Add "MyAVR"-board based morsedecoder

Signed-off-by: Michael Buesch <[email protected]>

myavr_morsedec/Makefile

@@ -0,0 +1,168 @@
+# The architecture configuration
+ARCH := atmega8
+AVRDUDE_ARCH := m8
+AVRDUDE_SPEED := 1
+AVRDUDE_SLOW_SPEED := 100
+PROGRAMMER := avr910
+#PROGRAMMER := avrisp2
+PROGPORT := /dev/ttyUSB0
+#PROGPORT := usb
+
+# The fuse bits
+LFUSE := 0xFB
+HFUSE := 0xD9
+
+# Hardware parameters
+F_CPU := 3686400
+
+BINEXT :=
+NODEPS :=
+
+# The toolchain definitions
+CC := avr-gcc$(BINEXT)
+OBJCOPY := avr-objcopy$(BINEXT)
+SIZE := avr-size$(BINEXT)
+MKDIR := mkdir$(BINEXT)
+MV := mv$(BINEXT)
+RM := rm$(BINEXT)
+CP := cp$(BINEXT)
+ECHO := echo$(BINEXT)
+AVRDUDE := avrdude$(BINEXT)
+MYSMARTUSB := mysmartusb.py
+DOXYGEN := doxygen$(BINEXT)
+
+V := @ # Verbose build: make V=1
+O := s # Optimize flag
+Q := $(V:1=)
+QUIET_CC = $(Q:@=@$(ECHO) ' CC '$@;)$(CC)
+QUIET_DEPEND = $(Q:@=@$(ECHO) ' DEPEND '$@;)$(CC)
+QUIET_OBJCOPY = $(Q:@=@$(ECHO) ' OBJCOPY '$@;)$(OBJCOPY)
+QUIET_SIZE = $(Q:@=@$(ECHO) ' SIZE '$@;)$(SIZE)
+
+CFLAGS := -mmcu=$(ARCH) -std=c99 -g -O$(O) -Wall \
+ "-Dinline=inline __attribute__((__always_inline__))" \
+ -fshort-enums \
+ -DF_CPU=$(F_CPU)
+LDFLAGS :=
+
+# Application code
+SRCS := main.c lcd.c morse.c buzzer.c
+NAME := morsedec
+BIN := $(NAME).bin
+HEX := $(NAME).hex
+EEP := $(NAME).eep.hex
+
+.SUFFIXES:
+.PHONY: all avrdude install_flash install_eeprom install reset writefuse doxygen clean distclean
+.DEFAULT_GOAL := all
+
+ifeq ($(BINEXT),.exe)
+HAVE_MYSMARTUSB :=
+else
+HAVE_MYSMARTUSB := $(shell $(MYSMARTUSB) -h >/dev/null 2>&1 && $(ECHO) 1)
+endif
+
+MYSMARTUSB_PWRCYCLE := \
+ $(if $(HAVE_MYSMARTUSB), \
+ $(MYSMARTUSB) -p0 $(PROGPORT) && \
+ sleep 1 && \
+ $(MYSMARTUSB) -p1 $(PROGPORT) \
+ )
+
+MYSMARTUSB_PROGMODE := \
+ $(if $(HAVE_MYSMARTUSB), \
+ $(MYSMARTUSB) -mp $(PROGPORT) \
+ )
+
+MYSMARTUSB_DATAMODE := \
+ $(if $(HAVE_MYSMARTUSB), \
+ $(MYSMARTUSB) -md $(PROGPORT) \
+ )
+
+DEPS = $(sort $(patsubst %.c,dep/%.d,$(1)))
+OBJS = $(sort $(patsubst %.c,obj/%.o,$(1)))
+
+# Generate dependencies
+$(call DEPS,$(SRCS)): dep/%.d: %.c 
+ @$(MKDIR) -p $(dir $@)
+ @$(MKDIR) -p obj
+ $(QUIET_DEPEND) -o $@.tmp -MM -MT "$@ $(patsubst dep/%.d,obj/%.o,$@)" $(CFLAGS) $<
+ @$(MV) -f $@.tmp $@
+
