a superset of DEC VT102 capabilities, so the following will normally work: TERMCAP="vt102|$TERM|dec vt102:"'\ :do=^J:co#80:li#24:cl=50\E[;H\E[2J:\ :le=^H:bs:cm=5\E[%i%d;%dH:nd=2\E[C:up=2\E[A:\ :ce=3\E[K:cd=50\E[J:so=2\E[7m:se=2\E[m:us=2\E[4m:ue=2\E[m:\ :md=2\E[1m:mr=2\E[7m:mb=2\E[5m:me=2\E[m:is=\E[1;24r\E[24;1H:\ :rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:ks=\E[?1h\E=:ke=\E[?1l\E>:\ :ku=\EOA:kd=\EOB:kr=\EOC:kl=\EOD:kb=^H:\ :ho=\E[H:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:pt:sr=5\EM:vt#3:\ :sc=\E7:rc=\E8:cs=\E[%i%d;%dr:vs=\E[?7l:ve=\E[?7h:\ :mi:al=\E[L:dc=\E[P:dl=\E[M:ei=\E[4l:im=\E[4h:' export TERMCAP Multibyte locale support ======================== Support for multibyte locales has been added to vi. It requires a number of functions that, while specified in XPG6, are not present on all systems that provide basic multibyte support. In particular, vi needs wcwidth() to determine the visual width of a character, and mbrtowc() to detect when a byte sequence that is entered at the terminal has been completed. The multibyte code is known to work on the following systems: Linux glibc 2.2.2 and later Sun Solaris 9 and later HP HP-UX B.11.11 and later FreeBSD 5.3 NetBSD 2.0 It has been tested on xterm patch #192, rxvt-unicode 4.2, mlterm 2.9.1, and xiterm 0.5. Successful operation is known for the following encodings: UTF-8, EUC-JP, EUC-KR, Big5, Big5-HKSCS, GB 2312, GBK. vi does not support locking-shift encodings like those that use ISO 2022 escape sequences. It also requires that the first byte of any multibyte character has the highest bit set. This excludes 7-bit encodings like UTF-7, and encodings whose sequences start with ASCII characters like TCVN 5712. To use UTF-8 locales in ex mode, the terminal should be put in 'stty iutf8' mode on Linux if it does not perform this automatically. Otherwise, typing the erase key once after entering a multibyte character will result in an incomplete byte sequence. Gunnar Ritter 2/20/05 Freiburg i. Br. Germany <[email protected]>
About
The old vi source code.
Resources
License
Stars
Watchers
Forks
Releases
No releases published
Packages 0
No packages published
Languages
- C 87.4%
- Roff 9.9%
- Makefile 2.0%
- Other 0.7%