+ifeq ($(NODEPS),)
+-include $(call DEPS,$(SRCS))
+endif
+
+# Generate object files
+$(call OBJS,$(SRCS)): obj/%.o: %.c
+ @$(MKDIR) -p $(dir $@)
+ $(QUIET_CC) -o $@ -c $(CFLAGS) $<
+
+all: $(HEX)
+
+%.s: %.c
+ $(QUIET_CC) $(CFLAGS) -S $*.c
+
+$(BIN): $(call OBJS,$(SRCS))
+ $(QUIET_CC) $(CFLAGS) -o $(BIN) $(call OBJS,$(SRCS)) $(LDFLAGS) $(LDFLAGS)
+
+$(HEX): $(BIN)
+ $(QUIET_OBJCOPY) -R.eeprom -O ihex $(BIN) $(HEX)
+# $(QUIET_OBJCOPY) -j.eeprom --set-section-flags=.eeprom="alloc,load" \
+# --change-section-lma .eeprom=0 -O ihex $(BIN) $(EEP)
+ $(QUIET_SIZE) $(BIN)
+
+avrdude:
+ $(call MYSMARTUSB_PROGMODE)
+ $(AVRDUDE) -B $(AVRDUDE_SPEED) -p $(AVRDUDE_ARCH) \
+ -c $(PROGRAMMER) -P $(PROGPORT) -t
+ $(call MYSMARTUSB_PWRCYCLE)
+ $(call MYSMARTUSB_DATAMODE)
+
+install_flash: all
+ $(call MYSMARTUSB_PROGMODE)
+ $(AVRDUDE) -B $(AVRDUDE_SPEED) -p $(AVRDUDE_ARCH) \
+ -c $(PROGRAMMER) -P $(PROGPORT) \
+ -U flash:w:$(HEX)
+ $(call MYSMARTUSB_DATAMODE)
+
+install_eeprom: all
+ $(call MYSMARTUSB_PROGMODE)
+ $(AVRDUDE) -B $(AVRDUDE_SPEED) -p $(AVRDUDE_ARCH) \
+ -c $(PROGRAMMER) -P $(PROGPORT) -U eeprom:w:$(EEP)
+ $(call MYSMARTUSB_DATAMODE)
+
+install: install_flash
+ $(call MYSMARTUSB_PWRCYCLE)
+
+# Reset the microcontroller through avrdude
+reset:
+ $(call MYSMARTUSB_PROGMODE)
+ $(AVRDUDE) -B $(AVRDUDE_SPEED) -p $(AVRDUDE_ARCH) \
+ -c $(PROGRAMMER) -P $(PROGPORT) \
+ -U signature:r:/dev/null:i -q -q
+ $(call MYSMARTUSB_PWRCYCLE)
+
+writefuse:
+ $(call MYSMARTUSB_PROGMODE)
+ $(AVRDUDE) -B $(AVRDUDE_SLOW_SPEED) -p $(AVRDUDE_ARCH) \
+ -c $(PROGRAMMER) -P $(PROGPORT) -q -q \
+ -U lfuse:w:$(LFUSE):m \
+ -U hfuse:w:$(HFUSE):m
+ $(call MYSMARTUSB_DATAMODE)
+ $(call MYSMARTUSB_PWRCYCLE)
+
+doxygen:
+ -$(RM) -Rf doc
+ $(MKDIR) doc
+ $(DOXYGEN) Doxyfile
+ $(CP) *.jpg doc/latex/
+ $(CP) *.jpg doc/html/
+ $(MAKE) -C doc/latex pdf
+ $(MV) doc/latex/refman.pdf doc/README-morsedecoder.pdf
+
+clean:
+ -$(RM) -rf obj dep $(BIN) doc/latex
+
+distclean: clean
+ -$(RM) -rf $(patsubst %.c,%.s,$(SRCS)) $(HEX) $(EEP) doc

myavr_morsedec/README-morsedecoder.html

@@ -0,0 +1,8 @@
+<html>
+<head>
+<meta http-equiv="refresh" content="0; url=doc/html/index.html" />
+</head>
+<body>
+<h1><a href="doc/html/index.html">Click here</a></h1>
+</body>
+</html>